1. Главная
  2. Mercedes
  3. CAR
  4. TYP 180a BM 120.010, .011
  5. 120.010
  6. 03 MOVING PARTS
  7. 003 MOVING PARTS

Mercedes A1210300797 -

TYP 180a BM 120.010, .011 120.010
03 MOVING PARTS - 003 MOVING PARTS
  • Поз.
    Артикул
    Описание
  • 1
    CRANKSHAFT WITH COUNTERWEIGHT AND FLYWHEEL
  • 2
    SPACER RING, 5.45-MM THICK FOR VIBRATION DAMPER AT CRANKSHAFT OPTIONAL
  • 4
    CRANKSHAFT GEAR. KURBELWELLENRAD 20 ZAHNE FUR STEUERUNGSANTRIEB AB MOTOR-NR. 00097/52
  • 5
    OIL SLINGER RING ON CRANKSHAFT, FRONT
  • 8
    FLYWHEEL WITH RING GEAR. FLYWHEEL WITH
  • 9
    STARTER RING
  • 10
    EXPANDING SCREW FOR FLYWHEEL AT CRANKSHAFT
  • 13
    COLLAR SCREW
  • 14
    SEALING RING AT CRANKSHAFT, FRONT
  • 15
    PULLEY
  • 17
    LOCKING RING. VERSCHLUSSDECKEL IN DER KURBELWELLE HINTEN FUR GETRIEBE-ANTRIEBSWELLE
  • 20
    SET OF CRANKSHAFT BEARING SHELLS, INNER DIA. 70-MMSTANDARD OPTIONAL GLYCO READY FOR INSTALLATION
  • 21
    CRANKSHAFT BEARING SHELL MAKE GLYCO WITH GROOVE, USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CENTER B
  • 22
    CRANKSHAFT BEARING SHELL WITHOUT GROOVE OPTIONAL AS BOTTOM OF 1ST AND 3RD BEARING
  • 25
    CONNECTING ROD
  • 26
    CONNECTING BUSHING
  • 27
    CONNECTING ROD SCREW FROM ENGINE 5511622
  • 28
    NUT , UP TO ENGINE 920 10/50,20/60 073205 920 12/52,22/62 019059 921 003475 923 10/50,20/60 092627 923 12/52,22/62 015750 UP TO ENGINE 924 10/50,20/60 002127 924 12/52,22/62 000138 926 10/50,20/60 004380 926 12/52,22/62 000145 UP TO ENGINE 927 000685 928 000871 929 000007
  • 29
    CONNECTING ROD BEARING SHELL STANDARD INNER DIA. 52.00 MM READY FOR INSTALLATION OPTIONAL
  • 34
    PISTON WITH PIN AND RINGS, CYLINDER DIA. 85.00-MMSTANDARD
  • 35
    COMPRESSION RING FOR GROOVE I
  • 36
    TAPERED COMPRESSION. MINUTENRING FUR NUTE II
  • 37
    NOVIX STEPPED RING FOR GROOVE III
  • 38
    NOVIX-SLOTTED RING. NOVIX SLOTTED RING GROOVE IV
  • 999
    NOVIX STEPPED RING FOR GROOVE III
  • 999
    NOVIX STEPPED RING FOR GROOVE III
  • 999
    NOVIX STEPPED RING FOR GROOVE III
  • 999
    NOVIX STEPPED RING FOR GROOVE III
  • 999
    NOVIX SLOTTED RING. NOVIX-SCHLITZRING MIT STUTZRING FUR NUTE IV
  • 999
    NOVIX SLOTTED RING. NOVIX-SCHLITZRING MIT STUTZRING FUR NUTE IV
  • 999
    NOVIX SLOTTED RING. NOVIX-SCHLITZRING MIT STUTZRING FUR NUTE IV
  • 999
    NOVIX SLOTTED RING FOR GROOVE IV
  • 999
    COMPRESSION RING GROOVE I
  • 999
    COMPRESSION RING GROOVE I
  • 999
    COMPRESSION RING GROOVE I
  • 999
    COMPRESSION RING GROOVE I
  • 999
    TAPERED COMPRESSION. MINUTENRING FUR NUTE II
  • 999
    TAPERED COMPRESSION. MINUTENRING FUR NUTE II
  • 999
    TAPERED COMPRESSION. MINUTENRING FUR NUTE II
  • 999
    TAPERED COMPRESSION. MINUTENRING FUR NUTE II
  • 999
    PISTON WITH PIN AND RINGS, CYLINDER DIA. 85.25-MMREP. SIZE I
  • 999
    PISTON WITH PIN AND RINGS, CYLINDER DIA. 85.50-MMREP. SIZE II
  • 999
    PISTON WITH PISTON PIN AND PISTON RINGS, CYLINDER DIA. 86.00REPAIR SIZE III MAKE MAHLE OPTIONAL
  • 999
    PISTON WITH PISTON PIN AND PISTON RINGS MAKE MAHLE FOR CYLINDER DIA. 86.50 MM REPAIR SIZE IV. OPTIONAL
