1. Главная
  2. Mercedes
  3. ENGINE
  4. OM 401
  5. 401.906 EURO 0 (OM 401)
  6. 01 ENGINE HOUSING
  7. 015 CYLINDER CRANKCASE,COVER,GASKET KIT IL. 1

Mercedes A1079910041 - Штифт

OM 401 401.906 EURO 0 (OM 401)
01 ENGINE HOUSING - 015 CYLINDER CRANKCASE,COVER,GASKET KIT IL. 1
  • Поз.
    Артикул
    Описание
  • 5
    CRANKCASE
  • 5
    CRANKCASE ,130555 FOR USE W/AUTOMATIC TRANSMISSION OR W/VOITH RETARDER,DELIVER ADDITIONALLY: 403 200 53 01,IN PLACE OF 403 200 51 01,WATER PUMP, Replaced By: A4010103608, +001A4031803938, +001A4031840280, +001A4032005101, +001A4422010080, +001A4019905001, +006A4229900201, +018A4229900301, +012A4229900401, +012A1079910041
  • 5
    CRANKCASE ,130556 EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO ENGINE 169145, Replaced By: A4010103808
  • 5
    CRANKCASE
  • 5
    CRANKCASE ,259616 CYLINDER LINER O.D.,143 MM, Replaced By: A4210100108, +006A4030113410, +006A4420110059, +006A0159979048, +012A0159979148
  • 5
    CRANKCASE , Replaced By: A4410100208
  • 11
    DOWEL PIN , Replaced By: A5419910062
  • 11
    DOWEL PIN CRANKSHAFT BEARING CAP
  • 13
    CYLINDRICAL PIN
  • 14
    SCREW , ONLY REPLACEABLE BY PAIRS, Replaced By: A4220110071
  • 14
    SCREW CRANKSHAFT BEARING CAP TO CYLINDER CRANKCASE M 18X2X153/35 MM
  • 14
    SCREW , TO BE ADAPTED DURING ASSEMBLY
  • 15
    SCREW BRACKET TO BUMPER STRUT
  • 17
    CAMSHAFT BEARING STANDARD 70 MM
  • 18
    CAMSHAFT BEARING WITH COLLAR 70 MM
  • 19
    PLUG , Replaced By: A0000110021
  • 19
    COVER
  • 19
    COVER CAMSHAFT BORE
  • 21
    NUT AIR RESERVOIR,CONNECTION "14"
  • 22
    SEAL RING LINE CONNECTION
  • 23
    SCREW PLUG ,819969
  • 24
    FITTING FROM INTAKE MANIFOLD TO VACUUM LINE, FROM IDENT NO.002799-360785
  • 25
    SEAL RINGTO 000 553 03 05,000 553 18 05,
  • 26
    SCREW PLUG BELL HOUSING
  • 27
    SEAL RING VALVE TO VALVE,K 025179
  • 28
    SCREW PLUG OIL COOLER,5 360280
  • 30
    SEAL RING AIR COMPRESSOR,CONNECTION: "10"
  • 31
    SCREW PLUG
  • 32
    SEAL RING OIL LINE TO OIL COOLER
  • 33
    CYLINDRICAL PIN FRONT COVER FIXING 8X24
  • 34
    CYLINDRICAL PIN TIMING CASE FIXING 16X24
  • 35
    CAP TO PLUG CORE HOLES 34.2
  • 35
    EXPANSION PLUG48.3 MM
  • 35
    EXPANSION PLUG
  • 35
    EXPANSION PLUG TO PLUG CORE HOLES 34.2, Replaced By: N000000004057
  • 35
    EXPANSION PLUG47.3 MM
  • 35
    EXPANSION PLUG CORE HOLE 40.30 MM
  • 35
    EXPANSION PLUG WATER PASSAGE 36.2 MM
  • 38
    SCREW PLUG
  • 38
    SCREW PLUG LOAD/NO-LOAD VALVE,CONNECTION: "21"
  • 38
    SCREW PLUG , Replaced By: N000908022011
  • 39
    SEAL RING LINE CONNECTION
  • 39
    SEALING RING. SEAL RING DELIVERY LINE TO STEERING
  • 44
    CLAMPING PIN CYLINDER HEAD FIXING
  • 44
    CLAMPING PIN ,129760
  • 46
    BALL TO PLUG OIL CONNECTION TO AIR COMPRESSOR,129760
  • 46
    BALL TO PLUG OIL CONNECTION TO AIR COMPRESSOR
  • 48
    PIPE OIL SEPARATING PIPE
  • 50
