1. Главная
  2. Mercedes
  3. AXLE
  4. HL 1/3-4,5
  5. 741.203 PRODUKTION KASSEL
  6. 35 REAR AXLE
  7. 300 DIFFERENTIAL GEAR

Mercedes A6693530215 - Шестерня полуоси

HL 1/3-4,5 741.203 PRODUKTION KASSEL
35 REAR AXLE - 300 DIFFERENTIAL GEAR
  • Поз.
    Артикул
    Описание
  • 5
    DIFFERENTIAL GEAR , EXHAUST STOCK OF OLD PARTS NUMBER FIRST UP TO REAR AXLE M 006118, Replaced By: A3103500823
  • 5
    AXLE INTRODUCTION LESS RING GEAR AND PINION
  • 8
    DIFFERENTIAL SPIDER
  • 11
    DIFFERENTIAL PINION AXLE INSERT
  • 14
    SPHERICAL WASHER
  • 14
    SPHERICAL WASHER1.00 MM
  • 17
    SIDE GEAR AXLE INSERT
  • 17
    SIDE GEAR
  • 17
    SIDE GEAR , EXHAUST STOCK OF OLD PARTS NUMBER FIRST UP TO REAR AXLE M 006118, Replaced By: A3103500040
  • 20
    THRUST WASHER , Replaced By: A6693530162
  • 20
    THRUST WASHER , Replaced By: A6693530362
  • 20
    THRUST WASHER , Replaced By: A6693530562
  • 20
    THRUST WASHER , Replaced By: A6693530762
  • 20
    THRUST WASHER , Replaced By: A6693530962
  • 20
    THRUST WASHER , Replaced By: A6693531162
  • 20
    THRUST WASHER AS REQUIRED 1.60 MM
  • 20
    THRUST WASHER1.95 MM, UP TO REAR AXLE 154947, FROM REAR AXLE,SEE UNIT MICROFICHE 816,MODEL 743.4
  • 20
    THRUST WASHER1,95 MM
  • 20
    THRUST WASHER SIDE GEAR, FIRST EXHAUST STOCK OF OLD PARTS UP TO REAR AXLE P 055768
  • 20
    THRUST WASHER AS REQUIRED 1.50 MM
  • 20
    THRUST WASHER DIFFERENTIAL GEAR,AS REQUIRED 2.15 MM, WITH 5.6-TON TOTAL WEIGHT UP TO IDENT NO. 013361
  • 20
    THRUST WASHER AS REQUIRED 1.80 MM
  • 20
    THRUST WASHER , Replaced By: A3143530962
  • 20
    THRUST WASHER AS REQUIRED 1.40 MM
  • 20
    THRUST WASHER AS REQUIRED 1.70 MM
  • 23
    SCREW
  • 23
    SCREW COVER TO DIFFERENTIAL CASE,5526084
  • 26
    REPAIR KIT , Replaced By: A3103500040
  • 26
    DIFFERENTIAL PINION , Replaced By: A3093500040
  • 26
    REPAIR KIT DIFFERENTIAL GEAR
  • 26
    REPAIR KIT DIFFERENTIAL GEAR
  • 29
    RING GEAR AND PINION RATIO: 10:41
  • 32
    TAPERED ROLLER BEARING
  • 32
    TAPERED ROLLER BEARING
  • 32
    TAPERED ROLLER BEARING
  • 32
    TAPERED ROLLER BEARING DRIVE SHAFT
  • 32
    TAPERED ROLLER BEARING OUTSIDE
  • 32
    TAPERED ROLLER BEARING DRIVE SHAFT
  • 32
    TAPERED ROLLER BEARING OUTSIDE
  • 35
    SCREW COLLAR
  • 35
    SCREW COLLAR DIFFERENTIAL GEAR ADJUSTMENT
  • 38
    LOCK SCREW COLLAR
  • 38
    LOCK , UP TO REAR AXLE 154947, FROM REAR AXLE,SEE UNIT MICROFICHE 816,MODEL 743.4
  • 38
    LOCK DIFFERENTIAL GEAR ADJUSTMENT
  • 41
    SCREW , Replaced By: N304017008039
  • 41
    SCREW PROTECTIVE PLATE TO EXHAUST PIPE
  • 44
    TOOTHED WASHER LEVER TO AIR SPRING VALVE,K 186867
  • 47
    SCREW
  • 47
    SCREW , Replaced By: A6709900501
  • 50
    LOCK
  • 62
    SPACER RING AS REQUIRED 12.00 MM,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 62
    SPACER RING AS REQUIRED 12.60 MM,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 62
    SPACER RING
  • 65
    TAPERED ROLLER BEARING
  • 65
    TAPERED ROLLER BEARING DRIVE PINION BEARING
  • 65
    TAPERED ROLLER BEARING DRIVE PINION,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 65
    TAPERED ROLLER BEARING DRIVE PINION,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 65
    TAPERED ROLLER BEARING DRIVE PINION,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 68
