1. Главная
  2. Mercedes
  3. ENGINE
  4. OM 407 H
  5. 407.910
  6. 01 ENGINE HOUSING
  7. 015 CYLINDER CRANKCASE,COVER,GASKET KIT IL. 5

Mercedes A4570110071 - Болт

OM 407 H 407.910
01 ENGINE HOUSING - 015 CYLINDER CRANKCASE,COVER,GASKET KIT IL. 5
  • Поз.
    Артикул
    Описание
  • 5
    GASKET KIT CYLINDER CRANKCASE, ORDER ADDITIONALLY:"DIRKO-TRANSPARENT" TUBE OF SEALING MATERIAL FOR OF CYLINDER LINERGASKET,TIMING CASE LOCK,UP TO ENGINE 006051GASKET,EXPANSION PLUS TO CYLINDER CRANKCASE UP TO ENGINE 017497OIL COOLER GASKET ON CYLINDER CRANKCASE,UP TO ENGINE 017497WATER PUMP GASKET ON CYLINDER CRANKCASE,UP TO ENGINE 017497 SEALING MATERIAL FOR OF CYLINDER LINER OF AIR COMPRESSOR
  • 5
    GASKET KIT , Replaced By: A4070100480
  • 5
    GASKET KIT , Replaced By: A4070102308
  • 5
    GASKET KIT , Replaced By: A4075865190, +006A4035865090
  • 5
    GASKET KIT , THE OLD PART MUST NO LONGER BE INSTALLED, Replaced By: A4075865290
  • 5
    GASKET KIT , Replaced By: A4070100080
  • 10
    CRANKCASE , Replaced By: A4070100608
  • 10
    CRANKCASE ,017497 FOR USE W/AUTOMATIC TRANSMISSION OR W/VOITH RETARDER,DELIVER ADDITIONALLY: 403 200 53 01,IN PLACE OF 403 200 51 01,WATER PUMP, Replaced By: A4070101508, +001A4470110007, +001A4470110180, +001A4071801138, +001A4031840280, +001A4032005101, +001A4039900901, +006A4229900201, +018A4229900301, +012A4229900401
  • 10
    CRANKCASE , 28-MM-WIDE OIL PUMP GEAR OM 407,VERTICAL VERSION ORDER ADDITIONALLY: OIL PUMP 403 180 17 01 ORDER ADDITIONALLY: OIL NOZZLE PISTON COOLING HOLLOW SCREW PISTON COOLING SCREW PLUG,SEAL RING,TO LOCK LONGITUDINAL COOLING WATER DUCT TAPHOLE, Replaced By: A4070101908
  • 10
    CRANKCASE , 34-MM-WIDE OIL PUMP GEAR, Replaced By: A4470100508
  • 10
    CRANKCASE ,017498
  • 20
    CYLINDRICAL PIN
  • 20
    DOWEL PIN CRANKSHAFT BEARING CAP
  • 35
    SCREW , TO BE ADAPTED DURING ASSEMBLY
  • 35
    SCREW , ONLY REPLACEABLE BY PAIRS, Replaced By: A4220110071
  • 35
    SCREW CRANKSHAFT BEARING CAP TO CYLINDER CRANKCASE M 18X2X153/35 MM
  • 40
    CAMSHAFT BEARING , Replaced By: A4070511510
  • 40
    CAMSHAFT BEARING , Replaced By: A4470510310
  • 40
    CAMSHAFT BEARINGNO.1,TO 407 010 01 08/06 08/15 08
  • 40
    CAMSHAFT BEARINGNO.1,TO 407 010 19 08,447 010 05 08
  • 45
    CAMSHAFT BEARINGNOS.2-6,TO 407 010 19 08,447 010 05 08
  • 45
    CAMSHAFT BEARINGNOS.2-6,TO 407 010 01 08/06 08/15 08
  • 45
    CAMSHAFT BEARING STANDARD 70.00 MM
  • 45
    CAMSHAFT BEARINGNOS.2-6,TO 407 010 19 08,447 010 05 08, Replaced By: A4270510510
  • 50
    CAMSHAFT BEARING WITH COLLAR 70.00 MM
  • 50
    CAMSHAFT BEARING WITH COLLAR TO 407 010 19 08,447 010 05 08
  • 50
