1. Главная
  2. Mercedes
  3. ENGINE
  4. OM 314
  5. 314.961
  6. 05 TIMING
  7. 001 TIMING

Mercedes A3220530125 - ТАРЕЛКА ПРУЖИНЫ

OM 314 314.961
05 TIMING - 001 TIMING
  • Поз.
    Артикул
    Описание
  • 1
    CAMSHAFT WITH CAMSHAFT MOUNTED INJECTION TIMING DEVICE,LIFTING PIN WIDTH, 28 MM, FROM ENGINE 283202-999999 YEAR OF MANUFACTURE 1978-1990 FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 1
    CAMSHAFT WITH INJECTION PUMP MOUNTED INJECTION TIMING DEVICE,LIFTING PIN WIDTH: 28 MM, IN THE CASE OF CAMSHAFT-DRIVEN AIR COMPRESSOR,ALSO ORDER: 352 130 04 16 CONNECTING ROD,352 131 25 33 PARTS KITBEARING SHELLS UP TO ENGINE 283201 YEAR OF MANUFACTURE 1978
  • 5
    THRUST WASHER ,104742, 340.919/002-007/010-014 INAPPLICABLE TO ENGINES WITH CAMSHAFT DRIVEN INJECTION TIMING DEVICE
  • 5
    THRUST WASHER CAMSHAFT FIXING, 340.930 FROM ENGINE 085456 ONLY APPLICABLE TO ENGINES WITH CAMSHAFT DRIVEN INJECTION TIMING DEVICE
  • 7
    LOCK WASHER CLAMP TO BRACKET AND TO PIPE
  • 9
    SCREW COVER PLATE TO COVER PLATE
  • 9
    SCREW THRUST WASHER TO CRANKCASE, UP TO ENGINE 283201 YEAR OF MANUFACTURE 1978
  • 11
    DRIVE GEAR
  • 13
    SPACER RING ,104742, 340.919/002-007/010-014 INAPPLICABLE TO ENGINES WITH CAMSHAFT DRIVEN INJECTION TIMING DEVICE
  • 15
    WOODRUFF KEY CRANKSHAFT
  • 17
    CAMSHAFT GEAR
  • 19
    SCREW BRACKET TO EXHAUST PIPE BRACKET
  • 19
    SCREW , Replaced By: N304017008024
  • 21
    VALVE TAPPET STANDARD 27.98 MM-27.99 MM
  • 21
    VALVE TAPPET REPAIR SIZE II 28.48 MM-28.49 MM
  • 21
    VALVE TAPPET REPAIR SIZE III 28.73 MM - 28.74 MM
  • 21
    VALVE TAPPET REPAIR SIZE I 28.18 MM-28.19 MM
  • 23
    PUSH ROD
  • 25
    ROCKER ARM WITH BUSHING,LEFT
  • 27
    ROCKER ARM WITH BUSHING,RIGHT
  • 29
    BUSHINGTO 366 050 05 33,04 34
  • 31
    BALL PIN ROCKER ARM
  • 33
    NUT
  • 35
    SPRING LONG,ROCKER ARM SPACING
  • 37
    ROCKER ARM SPINDLE
  • 39
    EXPANSION PLUG LATERAL P.T.O. WITH REVERSE SPEED
  • 41
    ROCKER ARM BRACKET OIL SUPPLY NO.1
  • 43
    ROCKER ARM BRACKETNO.2,5,6
  • 45
    ROCKER ARM BRACKET , Replaced By: A3520550210, +001N000417006001
  • 45
    ROCKER ARM BRACKETNO.3,4
  • 47
    SCREW ROCKER SHAFT TO CYLINDER HEAD
  • 49
    SCREW , Replaced By: A0029903804
  • 51
    HEADLESS SETSCREW PLANET GEAR, UP TO CHASSIS 4 277882 FROM CHASSIS 4 277883 SEE MICROFICHE,MODEL 750.402
  • 52
    HEXAGON HEAD BOLT. SCREW VALVE TO BRACKET
  • 53
    SPRING
  • 55
    SPRING
  • 57
    INTAKE VALVE
  • 57
    INTAKE VALVE , Replaced By: A3520500126
  • 59
    EXHAUST VALVE , Replaced By: A3660500627
  • 59
    EXHAUST VALVE
  • 59
    EXHAUST VALVE ,042963
  • 63
    WASHER VALVE SPRING
  • 63
    WASHER
  • 65
    VALVE SPRING
  • 67
    SPRING RETAINER
  • 69
    VALVE COLLET
  • 69
    VALVE COLLET
  • 69
    VALVE COLLET (VALVE CONE HALF)
  • 71
    SHIM , ONLY FOR REPAIR PURPOSES ON REGROUND CYLINDER HEAD
  • 999
    SCREW
  • 999
    CAMSHAFT ,085524 INAPPLICABLE TO ENGINES WITH CAMSHAFT DRIVEN INJECTION TIMING DEVICE
  • 999
    VALVE SPRING
  • 999
    LOCK , THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE, Replaced By: N000933008177
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]