    SPACER WASHER0.20 MM
  • 68
    SPACER WASHER AS REQUIRED 0.30 MM
  • 68
    SPACER WASHER AS REQUIRED 0.45 MM
  • 68
    SPACER WASHER AS REQUIRED 0.50 MM
  • 68
    SPACER WASHER AS REQUIRED 1.00 MM
  • 68
    SPACER WASHER0.50 MM
  • 68
    SPACER WASHER0.10 MM
  • 68
    SPACER WASHER AS REQUIRED 0.10 MM
  • 68
    SPACER WASHER , Replaced By: A3143536652
  • 68
    SPACER WASHER AS REQUIRED 0.25 MM
  • 71
    CYLINDR. ROLLER BEARING , 309.370-391 UP TO CHASSIS 012168,309.4 UP TO CHASSIS 085135
  • 71
    CYLINDR. ROLLER BEARING PINION,INSIDE
  • 71
    CYLINDR. ROLLER BEARING PINION,INSIDE
  • 71
    CYLINDR. ROLLER BEARING , 309.370-391 UP TO CHASSIS 012168,309.4 UP TO CHASSIS 085135
  • 71
    CYLINDR. ROLLER BEARING PINION,INSIDE
  • 77
    LOCK RING BEARING BRACKET,4 972621
  • 80
    SPACER RING AS REQUIRED 7.70 MM,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.60 MM, WITH 5.6-TON TOTAL WEIGHT FROM IDENT NO. 013362
  • 80
    SPACER RING AS REQUIRED 7.95 MM,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, IN REQUIRED 9.06 MM
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.88 MM
  • 80
    SPACER RING9.24 MM
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.76 MM, WITH 5.6-TON TOTAL WEIGHT FROM IDENT NO. 013362
  • 80
    SPACER RING AS REQUIRED 7.90 MM,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 80
    SPACER RING9.28 MM
  • 80
    SPACER RING9.36 MM
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, IN REQUIRED 7.44 MM, FIRST EXHAUST STOCK OF OLD PARTS UP TO CHASSIS 094397 EXCEPT FOR,SEE FOOTNOTE 5,ON TRUCKS,UP TO CHASSIS 013947 ON BUSES 309.000-049 UP TO CHASSIS 001447,309.100-149 UP TO CHASSIS 019705,309.070-091 UP TO CHASSIS 000202,309.170-191 UP TO CHASSIS 0 01094 309.000-049 FROM CHASSIS 001448,309.100-149 FROM CHASSIS 019706,309.070-091 FROM CHASSIS 000203,309.170-191 FROM CHASSIS 00109 5,309.370-391,400-499 FROM CHASSIS 000001
  • 80
    SPACER RING9.16 MM
  • 80
    SPACER RING AS REQUIRED 7.40 MM
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.52 MM, WITH 5.6-TON TOTAL WEIGHT FROM IDENT NO. 013362
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, IN REQUIRED 9.42 MM
  • 80
    SPACER RING AS REQUIRED 7.75 MM,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, IN REQUIRED 9.38 MM
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, IN REQUIRED 7.82 MM, FIRST EXHAUST STOCK OF OLD PARTS UP TO CHASSIS 094397 EXCEPT FOR,SEE FOOTNOTE 5,ON TRUCKS,UP TO CHASSIS 013947 ON BUSES 309.000-049 UP TO CHASSIS 001447,309.100-149 UP TO CHASSIS 019705,309.070-091 UP TO CHASSIS 000202,309.170-191 UP TO CHASSIS 0 01094 309.000-049 FROM CHASSIS 001448,309.100-149 FROM CHASSIS 019706,309.070-091 FROM CHASSIS 000203,309.170-191 FROM CHASSIS 00109 5,309.370-391,400-499 FROM CHASSIS 000001
  • 80
    SPACER RING9.52 MM
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, IN REQUIRED 9.02 MM
  • 80
    SPACER RING9.40 MM
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, IN REQUIRED 7.48 MM, FIRST EXHAUST STOCK OF OLD PARTS UP TO CHASSIS 094397 EXCEPT FOR,SEE FOOTNOTE 5,ON TRUCKS,UP TO CHASSIS 013947 ON BUSES 309.000-049 UP TO CHASSIS 001447,309.100-149 UP TO CHASSIS 019705,309.070-091 UP TO CHASSIS 000202,309.170-191 UP TO CHASSIS 0 01094 309.000-049 FROM CHASSIS 001448,309.100-149 FROM CHASSIS 019706,309.070-091 FROM CHASSIS 000203,309.170-191 FROM CHASSIS 00109 5,309.370-391,400-499 FROM CHASSIS 000001
