1. Главная
  2. Mercedes
  3. CAR
  4. TYP 219 BM 105.010, .011
  5. 105.010
  6. 03 MOVING PARTS
  7. 003 MOVING PARTS

TYP 219 BM 105.010, .011 - 105.010 - 03 MOVING PARTS

  • Поз.
    Артикул
    Описание
  • 1
    CRANKSHAFT WITH COUNTERWEIGHT, FLYWHEEL AND FITTED MAIN BEARING SHELLS AND CONNECTING ROD BEARING SHELLS OPTIONAL FROM ENGINE 7504073
  • 2
    SPACER RING, 5.45-MM THICK FOR VIBRATION DAMPER AT CRANKSHAFT OPTIONAL
  • 4
    CRANKSHAFT GEAR. KURBELWELLENRAD 20 ZAHNE FUR STEUERUNGSANTRIEB AB MOTOR-NR. 00097/52
  • 5
    SPACER RING ON CRANKSHAFT, FRONT
  • 6
    OIL SLINGER RING ON CRANKSHAFT, FRONT
  • 8
    COLLAR SCREW
  • 9
    FLYWHEEL WITH RING GEAR FROM ENGINE 7504073
  • 10
    STARTER RING
  • 12
    EXPANDING SCREW FOR FLYWHEEL AT CRANKSHAFT
  • 13
    SEALING RING AT CRANKSHAFT, FRONT
  • 14
    PULLEY WITH SLIP RING ON CRANKSHAFT
  • 15
    FRICTION PLATE. SCHLEIFSCHEIBE FUR SCHWINGUNGSDAMPFER
  • 16
    DAMPER RING. SCHWUNGRING FUR SCHWINGUNGSDAMPFER AB MOTOR-NR. 00201/51
  • 17
    SHEAR RUBBER. SCHERGUMMI FUR SCHWINGUNGSDAMPFER AB MOTOR-NR. 00201/51
  • 18
    PRESSURE SPRING FOR VIBRATION DAMPER
  • 22
    LOCKING RING. VERSCHLUSSDECKEL IN DER KURBELWELLE HINTEN FUR GETRIEBE-ANTRIEBSWELLE
  • 24
    SET OF CRANKSHAFT BEARING SHELLS, INTERIOR DIA. 60-MMSTANDARD READY FOR INSTALLATION OPTIONAL
  • 25
    CRANKSHAFT BEARING SHELL, UPPER HALF OPTIONAL
  • 26
    CRANKSHAFT BEARING SHELL, LOWER HALF OPTIONAL
  • 29
    CONNECTING ROD WITH BUSHING WITHOUT BEARING
  • 30
    CONNECTING ROD BUSHING, 27X21.6X30 STANDARD FROM ENGINE 8500605
  • 31
    CONNECTING ROD SCREW. CONNECTING-ROD SCREW
  • 32
    NUT , UP TO ENGINE 920 10/50,20/60 073205 920 12/52,22/62 019059 921 003475 923 10/50,20/60 092627 923 12/52,22/62 015750 UP TO ENGINE 924 10/50,20/60 002127 924 12/52,22/62 000138 926 10/50,20/60 004380 926 12/52,22/62 000145 UP TO ENGINE 927 000685 928 000871 929 000007
  • 33
    CONNECTING ROD BEARING HALF INTERIOR DIA. 48.00 MMSTANDARD (READY FOR INSTALLATION) OPTIONAL
  • 34
    PISTON WITH PISTON PIN AND PISTON RINGS FOR CYLINDER DIA. 80.00-MMSTANDARD, COMPRESSION RING FOR GROOVE I, 2-MM HIGH
  • 35
    COMPRESSION RING 2-MM HIGH FOR GROOVE I TO PISTON 180 030 45 17
  • 37
    NOVIX STEPPED RING FOR GROOVE III
  • 38
    NOVIX SLOTTED RING FOR GROOVE IV
  • 999
    NOVIX STEPPED RING FOR GROOVE III
  • 999
    NOVIX STEPPED RING FOR GROOVE III
  • 999
    NOVIX STEPPED RING FOR GROOVE III
  • 999
    NOVIX STEPPED RING FOR GROOVE III
  • 999
    NOVIX SLOTTED RING FOR GROOVE IV
  • 999
    NOVIX SLOTTED RING FOR GROOVE IV
  • 999
    NOVIX SLOTTED RING FOR GROOVE IV
  • 999
    NOVIX SLOTTED RING FOR GROOVE IV
  • 999
    COMPRESSION RING 2.5-MM HIGH FOR GROOVE I TO PISTON 180 030 35 17/40 17
  • 999
    COMPRESSION RING 2-MM HIGH FOR GROOVE I TO PISTON 180 030 46 17/51 17
  • 999
    COMPRESSION RING 2-MM HIGH FOR GROOVE I TO PISTON 180 030 47 17/52 17
  • 999
    COMPRESSION RING 2-MM HIGH FOR GROOVE I TO PISTON 180 030 48 17/53 17
  • 999
    COMPRESSION RING 2-MM HIGH FOR GROOVE I TO PISTON 180 030 49 17/54 17