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INNER DIA. 69.75-MMREPAIR SIZE I MAKE GLYCO OPTIONAL READY FOR INSTALLATION
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INTERIOR DIA. 69.50-MMREPAIR SIZE II MAKE GLYCO OPTIONAL READY FOR INSTALLATION
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INNER DIA. 69.25-MMREPAIR SIZE III MAKE GLYCO OPTIONAL READY FOR INSTALLATION
  • 999
    SET OF CRANKSHAFT BEARING SHELLS GLYCO INTERIOR DIA. 69.00 MM REPAIR SIZE IV (READY FOR INSTALLATION) OPTIONAL
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INNER DIA. 70-MMSTANDARD OPTIONAL VANDERVELL READY FOR INSTALLATION
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INNER DIA. 69.75-MMREPAIR SIZE I MAKE VANDERVELL OPTIONAL READY FOR INSTALLATION
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INTERIOR DIA. 69.50-MMREPAIR SIZE II MAKE VANDERVELL OPTIONAL READY FOR INSTALLATION
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INNER DIA. 69.25-MMREPAIR SIZE III MAKE VANDERVELL OPTIONAL READY FOR INSTALLATION
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INNER DIA. 69.00-MMREPAIR SIZE IV VANDERVELL READY FOR INSTALLATION
  • 999
    CRANKSHAFT WITH FLYWHEEL, COLLAR SCREW, CRANKSHAFT BEARING AND CONNECTING ROD BEARING SHELLS, MAKE LAUCHERTAL OPTIONAL
  • 999
    CRANKSHAFT WITH FLYWHEEL, COLLAR SCREW, CRANKSHAFT BEARING AND CONNECTION ROD BEARING SHELLS, MAKE GLYCO OPTIONAL
  • 999
    CRANKSHAFT WITH COUNTERWEIGHT AND FLYWHEEL, Replaced By: A1210303501
  • 999
    SPACER RING FOR CRANKSHAFT, OIL SLINGER RING FROM ENGINE 75 11544 IN ADDITION MOUNTED IN 75 11374 TO 75 11423
  • 999
    COUNTERWEIGHT
  • 999
    ADJUSTING NEEDLE FOR ADJUSTING TOP DEAD CENTER
  • 999
    CRANKSHAFT BEARING SHELL GLYCO WITH GROOVE, USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AT UPPER AND LOWER HALF FOR CENTER BEARIN
  • 999
    CRANKSHAFT BEARING SHELL WITHOUT GROOVE OPTIONAL AS BOTTOM OF 1ST AND 3RD BEARING
  • 999
    CRANKSHAFT BEARING SHELL MAKE GLYCO WITH GROOVE, USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CENTER B
  • 999
    CRANKSHAFT BEARING SHELL GLYCO WITHOUT GROOVE, USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING
  • 999
    CRANKSHAFT BEARING SHELL MAKE GLYCO WITH GROOVE, USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CENTER B
  • 999
    CRANKSHAFT BEARING SHELL WITHOUT GROOVE OPTIONAL AS BOTTOM OF 1ST AND 3RD BEARING
  • 999
    CRANKSHAFT BEARING SHELL MAKE GLYCO WITH GROOVE, USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CENTER B
  • 999
    CRANKSHAFT BEARING SHELL WITHOUT GROOVE OPTIONAL AS BOTTOM OF 1ST AND 3RD BEARING
  • 999
    CRANKSHAFT BEARING SHELL MAKE VANDERVELL WITH GROOVE, USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CEN
  • 999
    CRANKSHAFT BEARING SHELL VANDERVELL WITHOUT GROOVE, USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING
  • 999
    CRANKSHAFT BEARING SHELL VANDERVELL WITH GROOVE, USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AT UPPER AND LOWER HALF FOR CENTER B