    SCREW PLUG OIL COOLER,5 360280
  • 52
    SEAL RING AIR COMPRESSOR,CONNECTION: "10"
  • 54
    SCREW PLUG FUEL TANK
  • 54
    SCREW PLUG , Replaced By: N007604014110
  • 56
    SEAL RINGTO 000 553 03 05,000 553 18 05,
  • 58
    SCREW PLUG
  • 59
    SEAL RING OIL LINE TO OIL COOLER
  • 60
    INTERMEDIATE PIECE
  • 60
    INTERMEDIATE PIECE OIL PRESSURE GAUGE TO CYLINDER CRANKCASE
  • 60
    INTERMEDIATE PIECE OIL PRESSURE SENDER UNIT CONNECTION
  • 61
    OIL DRIP PAN , Replaced By: A0000183835, +001A0009975348
  • 61
    OIL SEPARATOR OIL SEPARATOR
  • 63
    SEAL RING
  • 66
    HOSE MOLDED HOSE,064694
  • 66
    HOSE MOLDED HOSE,064695
  • 66
    HOSE MOLDED HOSE,064694
  • 70
    CLAMP25-40X13 MM
  • 70
    LOOM TIE , Replaced By: N000000000668
  • 70
    CLAMP , Replaced By: A0069970490
  • 87
    SENDER UNIT OIL PRESSURE GAUGE
  • 87
    SENDER UNIT OIL PRESSURE GAUGE
  • 87
    SENDER UNIT OIL PRESSURE GAUGE
  • 88
    SEAL RINGTO 000 553 03 05,000 553 18 05,
  • 89
    HEXAGON HEAD BOLT BRACKET TO TRANSMISSION
  • 89
    SCREW PLUG FUEL TANK
  • 89
    SCREW PLUG , Replaced By: N007604014110
  • 90
    SEAL RING , Replaced By: N007603010110
  • 90
    SEAL RING PNEUMATIC VALVE
  • 90
    SEAL RINGTO 000 553 03 05,000 553 18 05,
  • 91
    COVER , Replaced By: A4570111107
  • 91
    COVER ,050993, Replaced By: A4030100714, +001A4030310232
  • 91
    COVER , Replaced By: A4030100914
  • 91
    COVER , Replaced By: A4030110107
  • 92
    SEAL RING CRANKSHAFT SEALING,FRONT, RECOMMENDED FOR TAKING ON STOCK USE THIS SEALING RING FOR NORMAL REPAIR, Replaced By: A0159974746
  • 92
    SEAL RING , Replaced By: A0259973947
  • 92
    RADIAL SHAFT SEALING RING CRANKSHAFT SEALING,FRONT, USE THIS SEALING RING FOR NORMAL REPAIR RECOMMENDED FOR TAKING ON STOCK
  • 92
    SEAL RING CRANKSHAFT SEALING,FRONT,708527 ONLY USE FOR HEAVY GROOVES AND SCORE MARKS AND HEAVY GROOVES ONCRANKSHAFT JOURNAL. INSTALL SEALING RING TOGETHER WITH RACE A 442 031 00 27 I.D., 105MM
  • 93
    OIL NOZZLE ,121800129760
  • 93
    OIL NOZZLE , Replaced By: A4221800043
  • 93
    OIL NOZZLE ,129661785829, Replaced By: A4421800543, +001N915036010103
  • 93
    OIL NOZZLE ,121799
  • 93
    OIL NOZZLE ,785830
  • 94
    SEAL RING
  • 95
    GASKET , Replaced By: A4420110080
  • 95
    GASKET , Replaced By: A5410110080
  • 95
    GASKET COVER TO CYLINDER CRANKCASE,FRONT
  • 96
    SPRING WASHER PROTECTIVE PLATE TO EXHAUST MUFFLER
  • 96
    SPRING WASHER , Replaced By: N000137008212
  • 97
    SCREW , Replaced By: N304017008034
  • 97
    SCREW BRACKET TO EXHAUST PIPE BRACKET
  • 98
    HOLLOW SCREW HAND PUMP,K 169122
  • 98
    SCREW OIL SPRAY NOZZLE TO CYLINDER CRANKCASE
  • 284
    GASKET KIT CYLINDER CRANKCASE, FOR BREAK-DOWN OF OF GASKET KIT, SEE END OF GROUP 01, ORDER ADDITIONALLY:"DIRKO-TRANSPARENT" TUBE OF SEALING MATERIAL FOR OF CYLINDER LINEROIL COOLER GASKET ON CYLINDER CRANKCASE,UP TO ENGINE 129660WATER PUMP GASKET ON CYLINDER CRANKCASE,UP TO ENGINE 129660 SEALING MATERIAL FOR CYLINDER LINER OF AIR COMPRESSOR
