1. Главная
  2. Mercedes
  3. ENGINE
  4. OM 352 A
  5. 344.954 MBBRAS
  6. 07 INJECTION PUMP
  7. 001 INJECTION PUMP IL. 2

OM 352 A - 344.954 MBBRAS - 07 INJECTION PUMP

  • Поз.
    Артикул
    Описание
  • 280
    STUD SUPPORT TO INJECTION PUMP M10X35,129616
  • 286
    WASHER BEARING BRACKET TO SIDE MEMBER
  • 289
    NUT SUPPORT TO INJECTION PUMP,129616
  • 295
    SUPPORT , INAPPLICABLE TO ENGINES WITH CAMSHAFT DRIVEN INJECTION TIMING DEVICE
  • 298
    GASKET INJECTION PUMP TO TIMING CASE
  • 298
    GASKET , Replaced By: A3520760280
  • 304
    SCREW PROPELLER SHAFT TO COUPLING FLANGE
  • 307
    DRIVE GEAR
  • 307
    DRIVE GEAR
  • 337
    INJECTION TIMING DEVICE , Replaced By: A3620700045
  • 337
    INJECTION TIMING DEVICE
  • 340
    CAMSHAFT GEAR , 340.930 FROM ENGINE 084456 ONLY APPLICABLE TO ENGINES WITH CAMSHAFT DRIVEN INJECTION TIMING DEVICE
  • 340
    CAMSHAFT GEAR , Replaced By: A3620500004
  • 343
    SCREW
  • 347
    DRIVE GEAR INJECTION PUMP, ONLY APPLICABLE TO ENGINES WITH CAMSHAFT DRIVEN INJECTION TIMING DEVICE 340.930 FROM ENGINE 084456
  • 347
    DRIVE GEAR , Replaced By: A3620700013
  • 350
    SCREW
  • 353
    BALANCE WEIGHT INJECTION TIMING DEVICE, ONLY APPLICABLE TO ENGINES WITH CAMSHAFT DRIVEN INJECTION TIMING DEVICE 340.930 FROM ENGINE 084456
  • 356
    SPRING INJECTION TIMING DEVICE, ONLY APPLICABLE TO ENGINES WITH CAMSHAFT DRIVEN INJECTION TIMING DEVICE 340.930 FROM ENGINE 084456
  • 356
    SPRING , Replaced By: A3669930501
  • 359
    PIN INJECTION TIMING DEVICE, ONLY APPLICABLE TO ENGINES WITH CAMSHAFT DRIVEN INJECTION TIMING DEVICE 340.930 FROM ENGINE 084456
  • 362
    THRUST WASHER INJECTION TIMING DEVICE TO CAMSHAFT, ONLY APPLICABLE TO ENGINES WITH CAMSHAFT DRIVEN INJECTION TIMING DEVICE081396
  • 365
    KEY CONVERTER HOUSING,REAR
  • 368
    SCREW INJECTION TIMING DEVICE TO CAMSHAFT, ONLY APPLICABLE TO ENGINES WITH CAMSHAFT DRIVEN INJECTION TIMING DEVICE081396
  • 368
    SCREW , Replaced By: A3660750071
  • 374
    SHIM, 1.70 MM THICK. SPACER WASHER , Replaced By: A0040171452
  • 374
    SHIM, 1.50 MM THICK. SPACER WASHER1.50 MM, Replaced By: A0030179452
  • 374
    SHIM, 1.80 MM THICK. SPACER WASHER1.80 MM, Replaced By: A0040172452
  • 374
    SHIM, 1.15 MM THICK. SPACER WASHER1.15 MM
  • 374
    SHIM, 1.55 MM THICK. SPACER WASHER1.55 MM
  • 374
    SHIM, 1.75 MM THICK. SPACER WASHER1.75 MM
  • 374
    SHIM, 1.95 MM THICK. SPACER WASHER1.95 MM
  • 374
    SHIM, 1.45 MM THICK. SPACER WASHER1.45 MM
  • 374
    SHIM, 1.90 MM THICK. SPACER WASHER1.9 MM
  • 374
    SHIM, 1.10 MM THICK. SPACER WASHER1.1 MM
  • 374
    SHIM, 1.05 MM THICK. SPACER WASHER1.04 MM,TO 002 017 03 21,002 017 35 21, TO NOZZLE HOLDER OF MAKE: BOSCH
  • 374
    SHIM, 1.30 MM THICK. SPACER WASHER1.3 MM
  • 374
    SHIM, 1.20 MM THICK. SPACER WASHER1.2 MM
