Поз.
Артикул
Описание
5
SENSOR , Replaced By: A0018201926
5
SENSOR , ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE!A 153290 A 328810 EXCEPT CODE 807 ALSO INSTALLED IN VEHICLE FROM A 328811 WITH CODE 806, Replaced By: A0018201026
5
SENSOR BELT LOCKING RETRACTOR, AIRBAG AND SIDEBAG, IMPOTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER! MAKE SURE THAT ONLY CONTROL UNITS AND SENSORS FROM THE SAME MANIFACTURER,BOSCH OR TEMIC,ARE FITTED DURING REPAIR WORK. COMPO- NENTS FROM 2 DIFFERENT MANUFACTURERS MAY NOT BE MIXED. F 125158 EXCEPT CODE 805 ALSO INSTALLED IN VEHICLE TO F 125157 WITH CODE 806
5
SENSOR BELT LOCKING RETRACTOR, AIRBAG AND SIDEBAG BOSCH, ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE! A 328811 EXCEPT CODE 806 ALSO INSTALLED IN VEHICLE TO A 328810 WITH CODE 807
5
SENSOR DRIVER'S AIR BAG WITH BELT LOCKING RETRACTOR, IMPOTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER! C 013142 J 016700C 289605
10
SCREW , Replaced By: A0009847929
10
SCREWROCKINGER,TYP 59 U150
13
SENSOR SIDEBAG BOSCH, ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE!
13
SENSOR SIDEBAG TEMIC, IMPOTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER! MAKE SURE THAT ONLY CONTROL UNITS AND SENSORS FROM THE SAME MANIFACTURER,BOSCH OR TEMIC,ARE FITTED DURING REPAIR WORK. COMPO- NENTS FROM 2 DIFFERENT MANUFACTURERS MAY NOT BE MIXED.
16
SHEET METAL SCREW
81
CABLE HARNESS SIDEBAG, STATE IDENT NO. WHEN ORDERING
81
CABLE HARNESS CO-DRIVER'S AIR BAG, STATE IDENT NO. WHEN ORDERING
92
PIN BUSHING HOUSING CONTACT SPIRAL PLUG-CONNECTION,A 123447
95
PIN BUSHING HOUSING FRONT DOOR
98
ROUND PIN BUSHING LIGHT SWITCH 2,5 MM
107
PIN BUSHING HOUSING INSTRUMENT CLUSTER
110
CONTACT BUSHINGR 27, 0.75 MM2
119
CONTACT SPRING UNIPOLAR 0.35-1.0 MM2