    CAMSHAFT BEARING WITH COLLAR TO 407 010 01 08/06 08/15 08
  • 55
    SCREW PLUG OIL-FILTER/LONGITUDINAL-DUCT CONNECTION BORE
  • 60
    SCREW PLUG OIL COOLER,5 360280
  • 65
    SEAL RING AIR COMPRESSOR,CONNECTION: "10"
  • 70
    SCREW PLUG
  • 70
    SCREW PLUG , Replaced By: A2109970132
  • 75
    SEALING RING. SEAL RING OIL DRAIN
  • 77
    SCREW PLUG
  • 78
    SEAL RING LOAD/NO-LOAD VALVE,CONNECTION: "20"
  • 79
    SCREW PLUG OIL-FILTER/LONGITUDINAL-DUCT CONNECTION BORE
  • 80
    SCREW PLUG , Replaced By: N000908022011
  • 80
    SCREW PLUG LOAD/NO-LOAD VALVE,CONNECTION: "21"
  • 85
    SEAL RING LINE CONNECTION
  • 90
    SCREW PLUG
  • 95
    FITTING FROM INTAKE MANIFOLD TO VACUUM LINE, FROM IDENT NO.002799-360785
  • 100
    EXPANSION PLUG TO LOCK LONGITUDINAL COOLING WATER DUCT 62.1 MM
  • 102
    EXPANSION PLUG TO LOCK LONGITUDINAL COOLING WATER DUCT 50.1 MM
  • 105
    BALL TO PLUG OIL CONNECTION TO AIR COMPRESSOR
  • 106
    BALL TO PLUG AIR COMPRESSORE OIL BORE,FRONT SIDE
  • 108
    SCREW PLUG TO LOCK LONGITUDINAL COOLING WATER DUCT TAPHOLE
  • 109
    SEAL RINGTO 006 997 00 72
  • 110
    CLAMPING PIN ,129760
  • 110
    CLAMPING PIN CYLINDER HEAD FIXING
  • 115
    CYLINDRICAL PIN TIMING CASE FIXING 16X24
  • 120
    CYLINDRICAL PIN FRONT COVER FIXING 8X24
  • 122
    GROOVED PIN INJECTION PUMP GEAR ADJUSTMENT
  • 145
    SEAL RING VALVE TO VALVE,K 025179
  • 150
    INTERMEDIATE PIECE TO PLUG BORE USED FOR OIL PRESSURE GAUGE SENDER UNIT
  • 160
    SEAL RING VALVE TO VALVE,K 025179
  • 165
    SCREW PLUG FUEL TANK
  • 170
    SENDER UNIT COOLING WATER TEMPERATURE GAUGE
  • 170
    SENDER UNIT COOLING WATER TEMPERATURE
  • 175
    SEAL RING FUEL LINE TO FEED PUMP
  • 180
    EXPANSION PLUG SUPPORT TO SIDE MEMBER
  • 185
    GASKET
  • 185
    GASKET TO PLUG BEARING BORES OF INTERMEDIATE GEARS
  • 190
    SCREW BRACKET TO TRANSMISSION
  • 193
    SCREW PLUG FUEL TANK
  • 193
    SCREW PLUG , Replaced By: N007604014110
  • 194
    SEAL RING FUEL LINE TO FEED PUMP
  • 195
    SCREW PLUG RELAY VALVE
  • 197
    SEAL RING LOAD/NO-LOAD VALVE,CONNECTION: "20"
  • 245
    FLANGE COOLING WATER FEED LINE LOCK
  • 250
    GASKET OUTLET TO ENGINE
  • 250
    GASKET , Replaced By: N917003040006
  • 250
    GASKET. SEAL , THE OLD PART MUST NO LONGER BE INSTALLED, Replaced By: A3559970149
  • 252
    SCREW END PIECE TO EXHAUST PIPE M 10X25
  • 261
    OIL NOZZLE PISTON COOLING
  • 263
    HOLLOW SCREW , Replaced By: A4579900163
  • 999
    UNION NUT NOZZLE HOLDERS
  • 999
    UNION NUTTO 345 017 73 21
  • 999
    GASKET , Replaced By: A1020180080
  • 999
    GASKET CONNECTOR, Replaced By: A0002011180
  • 999
