1. Главная
  2. Mercedes
  3. ENGINE
  4. OM 906 HLA
  5. 902.926
  6. 01 ENGINE HOUSING
  7. 075 CYLINDER HEAD,VALVES,GASKET KIT IL. 1

Mercedes A9060170860 - КОЛЬЦО УПЛОТНИТЕЛЬНОЕ ФОРСУНКИ

OM 906 HLA 902.926
01 ENGINE HOUSING - 075 CYLINDER HEAD,VALVES,GASKET KIT IL. 1
  • Поз.
    Артикул
    Описание
  • 5
    CYLINDER HEAD WITH VALVES WITHOUT CONSTANTLY-OPEN THROTTLE VALVE 36°, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART ORDER ADDITIONALLY: 2X A 906 990 01 17
  • 5
    CYLINDER HEAD WITH VALVES 36°, ORDER ADDITIONALLY: 2X A 906 990 01 17 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART AFTER EXCHANGING THE CYLINDER HEAD ASSY., CHANGE THE SAA ON THE DATA CARD ACCORDING TO REFERENCE TABLE OF THE SI05.30-N-0004A WIS-NET#SI05.30-N-0004A#
  • 5
    CYLINDER HEAD WITH VALVES AND CONSTANT THROTTLE 36°, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART ORDER ADDITIONALLY: 2X A 906 990 01 17
  • 5
    CYLINDER HEAD WITH VALVES AND CONSTANT THROTTLE 36°, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART ORDER ADDITIONALLY: 2X A 906 990 01 17
  • 5
    CYLINDER HEAD WITH VALVES AND CONSTANT THROTTLE 45°, ORDER ADDITIONALLY: 2X A 906 990 01 17 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART, Replaced By: A9060106921, +002A9069900117
  • 5
    CYLINDER HEAD WITH VALVES AND CONSTANT THROTTLE 45°, ORDER ADDITIONALLY: 2X A 906 990 01 17 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART, Replaced By: A9060107621
  • 5
    CYLINDER HEAD WITH VALVES AND CONSTANT THROTTLE 36°, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART, Replaced By: A9060107621
  • 5
    CYLINDER HEAD WITH VALVES WITHOUT CONSTANTLY-OPEN THROTTLE VALVE 36°, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART, Replaced By: A9060108221
  • 5
    CYLINDER HEAD WITH VALVES AND CONSTANT THROTTLE, Replaced By: A9260103120
  • 5
    CYLINDER HEAD WITH VALVES, Replaced By: A9260103220
  • 5
    CYLINDER HEAD WITH VALVES AND CONSTANT THROTTLE 45°, ORDER ADDITIONALLY: 2X A 906 990 01 17 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART, Replaced By: A9260103820
  • 5
    CYLINDER HEAD WITH VALVES 45°, ORDER ADDITIONALLY: 2X A 906 990 01 17 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART, Replaced By: A9260104120
  • 10
    BALL TO PLUG AIR COMPRESSORE OIL BORE,FRONT SIDE
  • 15
    EXPANSION PLUG WATER PASSAGE 36.2 MM
  • 15
    CAP TO PLUG CORE HOLES 34.2
  • 15
    EXPANSION PLUG TO PLUG CORE HOLES 34.2, Replaced By: N000000004057
  • 20
    EXPANSION PLUG PLUG FOR WEB COOLING BORE 13MM
  • 20
    EXPANSION PLUG PLUG FOR WEB COOLING BORE 12MM
  • 25
    EXPANSION PLUG FITTING SIZE + 1.0,604909
