1. Главная
  2. Mercedes
  3. ENGINE
  4. OM 457 LA
  5. 457.948
  6. 14 INTAKE AND EXHAUST MANIFOLDS
  7. 400 ADBLUE METERING DEVICE IL. 1

Mercedes A0009957610 - ХОМУТ

OM 457 LA 457.948
14 INTAKE AND EXHAUST MANIFOLDS - 400 ADBLUE METERING DEVICE IL. 1
  • Поз.
    Артикул
    Описание
  • 5
    METERING EQUIPMENT
  • 5
    METERING DEVICE WITHOUT DIFFUSOR HEATER, NOTE FOLLOWING WIS DOCUMENT WIS-NET#AR14.40-W-2036C# WHEN REMOVING THE NOZZLE OR METERING UNIT, THE PRESS. LINE TOTHE ADBLUE INJECTION NOZZLE MUST BE REPL. IF A METERING DEVICE WITH DIFFUSER HEATER IS RETROFITTED IN A VEHICLE, PLEASE ALSO ORDER: 1 X A 001 546 86 41,1 X A 002 997 11 71,1 X A 016 997 49 45, 1 X A 000 995 62 35,1 X A 906 150 75 33, Replaced By: A0001400539
  • 5
    METERING DEVICE , Replaced By: A0001400739
  • 5
    METERING EQUIPMENT , Replaced By: A0001404139
  • 8
    FITTING , Replaced By: A0029977871
  • 8
    SCREW-IN FITTING. FITTING
  • 8
    FITTING COMPRESSED-AIR-LINE PLUG-CONNECTION
  • 9
    SEAL RING10X13,5MM
  • 10
    BUSHING TO METERING DEVICE OUTPUT
  • 12
    SEALING RING. SEAL RING
  • 14
    FILTER ADBLUE METERING DEVICE TO A000 140 05 78
  • 17
    PRESSURE SENSOR
  • 17
    SENDER UNIT , EXHAUST STOCK OF OLD PARTS UP TO ENGINE 428961, Replaced By: A0061534328
  • 17
    SENDER UNIT , Replaced By: A0061537428
  • 20
    SENDER UNIT , EXHAUST STOCK OF OLD PARTS UP TO ENGINE 404666, Replaced By: A0061534428
  • 20
    SENDER UNIT , Replaced By: A0061537528
  • 20
    PRESSURE SENSOR
  • 22
    BUSHING
  • 23
    TEMPERATURE SENSOR. SENDER UNIT
  • 24
    NOZZLE HEATED
  • 25
    SEAL RING P.T.O. CONTROL
  • 26
    SCREW LOCKING BOLT M8X65,V 208920
  • 26
    HEXAGON HEAD BOLT. SCREW CLUTCH PRESSURE PLATE TO FLYWHEEL M 8X1,25X60
  • 32
    COVER PLATE ADBLUE METERING DEVICE
  • 32
    HEAT SHIELD ADBLUE METERING DEVICE
  • 32
    SCREENING PLATE ADBLUE METERING DEVICE
  • 32
    COVER PLATE ADBLUE METERING DEVICE, FIRST EXHAUST STOCK OF OLD PARTS UP TO ENGINE 108846, Replaced By: A4571400634
  • 33
    FITTING , THE OLD PART MUST NO LONGER BE INSTALLED, Replaced By: A0029971171
  • 33
    FITTING WITH O-RING
  • 33
    FITTING
  • 34
    SCREW-IN FITTING. FITTINGTO A 000 140 07 39
  • 34
    SCREW-IN FITTING WITH O-RING
  • 35
    SEAL RING10X13,5MM
  • 36
    SEALING RING. SEAL RINGTO A 000 140 05 39
  • 37
    CONNECTOR ADBLUE
  • 38
    SCREW INJECTION NOZZLE TO THROTTLE HOUSING
  • 39
    WATER NOZZLE ADBLUE
  • 40
    PRESSURE LINE ADBLUE METERING DEVICE
  • 40
    DELIVERY LINE ADBLUE METERING DEVICE, THE OLD PART MUST NO LONGER BE INSTALLED, Replaced By: A4571402155
  • 41
    AIR LINE TO METERING DEVICE INPUT
  • 42
    BANJO UNION
  • 43
    GLAND , Replaced By: A0019901667
  • 44
    UNION NUT LINE CONNECTIONS
  • 45
    PRESSURE LINE TO METERING DEVICE OUTPUT
  • 45
    DELIVERY LINE TO METERING DEVICE OUTPUT
  • 47
    PRESSURE LINE MOLDED HOSE TO PRESSURE LINE
  • 47
    HOSE MOLDED HOSE TO PRESSURE LINE
  • 50
    CLAMP GUIDE TUBE TO BRACKET
  • 50
    CLAMP
  • 50
    CLAMP HYDRAULIC LINE TO SIDE MEMBER,RB012797
  • 53
    HEXALOBULAR BOLT BRACKET TO REAR AXLE M10X16
  • 53
    HEXAGON HEAD BOLT CONTROL ARM, LINKAGE ADJUSTER ON BEARING BRACKET M8X12
  • 53
    HEXAGON HEAD BOLT. SCREW CLUTCH TO FLYWHEEL M8X16 MM
  • 56
    NUT ENGINE MOUNTING M8
  • 62
    CLAMP MOUNTING PARTS 13.7-16.2MM
  • 62
    HOSE CLAMP15MM
  • 65
    HOLLOW SCREW LINE CONNECTION
  • 67
    HOLLOW SCREW FITTING COMPRESSED AIR LINE TO OPERATING CYLINDER
  • 68
    SEALING RING TEST CONNECTION
  • 69
    TEST CONNECTION FILLING CONNECTION
  • 69
    TEST CONNECTION WITH SCREW FITTING VOSS
  • 72
    IONIC EXCHANGER , REPLACEMENT PART MAY NO LONGER BE INSTALLED,SEE SERVICE MEASURE
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]