    GASKET CONNECTOR, Replaced By: A0002011280
  • 999
    GASKET CONNECTOR
  • 999
    SEAL RING
  • 999
    SEAL RING
  • 999
    SEAL RING OIL NOZZLE TO CYLINDER CRANKCASE
  • 999
    SEAL RING FILTER BOWL TO FILTER HEAD
  • 999
    SEAL RING EXPANSION PLUG TO CYLINDER CRANKCASE
  • 999
    SEAL RING COVER TO AIR COMPRESSOR HOUSING
  • 999
    SEAL RING CRANKSHAFT SEALING,REAR,708527 I.D., 120MM
  • 999
    SEAL RING , Replaced By: A0139971447
  • 999
    SEAL RING CRANKSHAFT SEALING,FRONT,708527 ONLY USE FOR HEAVY GROOVES AND SCORE MARKS AND HEAVY GROOVES ONCRANKSHAFT JOURNAL. INSTALL SEALING RING TOGETHER WITH RACE A 442 031 00 27 I.D., 105MM
  • 999
    SEAL RINGTO 388 476 71 69
  • 999
    SEAL RING , Replaced By: A0249972848
  • 999
    SEAL RING AT WATER PUMP
  • 999
    COVER ,000010
  • 999
    INTERMEDIATE RING
  • 999
    GASKET EXHAUST MANIFOLD TO CYLINDER HEAD
  • 999
    BEARING CAP
  • 999
    BEARING CAP
  • 999
    EXPANSION PLUG TIMING CASE,000010
  • 999
    GASKET TIMING CASE LOCK
  • 999
    GASKET
  • 999
    GASKET , Replaced By: A5410110080
  • 999
    CYLINDER HEAD GASKET , Replaced By: A4420160420
  • 999
    CYLINDER HEAD GASKET , Replaced By: A4420160520
  • 999
    CYLINDER HEAD GASKET , ALSO APPLICABLE IN CASE OF SUPPORTING SURFACE REWORKED
  • 999
    CYLINDER HEAD GASKET , ALSO APPLICABLE IN CASE OF SUPPORTING SURFACE REWORKED
  • 999
    GASKET CYLINDER HEAD COVER
  • 999
    GASKET CYLINDER HEAD COVER TO CYLINDER HEAD
  • 999
    RACE ,708527 REPAIR SOLUTION
  • 999
    GASKET , Replaced By: A4421312080
  • 999
    GASKET TO PLUG AIR COMPRESSOR CONNECTION ON CYLINDER CRANKCASE
  • 999
    GASKET OIL FILTER TO CYLINDER CRANKCASE
  • 999
    GASKET OIL FILTER TO CYLINDER CRANKCASE
  • 999
    GASKET INTAKE MANIFOLD TO CYLINDER HEAD
  • 999
    GASKET INTAKE MANIFOLD TO CYLINDER HEAD
  • 999
    GASKET INTAKE MANIFOLD TO CYLINDER HEAD
  • 999
    GASKET OIL FILTER HEAD & OIL COOLER COVER WITH OIL COOLER TO CRANKCASE
  • 999
    GASKET WATER PUMP
  • 999
    GASKET CONNECTOR, Replaced By: A0002011080
  • 999
    GASKET OIL PAN TO CYLINDER CRANKCASE
  • 999
    GASKET
  • 999
    GASKET OIL PAN TO CYLINDER CRANKCASE
  • 999
    GASKET TIMING CASE TO CYLINDER CRANKCASE
  • 999
    GASKET WATER PUMP
  • 999
    GASKET COVER TO CYLINDER CRANKCASE,FRONT
  • 999
    SEAL RING FROM FUEL TANK TO FUEL TANK
  • 999
    SEAL RINGTO 000 553 03 05,000 553 18 05,
  • 999
    SEALING RING. SEAL RING DELIVERY LINE TO STEERING
  • 999
    SEAL RING POWER STEERING PUMP
  • 999
    SEAL RING OIL DRAIN 30X36 MM
  • 999
    SEAL. GASKET , Replaced By: A3661880880
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]