Поз.
Артикул
Описание
5
CABLE HARNESS BELT LOCKING RETRACTOR,DRIVER'S AND CO-DRIVER'S AIRBAG,F 087501F 113842 AS OF IDENT.NO.:F 113843 INTEGRATED IN TAIL LIGHT CABLE HARNESS,SEE DESIGN GROUP 54,TU 54/540.
5
CABLE HARNESS BELT LOCKING RETRACTOR,DRIVER'S AND CO-DRIVER'S AIRBAG,F 080150 UP TO END OF MODEL YEAR '93
35
PIN BUSHING HOUSING SEAT CONTACTING
36
PIN BUSHING HOUSING CONTACT SPIRAL PLUG-CONNECTION,A 123447
38
ROUND PIN BUSHING LIGHT SWITCH 2,5 MM
41
PLUG HOUSING ELECTRONIC ACCELERATOR CONTROL UNIT PLUG-CONNECTION, ONLY FOR AUSTRALIA CODE 625
44
ROUND PIN BUSHING LIGHT SWITCH
53
PLUG CONTACT CARBON,BIPOLAR
71
PLUG INTERMEDIATE CONNECTOR,STARTING LOCK
74
PLUG PIN0.5-2.0 MM2
77
PLUG SOCKET PRIMER PELLET
80
PLUG BELT FEEDER SEAT-CONTACT
83
CLIP13 MM, Replaced By: A0129884678
86
SENSOR DRIVER'S AIR BAG WITH BELT LOCKING RETRACTOR, IMPOTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER! C 013142 J 016700C 289605
86
SENSOR BELT LOCKING RETRACTOR,DRIVER'S AND CO-DRIVER'S AIRBAG
86
SENSOR ,A 150364 UP TO END MJ 96, Replaced By: A0008209726
86
SENSOR , ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE!A 153290 A 328810 EXCEPT CODE 807 ALSO INSTALLED IN VEHICLE FROM A 328811 WITH CODE 806, Replaced By: A0018201026
86
SENSOR , MAKE SURE THAT ONLY CONTROL UNITS AND SENSORS FROM THE SAME MANIFACTURER,BOSCH OR TEMIC,ARE FITTED DURING REPAIR WORK. COMPO- NENTS FROM 2 DIFFERENT MANUFACTURERS MAY NOT BE MIXED., Replaced By: A0018202126
86
SENSOR , Replaced By: A0018201926
86
SENSOR , Replaced By: A0008206926
86
SENSOR BELT LOCKING RETRACTOR, AIRBAG AND SIDEBAG, IMPOTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER! MAKE SURE THAT ONLY CONTROL UNITS AND SENSORS FROM THE SAME MANIFACTURER,BOSCH OR TEMIC,ARE FITTED DURING REPAIR WORK. COMPO- NENTS FROM 2 DIFFERENT MANUFACTURERS MAY NOT BE MIXED. F 125158 EXCEPT CODE 805 ALSO INSTALLED IN VEHICLE TO F 125157 WITH CODE 806
86
SENSOR BELT LOCKING RETRACTOR,DRIVER'S AND CO-DRIVER'S AIRBAG, C 013142 J 016700
89
SCREW , Replaced By: A0009842029
89
SCREW , Replaced By: A0009847929
89
SCREW SENSOR TO BRACKET
98
SENSOR SIDEBAG TEMIC, IMPOTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER! MAKE SURE THAT ONLY CONTROL UNITS AND SENSORS FROM THE SAME MANIFACTURER,BOSCH OR TEMIC,ARE FITTED DURING REPAIR WORK. COMPO- NENTS FROM 2 DIFFERENT MANUFACTURERS MAY NOT BE MIXED.
101
SHEET METAL SCREW BRACKET TO CAB 4,2X13
101
SHEET METAL SCREW BRACKET TO FLOOR PLATE, Replaced By: N000000000460
101
SHEET METAL SCREW BRACKET TO FLOOR PLATE