  • 25
    EXPANSION PLUG WATER PASSAGE
  • 25
    EXPANSION PLUG P.T.O. HOUSING
  • 30
    BALL TO PLUG OIL CONNECTION TO AIR COMPRESSOR
  • 30
    BALL TO PLUG AIR COMPRESSORE OIL BORE,FRONT SIDE
  • 33
    SCREW BRACING TO 926 010 12 20
  • 33
    SCREW PLUG FRONT AXLE RELAY VALVE "20"
  • 33
    SCREW PLUG
  • 40
    VALVE SEAT RING INTAKE,REPAIR SIZE I 35.37 MM
  • 40
    VALVE SEAT RING EXHAUST,REPAIR SIZE II 40.57 MM 36°
  • 40
    VALVE SEAT RING EXHAUST,STANDARD 40.07 MM36°
  • 40
    VALVE SEAT RING EXHAUST,REPAIR SIZE I 40.37 MM36°
  • 40
    VALVE SEAT RING EXHAUST,REPAIR SIZE II 40.57 MM
  • 40
    VALVE SEAT RING EXHAUST,STANDARD 40.07 MM 36°
  • 40
    VALVE SEAT RING EXHAUST,REPAIR SIZE II 40.57 MM36°
  • 40
    VALVE SEAT RING INTAKE,STANDARD
  • 40
    VALVE SEAT RING INTAKE,REPAIR SIZE II 35.57 MM
  • 40
    VALVE SEAT RING EXHAUST,REPAIR SIZE II 40.37 MM
  • 40
    VALVE SEAT RING EXHAUST,REPAIR SIZE I 40.37 MM 36°
  • 40
    VALVE SEAT RING EXHAUST,STANDARD 40.07 MM 45°, NOTE FOLLOWING WIS DOCUMENT WIS-NET#SI05.30-N-0004A#
  • 45
    VALVE GUIDE INTAKE AND EXHAUST, FITTING SIZE, + 0.2 MM,*0041956
  • 45
    VALVE GUIDE INTAKE AND EXHAUST, FITTING SIZE, + 0.5 MM
  • 45
    VALVE GUIDE INTAKE AND EXHAUST, STANDARD,*0041956
  • 50
    SEAL RING
  • 50
    SEAL RING
  • 55
    SLEEVE PROTECTIVE SLEEVE
  • 60
    EXHAUST VALVE45°, NOTE FOLLOWING WIS DOCUMENT WIS-NET#SI05.30-N-0004A#
  • 60
    EXHAUST VALVE45°, NOTE FOLLOWING WIS DOCUMENT WIS-NET#SI05.30-N-0004A#
  • 60
    EXHAUST VALVE36°
  • 60
    EXHAUST VALVE45°, NOTE FOLLOWING WIS DOCUMENT WIS-NET#SI05.30-N-0004A#
  • 60
    INTAKE VALVE
  • 60
    INTAKE VALVE
  • 60
    INTAKE VALVE
  • 65
    WASHER VALVE SPRING
  • 70
    VALVE SPRING INTAKE
  • 70
    VALVE SPRING OUTLET - ONLY VALID FOR 45 DEGREES, NOTE FOLLOWING WIS DOCUMENT WIS-NET#SI05.30-N-0004A#
  • 70
    VALVE SPRING EXHAUST
  • 70
    VALVE SPRING INTAKE
  • 70
    VALVE SPRING OUTLET - ONLY VALID FOR 36 DEGREES
  • 75
    SPRING RETAINER (VALVE SPRING DISC), Replaced By: A9060530225
  • 75
    VALVE SPRING CAP (VALVE SPRING DISC)
  • 75
    SPRING RETAINER (VALVE SPRING DISC)
  • 80
    VALVE COLLET CONSTANT THROTTLE TO CYLINDER HEAD
  • 85
    SEAL HOLDER. SEAL ,*0039740
  • 85
    SEAL HOLDER. SEAL ,*0039740
  • 90
    VALVE CAP EXHAUST
  • 95
    VALVE CONSTANT THROTTLE,*028996
  • 100
    GUIDE ,*028996
  • 105
    SPRING ,*028996
  • 110
    SPRING RETAINER
  • 115
    VALVE COLLET ,*028996
  • 120
    PISTON ,*028996
  • 130
    COVER
  • 132
    SEAL RING
  • 175
    VALVE BRIDGE ,*0039740
  • 180
    CYLINDER HEAD GASKET CYLINDER HEAD TO CYLINDER CRANKCASE
