1. Главная
  2. Mercedes
  3. CAR
  4. C 250 CDI
  5. 204.003 DOKU NICHT KOMPLETT! NUR Fu00dcR KFE FZG
  6. 33 FRONT AXLE
  7. 030 STEERING KNUCKLE AND CONTROL ARM

C 250 CDI - 204.003 DOKU NICHT KOMPLETT! NUR Fu00dcR KFE FZG - 33 FRONT AXLE

  • Поз.
    Артикул
    Описание
  • 10
    STEERING KNUCKLE LEFT
  • 10
    STEERING KNUCKLE RIGHT
  • 20
    CIRCUMFERENTIAL GASKET BETWEEN RPM SENSOR AND STEERING KNUCKLE
  • 30
    FRONT WHEEL HUB , IN CASE OF WHEEL BEARING DAMAGE, OBSERVE CURRENT TIPS DOCUMENT
  • 40
    ELASTOMER-MOLDED SEAL
  • 50
    NUT FRONT WHEEL HUB TO STEERING KNUCKLE
  • 60
    HEXALOBULAR BOLTM6X25
  • 70
    LOCKING CAP FRONT WHEEL HUB TO STEERING KNUCKLE
  • 80
    ANTI-FRICTION BEARING REPAIR KIT
  • 200
    STRUT RIGHT WITHOUT BEARING, ONLY REPLACEABLE BY PAIRS
  • 200
    STRUT LEFT WITHOUT BEARING, ONLY REPLACEABLE BY PAIRS
  • 210
    RUBBER BUSHING LEFT AND RIGHT, ALSO USE: 2 X A 211 333 06 97 BOOT, OBSERVE WIS OBSERVE WORK INSTRUCTIONS IN WIS WIS NET#AR33.15-P-0160-03T#
  • 210
    HYDROMOUNT STRUT, Replaced By: A2033331014
  • 210
    HYDROMOUNT STRUT, ALSO USE: 2 X A 211 333 06 97 BOOT, OBSERVE WIS
  • 215
    ELASTOMERIC CUP COVER, HYDRO-MOUNT, LEFT AND RIGHT
  • 220
    ADJUSTMENT SCREW FOR ADJUSTING WORK ONLY
  • 220
    HEXAGON HEAD BOLT SUPPORT TO FRAME M14X1.5X120
  • 230
    SPACER DISK TORQUE STRUT TO FRAME-TYPE INT. SUPP.
  • 230
    INDEXING PLATE FOR ADJUSTING WORK ONLY
  • 240
    HEXAGON NUT STEER. KNUCKLE TO TRAN. CON. ARM RIGHT M14X1,5
  • 240
    NUT W FLANGE, BINDING FOR ADJUSTING WORK ONLY
  • 250
    TS ADJUSTMENT SCREW FOR ADJUSTING WORK ONLY
  • 270
    HEXAGON NUT STEER. KNUCKLE TO TRAN. CON. ARM RIGHT M14X1,5
  • 300
    CROSS STRUT LEFT
  • 300
    CROSS STRUT RIGHT, A 15480920080228 L 00843120080331 V 00052320080331 F 15516220080302 R 03405020080527
  • 300
    CROSS MEMBER LEFT, A 15480820080228 L 00843020080331 V 00052220080331 F 15516120080302 R 03404920080527, Replaced By: A2043306711, +001A2043306811
  • 300
    CROSS MEMBER RIGHT, A 15480820080228 F 15516120080302, Replaced By: A2043306811, +001A2043306711
  • 320
    HEXAGON HEAD BOLT SUPPORT TO FRAME M14X1.5X120
  • 320
    ADJUSTMENT SCREW FOR ADJUSTING WORK ONLY
  • 330
    INDEXING PLATE FOR ADJUSTING WORK ONLY
  • 330
    SPACER DISK TORQUE STRUT TO FRAME-TYPE INT. SUPP.
  • 340
    NUT W FLANGE, BINDING FOR ADJUSTING WORK ONLY
  • 340
    HEXAGON NUT STEER. KNUCKLE TO TRAN. CON. ARM RIGHT M14X1,5
  • 350
    TS ADJUSTMENT SCREW FOR ADJUSTING WORK ONLY
  • 370
    HEXAGON NUT STEER. KNUCKLE TO TRAN. CON. ARM RIGHT M14X1,5
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]