1. Главная
  2. Mercedes
  3. CAR
  4. S 320
  5. 220.165
  6. 35 REAR AXLE
  7. 045 REAR SUBFRAME

Mercedes A2203570075 -

S 320 220.165
35 REAR AXLE - 045 REAR SUBFRAME
  • Поз.
    Артикул
    Описание
  • 10
    REAR SUBFRAME WITH RUBBER MOUNTING
  • 10
    REAR AXLE CARRIER WITHOUT RUBBER MOUNT
  • 10
    REAR SUBFRAME WITH RUBBER MOUNTING
  • 10
    REAR SUBFRAME WITH RUBBER MOUNTING
  • 10
    REAR SUBFRAME WITH RUBBER MOUNTING, Replaced By: A2203503541
  • 15
    RUBBER MOUNT SPRING LINK TO REAR AXLE BRACKET RIGHT, THE OLD PART MUST NO LONGER BE INSTALLED, Replaced By: A2203521365
  • 15
    RUBBER MOUNT SPRING LINK TO REAR AXLE BRACKET LEFT
  • 15
    SPRING CONTROL ARM SSP. SPRING CONTROL ARM TO REAR SUBFRAME
  • 20
    RUBBER MOUNT AXLE HOUSING TO REAR SUBFRAME,REAR
  • 25
    EXPANSION PLUG VENTILATION BORE IN WHEELHOUSE, ONLY FOR REPAIR PURPOSES
  • 30
    RS AXLE BRACKET FRONT
  • 35
    STOP FRONT
  • 40
    BOLT. SCREW REAR SUBFRAME TO FRAME FLOOR UNIT, FRONT
  • 40
    BOLT REAR SUBFRAME TO FRAME FLOOR UNIT,REAR M12X1,5X101
  • 50
    RS AXLE BRACKET REAR
  • 60
    BOLT REAR SUBFRAME TO FRAME FLOOR UNIT,REAR M12X1,5X101
  • 60
    BOLT. SCREW REAR SUBFRAME TO FRAME FLOOR UNIT, FRONT
  • 75
    BOLT FRONT RUBBER MOUNTING
  • 80
    NUT LEVER TO THROTTLE VALVE SHAFT TO 366 140 02 32
  • 90
    EXTENSION AXLE HOUSING TO EXTENSION, FRONT, Replaced By: A2203500915
  • 90
    EXTENSION AXLE HOUSING TO EXTENSION, FRONT
  • 105
    BEARING TUBE EXTENSION TO REAR SUBFRAME,FRONT
  • 110
    HEXALOBULAR BOLT EXTENSION TO REAR SUBFRAME,FRONT M14X90
  • 120
    WASHER SPRING CONTROL ARM TO REAR SUBFRAME
  • 120
    WASHER EXTENSION TO REAR SUBFRAME,FRONT
  • 130
    HEXAGON NUT STEER. KNUCKLE TO TRAN. CON. ARM RIGHT M14X1,5
  • 150
    WASHER AXLE HOUSING TO REAR SUBFRAME,FRONT
  • 170
    HEXALOBULAR BOLT AXLE HOUSING TO EXTENSION, FRONT, A 08781019991028
  • 170
    HEXALOBULAR BOLT AXLE HOUSING TO EXTENSION, FRONT M10X90, A 08780919991028
  • 180
    SPACER WASHER AS REQUIRED 3.0 MM
  • 180
    SPACER WASHER AS REQUIRED 2.0 MM
  • 180
    SPACER WASHER AS REQUIRED 4.0 MM
  • 180
    SPACER WASHER NUMBER OF NOTCHES: 2 X 1 (1 MM ), TO BE USED ON REAR SUBFRAME LESS STAMPED-ON CHARACTERISTIC NUMBER 0F 8MM
  • 190
    WASHER DUMPING PLATFORM MOUNTING
  • 200
    HEXAGON HEAD BOLT. SCREW REINFORCEMENT TO SIDE MEMBER M 12X55
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]