  • 374
    SHIM, 1.35 MM THICK. SPACER WASHER1.34 MM, Replaced By: A0030177852
  • 374
    SHIM, 1.0 MM THICK. SPACER WASHER1.0 MM
  • 374
    SHIM, 1.40 MM THICK. SPACER WASHER , Replaced By: A0030178452
  • 374
    SHIM, 1.25 MM THICK. SPACER WASHER1.24 MM
  • 374
    SHIM, 1.85 MM THICK. SPACER WASHER , Replaced By: A0040172852
  • 374
    SPACER WASHER1.70 MM,TO 002 017 03 21,002 017 35 21, TO NOZZLE HOLDER OF MAKE: BOSCH
  • 374
    SHIM, 1.60 MM THICK. SPACER WASHER1.6 MM
  • 374
    SHIM, 1.65 MM THICK. SPACER WASHER1.65 MM
  • 377
    PRESSURE SPRING
  • 380
    SPACER WASHER
  • 380
    SPACER WASHER , Replaced By: A0020172252
  • 383
    PIN , Replaced By: A0000171574
  • 383
    PIN
  • 386
    UNION NUT , Replaced By: A0000174616
  • 389
    NOZZLETO 376 017 81 21
  • 389
    NOZZLETO 001 017 87 21
  • 389
    NOZZLE
  • 392
    SEAL RING , THE OLD PART MUST NO LONGER BE INSTALLED IN THIS PLACE, Replaced By: A3880170160
  • 392
    SEAL RING AS REQUIRED 0.5 MM
  • 392
    SEAL RING NOZZLE HOLDER TO CYLINDER HEAD 1.0 MM
  • 392
    SEAL RING NOZZLE HOLDER TO CYLINDER HEAD 1.5 MM
  • 395
    SCREW
  • 398
    LINE CYLINDER NO.1
  • 398
    LINE CYLINDER NO.1
  • 401
    LINE CYLINDER NO.2
  • 401
    LINE CYLINDER NO.2
  • 404
    LINE CYLINDER NO.3
  • 404
    LINE CYLINDER NO.3
  • 407
    LINE CYLINDER NO.4
  • 407
    LINE CYLINDER NO.4
  • 407
    LINE , FIRST EXHAUST STOCK OF OLD PARTS UP TO ENGINE 935884, Replaced By: A3440707133
  • 410
    LINE , FIRST EXHAUST STOCK OF OLD PARTS UP TO ENGINE 935884, Replaced By: A3440707233
  • 410
    LINE CYLINDER NO.5
  • 410
    LINE CYLINDER NO.5
  • 413
    LINE CYLINDER NO.6
  • 413
    LINE CYLINDER NO.6
  • 413
    LINE , FIRST EXHAUST STOCK OF OLD PARTS UP TO ENGINE 935884, Replaced By: A3440707333
  • 417
    SEAL RING DELIVERY LINES
  • 420
    CLAMPING PIECE ,141595, Replaced By: A0004290540, +001A3660780386
  • 423
    SHIM DELIVERY LINE IN CLAMPING PIECE, UP TO ENGINE 461718 YEAR OF MANUFACTURE 1998
  • 423
    SHIM , Replaced By: A3520780186
  • 426
    CLAMP , Replaced By: A0004290540, +002A3660780386
  • 426
    CLAMP , Replaced By: A0004290540, +002A3660780386
  • 429
    CLAMPING PIECE , Replaced By: A0004290540, +002A6034280284
  • 429
    CLAMPING PIECE , Replaced By: A0004290540, +002A6034280284
  • 432
    SHEET METAL SCREW BRACKET TO CAB
  • 435
    LINE IN ITS PLACE,YOU MAY ALSO USE MERCEDES-BENZ PART NO.: 352 070 02 35
  • 438
    BANJO UNION
  • 441
    SEAL
  • 444
    HOLLOW SCREW FUEL LINES TO SOLENOID VALVE
  • 447
    SCREW PLUG
  • 450
    SEAL RING DELIVERY LINES
  • 453
    WASHER ,D 124754
  • 456
    SCREW PLUG
  • 999
    LEVER PARTS KIT
  • 999
    REPAIR KIT INJECTION PUMP GOVERNOR
  • 999
    CLAMP
  • 999
    SCREW
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]