  • 999
    CRANKSHAFT BEARING SHELL VANDERVELL WITHOUT GROOVE, USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING
  • 999
    CRANKSHAFT BEARING SHELL VANDERVELL WITHOUT GROOVE, USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING
  • 999
    CRANKSHAFT BEARING SHELL WITH GROOVE OPTIONAL AS TOP OF 1ST AND 3RD BEARING ON TOP AND BOTTOM OF MIDDLE BEARING (LAPPED BEARING)
  • 999
    CRANKSHAFT BEARING SHELL VANDERVELL WITHOUT GROOVE, USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING
  • 999
    CRANKSHAFT BEARING SHELL WITH GROOVE OPTIONAL AS TOP OF 1ST AND 3RD BEARING, ON TOP AND BOTTOM OF MIDDLE BEARING (LAPPED BEARING)
  • 999
    CRANKSHAFT BEARING SHELL VANDERVELL WITHOUT GROOVE, USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING
  • 999
    REPLACED BY D 25X18X72 DIN 73121 K
  • 999
    CONNECTING ROD BEARING SHELL LAUCHERTHAL INTERIOR DIA. 52.00 MM STANDARD (READY FOR INSTALLATION) OPTIONAL
  • 999
    CONNECTING ROD BEARING SHELL INTERIOR DIA. 52.00 MM STANDARD (READY FOR INSTALLATION) OPTIONAL, Replaced By: A1210380710
  • 999
    CONNECTING ROD BEARING SHELL HALF, INNER DIA. 51.75-MMREPAIR SIZE I LAUCHERTHAL OPTIONAL
  • 999
    CONNECTING ROD BEARING SHELL HALF, INTERIOR DIA. 51.75-MMREPAIR SIZE I MAKE LAUCHERTHAL OPTIONAL, Replaced By: A1210380810
  • 999
    CONNECTING ROD BEARING SHELL REPAIR SIZE II, INNER DIA. 51.50 MM READY FOR INSTALLATION OPTIONAL WITH 121 038 30 10
  • 999
    CONNECTING ROD BEARING SHELL REPAIR SIZE II, INNER DIA. 51.50 MM READY FOR INSTALLATION OPTIONAL WITH 121 038 30 10, Replaced By: A1210380910
  • 999
    CONNECTING ROD BEARING SHELL LAUCHERTHAL INTERIOR DIA. 51.25 MMREPAIR SIZE III (READY FOR INSTALLATION) OPTIONAL
  • 999
    CONNECTING ROD BEARING SHELL REPAIR SIZE III, INNER DIA. 51.25 MM READY FOR INSTALLATION OPTIONAL, Replaced By: A1210381010
  • 999
    CONNECTING ROD BEARING SHELL HALF, INTERIOR DIA. 51.00-MMREPAIR SIZE IV MAKE LAUCHERTHAL OPTIONAL
  • 999
    CONNECTING ROD BEARING SHELL HALF, INTERIOR DIA. 51.00-MMREPAIR SIZE IV MAKE LAUCHERTHAL OPTIONAL, Replaced By: A1210381110
  • 999
    CONNECTING ROD BEARING SHELL INTERIOR DIA. 52.00 MM STANDARD (READY FOR INSTALLATION) OPTIONAL, Replaced By: A1210382810
  • 999
    CONNECTING ROD BEARING SHELL GLYCO INTERIOR DIA. 51.75 MMREPAIR SIZE I (READY FOR INSTALLATION) OPTIONAL
  • 999
    CONNECTING ROD BEARING SHELL REPAIR SIZE I, INNER DIA. 51.75 MM READY FOR INSTALLATION OPTIONAL, Replaced By: A1210382910
  • 999
    CONNECTING ROD BEARING SHELL HALF, INNER DIA. 51.50-MMREPAIR SIZE II GLYCO OPTIONAL
  • 999
    CONNECTING ROD BEARING SHELL INTERIOR DIA. 51.50 MMREPAIR SIZE II (READY FOR INSTALLATION) OPTIONAL, Replaced By: A1210383010
  • 999
    CONNECTING ROD BEARING SHELL HALF, INTERIOR DIA. 51.25-MMREPAIR SIZE III OPTIONAL
  • 999
    CONNECTING ROD BEARING SHELL HALF, INTERIOR DIA. 51.25-MMREPAIR SIZE III OPTIONAL, Replaced By: A1210383110
  • 999
    CONNECTING ROD BEARING SHELL HALF, INTERIOR DIA. 51.00-MMREPAIR SIZE IV MAKE GLYCO OPTIONAL
  • 999