  • 999
    SEAL RING
  • 999
    SEAL RING CRANKSHAFT SEALING,REAR,708527 I.D., 120MM
  • 999
    SEAL RING , Replaced By: A0139971447
  • 999
    SEAL RING , Replaced By: A0249972848
  • 999
    SEAL RING AT WATER PUMP
  • 999
    CYLINDER HEAD COVER ,013687, Replaced By: A4030160505, +001A4420160121
  • 999
    INTERMEDIATE RING
  • 999
    GASKET EXHAUST MANIFOLD TO CYLINDER HEAD
  • 999
    SCREW , EXHAUST STOCK OF OLD PARTS ON ASPIRATING ENGINES FROM ENGINE 129661 - 260051 REPLACE THE OLD PARTS FOR THE NEW ONES ON EVERY CYLINDER BY THE SET ONLY, Replaced By: A4229900201
  • 999
    SCREW , EXHAUST STOCK OF OLD PARTS ON ASPIRATING ENGINES FROM ENGINE 129761-260051 REPLACE THE OLD PARTS FOR THE NEW ONES ON EVERY CYLINDER BY THE SET ONLY, Replaced By: A4229900301
  • 999
    SCREW , EXHAUST STOCK OF OLD PARTS ON ASPIRATING ENGINES FROM ENGINE 129761-260051 REPLACE THE OLD PARTS FOR THE NEW ONES ON EVERY CYLINDER BY THE SET ONLY, Replaced By: A4229900401
  • 999
    EXPANSION PLUG
  • 999
    GASKET KIT , Replaced By: A4210100408
  • 999
    SEAL RING TO LOCK DELIVERY BEGINNING INSPECTION HOLE TO 423 010 02 17, 38
  • 999
    GASKET KIT TIMING CASE TO CYLINDER CRANKCASE
  • 999
    GASKET , Replaced By: A4410140422
  • 999
    GASKET OIL PAN TO CYLINDER CRANKCASE
  • 999
    GASKET , Replaced By: A5410110080
  • 999
    SEAL RING COVER TO TIMING CASE
  • 999
    CYLINDER HEAD GASKET , Replaced By: A4420160420
  • 999
    CYLINDER HEAD GASKET , Replaced By: A4420160320
  • 999
    CYLINDER HEAD GASKET , Replaced By: A4420160520
  • 999
    CYLINDER HEAD GASKET , ALSO APPLICABLE IN CASE OF SUPPORTING SURFACE REWORKED
  • 999
    CYLINDER HEAD GASKET , ALSO APPLICABLE IN CASE OF SUPPORTING SURFACE REWORKED
  • 999
    GASKET CYLINDER HEAD COVER
  • 999
    GASKET CYLINDER HEAD COVER TO CYLINDER HEAD
  • 999
    RACE ,708527 REPAIR SOLUTION
  • 999
    SEAL RING INJECTION PUMP LUBRICATION,473001
  • 999
    GASKET , Replaced By: A4421312080
  • 999
    GASKET , THE OLD PART MUST NO LONGER BE INSTALLED, Replaced By: A4421312080
  • 999
    GASKET TO PLUG AIR COMPRESSOR CONNECTION ON CYLINDER CRANKCASE
  • 999
    GASKET OIL FILTER TO CYLINDER CRANKCASE
  • 999
    GASKET OIL FILTER TO CYLINDER CRANKCASE
  • 999
    GASKET INTAKE MANIFOLD TO CYLINDER HEAD
  • 999
    GASKET OIL FILTER HEAD & OIL COOLER COVER WITH OIL COOLER TO CRANKCASE
  • 999
    GASKET WATER PUMP
  • 999
    GASKET WATER PUMP
  • 999
    SEAL RING , Replaced By: N007603010110
  • 999
    SEAL RING FUEL LINE TO FEED PUMP
  • 999
    SEAL RING POWER STEERING PUMP
  • 999
    SEAL RING OIL COOLER CONNECTION
  • 999
    SCREW PLUG , Replaced By: A4229970230
  • 999
    HOLLOW SCREW , Replaced By: N915036010109
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]