Поз.
Артикул
Описание
5
ACCELERATION SENSOR RELEASE DEVICE AT B-PILLAR, BOTTOM A53, A54
5
CONTROL UNIT RELEASE DEVICE AT B-PILLAR, BOTTOM, X 16166420050428
10
HEXALOBULAR BOLT PLATE TO FRAME-TYPE INTEGRAL SUPPORT
20
CONTROL UNIT AIRBAG, L 00076920121130 M 00076920121130 A 17126720121206 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE
20
CONTROL UNIT AIRBAG ON TUNNEL SRS, X 18350620091217 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE
20
CONTROL UNIT AIRBAG, L 00076820121130 M 00076820121130 A 17126620121206 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE
20
CONTROL UNIT ON TUNNEL SRS, X 17405020080110 X 17664920090911
20
CONTROL UNIT AIRBAG, PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE
20
CONTROL UNIT AIRBAG, L 00076920121130 M 00076920121130 A 17126720121206 FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. L 00217820130831, Replaced By: A1669001211
25
NUT SPRING-LOADED PUSH ROD
25
HEXAGON NUT ELECTRIC CABLE TO ALTERNATOR TERMINAL B-
30
ACCELERATION SENSOR RELEASE DEVICE AT B-PILLAR, BOTTOM A53, A54
40
HEXALOBULAR BOLT DELIVERY LINE TO PUMP M6X25
90
HEXALOBULAR BOLT STIFFENER TO TUNNEL M6X40, A 00696020110907
100
PRESSURE SENSOR F AIRBAG RIGHT REAR DOOR B48/10
110
HEXALOBULAR BOLT TIME-LAG RELAY M5X12
400
WIRING HARNESS WINDOW AIRBAG
401
WIRING HARNESS RIGHT WINDOW AIRBAG IGNITION SQUIB R12/17,, THEFT-RELEVANT PART
401
REPAIR KIT FRONT RIGHT BELT TENS. 2-PIN,R12/2, CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS.SOLDER CONNECTOR SLEEVES:TOTAL WIRE CROSS-SECTION: A 001 546 99 41GREEN0.7 -2.4 MM2 A 002 546 00 41RED2.0 -4.0 MM2 A 002 546 01 41BLUE 3.5 -8.0 MM2 A 002 546 11 41YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 , Replaced By: A0025402405