  • 999
    COMPRESSION RING 2.5-MM HIGH FOR GROOVE I TO PISTON 180 030 36 17/41 17
  • 999
    COMPRESSION RING 2.5-MM HIGH FOR GROOVE I TO PISTON 180 030 37 17/42 17
  • 999
    COMPRESSION RING 2.5-MM HIGH FOR GROOVE I TO PISTON 180 030 38 17/43 17
  • 999
    COMPRESSION RING 2.5-MM HIGH FOR GROOVE I TO PISTON 180 030 39 17/44 17
  • 999
    SPACER SLEEVE IN CRANKSHAFT FOR GROOVED BEARING UP TO ENGINE 6510419
  • 999
    FLYWHEEL WITH RING GEAR UP TO ENGINE 7504072
  • 999
    FLYWHEEL WITH RING GEAR
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INTERIOR DIA. 59.75-MMREPAIR SIZE I READY FOR INSTALLATION OPTIONAL
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INTERIOR DIA. 59.50-MMREPAIR SIZE II READY FOR INSTALLATION OPTIONAL
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INTERIOR DIA. 59.25-MMREPAIR SIZE III READY FOR INSTALLATION OPTIONAL
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INTERIOR DIA. 59.00-MMREPAIR SIZE IV READY FOR INSTALLATION OPTIONAL
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INTERIOR DIA. 60-MMSTANDARD READY FOR INSTALLATION OPTIONAL
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INTERIOR DIA. 59.75-MMREPAIR SIZE I READY FOR INSTALLATION OPTIONAL
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INTERIOR DIA. 59.50-MMREPAIR SIZE II READY FOR INSTALLATION OPTIONAL
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INTERIOR DIA. 59.25-MMREPAIR SIZE III READY FOR INSTALLATION OPTIONAL
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INTERIOR DIA. 59.00-MMREPAIR SIZE IV READY FOR INSTALLATION OPTIONAL
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INTERIOR DIA. 60-MMSTANDARD READY FOR INSTALLATION OPTIONAL
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INTERIOR DIA. 59.75-MMREPAIR SIZE I READY FOR INSTALLATION OPTIONAL
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INTERIOR DIA. 59.50-MMREPAIR SIZE II READY FOR INSTALLATION OPTIONAL
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INTERIOR DIA. 59.25-MMREPAIR SIZE III READY FOR INSTALLATION OPTIONAL
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INTERIOR DIA. 59.00-MMREPAIR SIZE IV READY FOR INSTALLATION OPTIONAL
  • 999
    , Replaced By: A1800303401
  • 999
    , Replaced By: A1800303401
  • 999
    CRANKSHAFT WITH COUNTERWEIGHT, FLYWHEEL AND FITTED MAIN BEARING SHELLS AND CONNECTING ROD BEARING SHELLS OPTIONAL UP TO ENGINE 7504072
  • 999
    , Replaced By: A1800304517
  • 999
    CRANKSHAFT WITH COUNTERWEIGHT, FLYWHEEL AND FITTED MAIN BEARING SHELLS AND CONNECTING ROD BEARING SHELLS OPTIONAL, Replaced By: A1800303401
  • 999
    , Replaced By: A1800305117
  • 999
    , Replaced By: A1800305217
  • 999
    , Replaced By: A1800305317
  • 999
    , Replaced By: A1800305417
  • 999
    PISTON WITH PISTON PIN AND PISTON RINGS FOR CYLINDER DIA. 80.00-MMSTANDARD, COMPRESSION RING FOR GROOVE I, 2-MM HIGH, Replaced By: A1800304517
  • 999
    , Replaced By: A1800305117
  • 999
    , Replaced By: A1800305217
  • 999
    , Replaced By: A1800305317