  • 180
    CYLINDER HEAD GASKET CYLINDER HEAD TO CYLINDER CRANKCASE, Replaced By: A9260161120
  • 180
    CYLINDER HEAD GASKET CYLINDER HEAD TO CYLINDER CRANKCASE, Replaced By: A9260160920
  • 180
    CYLINDER HEAD GASKET CYLINDER HEAD TO CYLINDER CRANKCASE, Replaced By: A9260161220
  • 185
    CYLINDER HEAD BOLT CYLINDER HEAD TO CYLINDER CRANKCASE
  • 240
    NOZZLE HOLDER
  • 240
    NOZZLE HOLDER
  • 240
    NOZZLE HOLDER WITH NOZZLE
  • 240
    NOZZLE HOLDER
  • 245
    O-RING NOZZLE HOLDERS, TOP
  • 253
    SEALING SLEEVE NOZZLE HOLDER TO CYLINDER HEAD, RECOMMENDED FOR TAKING ON STOCK
  • 255
    PIPE SOCKET INJECTION LINE ON NOZZLE HOLDER
  • 255
    PIPE SOCKET INJECTION LINE ON NOZZLE HOLDER, Replaced By: A9060170524
  • 258
    SEAL RING INJECTION LINE ON NOZZLE HOLDER
  • 270
    SCREW NOZZLE HOLDERS
  • 270
    SCREW NOZZLE HOLDERS
  • 300
    CLAMPING BRACKET NOZZLE HOLDER TO CYLINDER HEAD
  • 315
    SCREW NOZZLE HOLDER TO CYLINDER HEAD,*0046893
  • 390
    DS CYLINDER HEAD , CYLINDER HEAD COVER (PLASTIC VERSION) INAPPLICABLE TO MODEL 926.911,912,913,914,915,917,924,929,935, 940,969 ORDER ADDITIONALLY: CHARGE AIR MANIFOLD SEAL
  • 390
    DS CYLINDER HEAD , CYLINDER HEAD COVER (PLASTIC VERSION) ONLY APPLICABLE TO MODEL 926.911,912,913,914,915,917,924,929,935,940,969 ORDER ADDITIONALLY: CHARGE AIR MANIFOLD SEAL
  • 390
    GASKET KIT , CYLINDER HEAD COVER (PLASTIC VERSION) INAPPLICABLE TO MODEL 926.911,912,913,914,915,917,924,929,935, 940,969, Replaced By: A9060108821
  • 390
    DS CYLINDER HEAD , CYLINDER HEAD COVER (PLASTIC VERSION) INAPPLICABLE TO MODEL 926.911,912,913,914,915,917,924,929,935, 940,969, Replaced By: A9060109221
  • 390
    GASKET KIT , CYLINDER HEAD COVER (PLASTIC VERSION) ONLY APPLICABLE TO MODEL 926.919,934,937,939,945,946,947,948,949,959,970,971,972,973,974,975,976 ONLY APPLICABLE TO MODEL 925.920,960, Replaced By: A9260104320
  • 390
    DS CYLINDER HEAD , CYLINDER HEAD COVER (PLASTIC VERSION) ONLY APPLICABLE TO MODEL 926.911,912,913,914,915,917,924,929,935,940,969, Replaced By: A9260104620
  • 400
    BRACKET TRANSMISSION GEARSHIFT
  • 410
    BRACKET TRANSMISSION GEARSHIFT
  • 415
    HEXALOBULAR BOLT BRACKET TO BRACKET M 10X30
  • 420
    SCREW INJECTION PUMP TO CRANKCASE
  • 423
    FLANGE TO LOCK COOLING WATER CONNECTION
  • 426
    GASKET TO LOCK COOLING WATER CONNECTION
  • 429
    HEXAGON HEAD BOLT BRACKET TO BRACKET M8X25
  • 432
    SCREW PLUG LOAD/NO-LOAD VALVE,CONNECTION: "21"
  • 432
    SCREW PLUG FUEL TANK
  • 435
    SEALING RING. SCREW TO PLUG LONGITUDINAL OIL DUCT,FAN SIDE
  • 435
    SEALING RING
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]