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, IN REQUIRED 7.92 MM, FIRST EXHAUST STOCK OF OLD PARTS UP TO CHASSIS 094397 EXCEPT FOR,SEE FOOTNOTE 5,ON TRUCKS,UP TO CHASSIS 013947 ON BUSES 309.000-049 UP TO CHASSIS 001447,309.100-149 UP TO CHASSIS 019705,309.070-091 UP TO CHASSIS 000202,309.170-191 UP TO CHASSIS 0 01094 309.000-049 FROM CHASSIS 001448,309.100-149 FROM CHASSIS 019706,309.070-091 FROM CHASSIS 000203,309.170-191 FROM CHASSIS 00109 5,309.370-391,400-499 FROM CHASSIS 000001
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 9.18 MM
  • 80
    SPACER RING9.54 MM
  • 80
    SPACER RING AS REQUIRED 7.98 MM
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, IN REQUIRED 9.10 MM
  • 80
    SPACER RING9.12 MM
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 9.46 MM
  • 80
    SPACER RING9.04 MM
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.46 MM
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.86 MM
  • 80
    SPACER RING AS REQUIRED 7.50 MM,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 8.00 MM
  • 80
    SPACER RING9.22 MM
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, IN REQUIRED 9.30 MM
  • 80
    SPACER RING9.08 MM
  • 80
    SPACER RING8.96 MM
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.42 MM
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 8.98 MM
  • 80
    SPACER RING9.00 MM
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.68 MM, WITH 5.6-TON TOTAL WEIGHT FROM IDENT NO. 013362
  • 80
    SPACER RING9.44 MM
  • 80
    SPACER RING9.48 MM
  • 80
    SPACER RING AS REQUIRED 7.55 MM,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, IN REQUIRED 9.26 MM
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.84 MM
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, IN REQUIRED 9.14 MM
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.58 MM, WITH 5.6-TON TOTAL WEIGHT FROM IDENT NO. 013362
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.64 MM, WITH 5.6-TON TOTAL WEIGHT FROM IDENT NO. 013362
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.80 MM, WITH 5.6-TON TOTAL WEIGHT FROM IDENT NO. 013362
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.96 MM
  • 80
    SPACER RING AS REQUIRED 7.56 MM
  • 80
    SPACER RING9.32 MM
  • 80
    SPACER RING AS REQUIRED 7.78 MM
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.66 MM
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, IN REQUIRED 9.34 MM
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.72 MM, WITH 5.6-TON TOTAL WEIGHT FROM IDENT NO. 013362
  • 80
    SPACER RING9.50 MM
  • 80
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.62 MM
  • 80
    SPACER RING9.56 MM
  • 80
    SPACER RING9.20 MM
  • 83
    SPACER RING AS REQUIRED 10.00 MM
  • 83
    SPACER RING
  • 86
    SEAL RING FLANGE TO DRIVE PINION
  • 86
    SEAL RING , Replaced By: A0129973047
  • 86
    SEAL RING FLANGE TO DRIVE PINION
  • 89
    SCREW COLLAR DRIVE PINION
  • 89
    SCREW COLLAR
  • 92
    LOCK
  • 95
    SCREW , Replaced By: N304017008039
  • 95
    SCREW PROTECTIVE PLATE TO EXHAUST PIPE
  • 98
    TOOTHED WASHER LEVER TO AIR SPRING VALVE,K 186867
  • 101
    FLANGE
  • 101
    FLANGE
  • 107
    NUT FLANGE TO DRIVE PINION
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]