  • 999
    , Replaced By: A1800305417
  • 999
    PISTON WITH PISTON PIN AND PISTON RINGS FOR CYLINDER DIA. 80.25-MMREPAIR SIZE I, COMPRESSION RING FOR GROOVE I, 2MM HIGH, Replaced By: A1800305117
  • 999
    PISTON WITH PISTON PIN AND PISTON RINGS FOR CYLINDER DIA. 80.50-MMREPAIR SIZE II, COMPRESSION RING FOR GROOVE I, 2-MM HIGH, Replaced By: A1800305217
  • 999
    REPLACED BY 180 030 60 01 OPTIONAL, Replaced By: A1800306001
  • 999
    PISTON WITH PISTON PIN AND PISTON RINGS FOR CYLINDER DIA. 81.00-MMREPAIR SIZE III, COMPRESSION RING FOR GROOVE I, 2-MM HIGH, Replaced By: A1800305317
  • 999
    REPLACED BY 180 030 61 01 OPTIONAL, Replaced By: A1800306101
  • 999
    PISTON WITH PISTON PIN AND PISTON RINGS FOR CYLINDER DIA. 81.50-MMREPAIR SIZE IV, COMPRESSION RING FOR GROOVE I, 2-MM HIGH, Replaced By: A1800305417
  • 999
    PISTON WITH PISTON PIN AND PISTON RINGS FOR CYLINDER DIA. 80.25-MMREPAIR SIZE I, COMPRESSION RING FOR GROOVE I, 2MM HIGH
  • 999
    PISTON WITH PISTON PIN AND PISTON RINGS FOR CYLINDER DIA. 80.50-MMREPAIR SIZE II, COMPRESSION RING FOR GROOVE I, 2-MM HIGH
  • 999
    PISTON WITH PISTON PIN AND PISTON RINGS FOR CYLINDER DIA. 81.00-MMREPAIR SIZE III, COMPRESSION RING FOR GROOVE I, 2-MM HIGH
  • 999
    CRANKSHAFT WITH COUNTERWEIGHT, FLYWHEEL AND FITTED MAIN BEARING SHELLS AND CONNECTING ROD BEARING SHELLS OPTIONAL, Replaced By: A1800306001
  • 999
    PISTON WITH PISTON PIN AND PISTON RINGS FOR CYLINDER DIA. 81.50-MMREPAIR SIZE IV, COMPRESSION RING FOR GROOVE I, 2-MM HIGH
  • 999
    CRANKSHAFT WITH COUNTERWEIGHT, FLYWHEEL AND FITTED MAIN BEARING SHELLS AND CONNECTING ROD BEARING SHELLS OPTIONAL, Replaced By: A1800306101
  • 999
    CRANKSHAFT WITH COUNTERWEIGHT, FLYWHEEL AND FITTED MAIN BEARING SHELLS AND CONNECTING ROD BEARING SHELLS OPTIONAL
  • 999
    SPACER RING,. AUSGLEICHRING 5,60 MM ST. WAHLWEISE ZWISCHEN KURBELWELLENRAD UND KURBELWELLE
  • 999
    SPACER RING,. AUSGLEICHRING 5,75 MM ST. WAHLWEISE ZWISCHEN KURBELWELLENRAD UND KURBELWELLE
  • 999
    SPACER RING,. SHIM, 5.90 MM THICK OPTIONAL FOR CRANKSHAFT GEAR AT CRANKSHAFT
  • 999
    SPACER RING,. SHIM, 6.05 MM THICK OPTIONAL FOR CRANKSHAFT GEAR AT CRANKSHAFT
  • 999
    COUNTERWEIGHT , Replaced By: A1800311307
  • 999
    COUNTERWEIGHT FOR REPAIRS
  • 999
    STARTER RING GEAR UP TO ENGINE 7504072
  • 999
    ADJUSTMENT POINTER
  • 999
    STARTER RING GEAR
  • 999
    CRANKSHAFT BEARING SHELL, LOWER PART OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, LOWER HALF OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, LOWER HALF OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, LOWER HALF OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, UPPER HALF OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, UPPER HALF OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, UPPER HALF OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, UPPER HALF OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, LOWER HALF OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, LOWER HALF OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, LOWER HALF OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, LOWER HALF OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, LOWER HALF OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, LOWER HALF