    CONNECTING ROD BEARING SHELL HALF, INTERIOR DIA. 51.00-MMREPAIR SIZE IV MAKE GLYCO OPTIONAL, Replaced By: A1210383210
  • 999
    CONNECTING ROD BEARING SHELL STANDARD INNER DIA. 52.00 MM READY FOR INSTALLATION OPTIONAL
  • 999
    CONNECTING ROD BEARING SHELL VANDERVELL INTERIOR DIA. 51.75 MMREPAIR SIZE I (READY FOR INSTALLATION) OPTIONAL
  • 999
    CONNECTING ROD BEARING SHELL REPAIR SIZE II, INNER DIA. 51.50 MM READY FOR INSTALLATION OPTIONAL WITH 121 038 30 10
  • 999
    CONNECTING ROD BEARING SHELL REPAIR SIZE III, INNER DIA. 51.25 MM READY FOR INSTALLATION OPTIONAL
  • 999
    CONNECTING ROD BEARING SHELL HALF, INNER DIA. 51.00-MMREPAIR SIZE IV VANDERVELL OPTIONAL
  • 999
    CRANKSHAFT GEAR ON CRANKSHAFT, FRONT, Replaced By: A1800520203
  • 999
    SPACER RING,. AUSGLEICHRING 5,60 MM ST. WAHLWEISE ZWISCHEN KURBELWELLENRAD UND KURBELWELLE
  • 999
    SPACER RING,. AUSGLEICHRING 5,75 MM ST. WAHLWEISE ZWISCHEN KURBELWELLENRAD UND KURBELWELLE
  • 999
    SPACER RING,. SHIM, 5.90 MM THICK OPTIONAL FOR CRANKSHAFT GEAR AT CRANKSHAFT
  • 999
    SPACER RING,. SHIM, 6.05 MM THICK OPTIONAL FOR CRANKSHAFT GEAR AT CRANKSHAFT
  • 999
    CONNECTING BUSHING, OUTER DIA.28.5-MM REPAIRS
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INTERIOR DIA. 70-MMSTANDARD(MAKE LAUCHERTHAL) OPTIONAL READY FOR INSTALLATION
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INTERIOR DIA. 69.75-MMREPAIR SIZE I MAKE LAUCHERTHAL OPTIONAL READY FOR INSTALLATION
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INTERIOR DIA. 69.50-MMREPAIR SIZE II MAKE LAUCHERTHAL OPTIONAL READY FOR INSTALLATION
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INNER DIA. 69.25-MMREPAIR SIZE III MAKE LAUCHERTHAL OPTIONAL READY FOR INSTALLATION
  • 999
    SET OF CRANKSHAFT BEARING SHELLS, INTERIOR DIA. 69.00-MMREPAIR SIZE IV MAKE LAUCHERTHAL OPTIONAL READY FOR INSTALLATION
  • 999
    CRANKSHAFT BEARING SHELL MAKE LAUCHERTHAL WITH GROOVE,USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CEN
  • 999
    CRANKSHAFT BEARING SHELL MAKE LAUCHERTHAL WITHOUT GROOVE, USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, MAKE LAUCHERTHAL WITH GROOVE, USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CE
  • 999
    CRANKSHAFT BEARING SHELL, MAKE LAUCHERTHAL WITHOUT GROOVE, USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, MAKE LAUCHERTHAL WITH GROOVE, USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CE
  • 999
    CRANKSHAFT BEARING SHELL, MAKE LAUCHERTHAL WITHOUT GROOVE, USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, MAKE LAUCHERTHAL WITH GROOVE, USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CE
  • 999
    CRANKSHAFT BEARING SHELL, MAKE LAUCHERTHAL WITHOUT GROOVE, USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING OPTIONAL
  • 999
    CRANKSHAFT BEARING SHELL, MAKE LAUCHERTHAL WITH GROOVE, USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CE
  • 999
    CRANKSHAFT BEARING SHELL, MAKE LAUCHERTHAL WITHOUT GROOVE, USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING OPTIONAL
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]