  • 999
    CRANKSHAFT BEARING SHELL, LOWER HALF OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, LOWER HALF OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, UPPER HALF OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, LOWER HALF OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, UPPER HALF OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, LOWER HALF OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, UPPER HALF OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, UPPER HALF OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, UPPER HALF OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, UPPER HALF
  • 999
    CRANKSHAFT BEARING SHELL, UPPER HALF OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, UPPER HALF OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, UPPER HALF OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, UPPER HALF OPTIONAL
  • 999
    CONNECTING ROD BUSHING, 25X21.6X30 STANDARD UP TO ENGINE 8500604
  • 999
    CONNECTING ROD. PLEUELBUCHSE AUSSEN-O 25,5-MM FUR REP.-AUSFUHRU
  • 999
    CONNECTING ROD BUSHING, EXTERIOR DIA. 27.5-MM FOR REPAIRS FROM ENGINE 8502673
  • 999
    CONNECTING ROD BEARING HALF INTERIOR DIA. 47.75 MMREPAIR SIZE I (READY FOR INSTALLATION) OPTIONAL
  • 999
    CONNECTING ROD BEARING HALF INTERIOR DIA. 47.50 MMREPAIR SIZE II (READY FOR INSTALLATION) OPTIONAL
  • 999
    CONNECTING ROD BEARING HALF INTERIOR DIA. 47.25 MMREPAIR SIZE III (READY FOR INSTALLATION) OPTIONAL
  • 999
    CONNECTING ROD BEARING HALF INTERIOR DIA. 47.00 MMREPAIR SIZE IV (READY FOR INSTALLATION) OPTIONAL
  • 999
    CONNECTING ROD BEARING HALF INTERIOR DIA. 48.00 MMSTANDARD (READY FOR INSTALLATION) OPTIONAL
  • 999
    CONNECTING ROD BEARING HALF INTERIOR DIA. 47.75 MMREPAIR SIZE I (READY FOR INSTALLATION) OPTIONAL
  • 999
    CONNECTING ROD BEARING HALF INTERIOR DIA. 47.50 MMREPAIR SIZE II (READY FOR INSTALLATION) OPTIONAL
  • 999
    CONNECTING ROD BEARING HALF INTERIOR DIA. 47.25 MMREPAIR SIZE III (READY FOR INSTALLATION) OPTIONAL
  • 999
    CONNECTING ROD BEARING HALF INTERIOR DIA. 47.00 MMREPAIR SIZE IV (READY FOR INSTALLATION) OPTIONAL
  • 999
    CONNECTING ROD BEARING HALF INTERIOR DIA. 48.00 MMSTANDARD (READY FOR INSTALLATION) OPTIONAL
  • 999
    CONNECTING ROD BEARING HALF INTERIOR DIA. 47.75 MMREPAIR SIZE I (READY FOR INSTALLATION) OPTIONAL
  • 999
    CONNECTING ROD BEARING HALF INTERIOR DIA. 47.50 MMREPAIR SIZE II (READY FOR INSTALLATION) OPTIONAL
  • 999
    CONNECTING ROD BEARING HALF INTERIOR DIA. 47.25 MMREPAIR SIZE III (READY FOR INSTALLATION) OPTIONAL
  • 999
    CONNECTING ROD BEARING HALF INTERIOR DIA. 47.00 MMREPAIR SIZE IV (READY FOR INSTALLATION) OPTIONAL
  • 999
    PULLEY WITH SLIP RING ON CRANKSHAFT, Replaced By: A1802001505
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]