Поз.
Артикул
Описание
5
EL. CABLE ENGINE CABLE HARNESS,BODY MOUNTED, J 18157119990601809 WIRING HARNESSES VALID UP TO IDENT. NO.:J371868 ONLY THE WIRING HARNESSES AS OF IDENT. NO.: J 371868 ARE SECTION RE-PAIR SOLUTIONS THAT ARE INSTALLED IN ACC. WITH THEIR USE IN ALL VEHICLES. FOR VEHICLES BUILT IN BRAZIL (CODE 839) THE OLD WIR- ING HARNESSES ARE STILL REQUIRED.
5
EL. CABLE ENGINE CABLE HARNESS,BODY MOUNTED, J 18157119990601809 WIRING HARNESSES VALID UP TO IDENT. NO.:J371868 ONLY THE WIRING HARNESSES AS OF IDENT. NO.: J 371868 ARE SECTION RE-PAIR SOLUTIONS THAT ARE INSTALLED IN ACC. WITH THEIR USE IN ALL VEHICLES. FOR VEHICLES BUILT IN BRAZIL (CODE 839) THE OLD WIR- ING HARNESSES ARE STILL REQUIRED.
5
EL. CABLE BASIC WIRING HARNESS FOR INTERIOR AND ENGINE COMPARTMENT BODY SIDE, STATE IDENT NO. WHEN ORDERING WIRING HARNESSES VALID AS OF IDENT. NO.:J371869 ONLY THE WIRING HARNESSES AS OF IDENT. NO.: J 371868 ARE SECTION RE-PAIR SOLUTIONS THAT ARE INSTALLED IN ACC. WITH THEIR USE IN ALL VEHICLES. FOR VEHICLES BUILT IN BRAZIL (CODE 839) THE OLD WIR- ING HARNESSES ARE STILL REQUIRED.
5
EL. CABLE ENGINE CABLE HARNESS,BODY MOUNTED, J 18157119990601809 WIRING HARNESSES VALID UP TO IDENT. NO.:J371868 ONLY THE WIRING HARNESSES AS OF IDENT. NO.: J 371868 ARE SECTION RE-PAIR SOLUTIONS THAT ARE INSTALLED IN ACC. WITH THEIR USE IN ALL VEHICLES. FOR VEHICLES BUILT IN BRAZIL (CODE 839) THE OLD WIR- ING HARNESSES ARE STILL REQUIRED.
5
EL. CABLE ENGINE CABLE HARNESS,BODY MOUNTED, J 18157119990601809 WIRING HARNESSES VALID UP TO IDENT. NO.:J371868 ONLY THE WIRING HARNESSES AS OF IDENT. NO.: J 371868 ARE SECTION RE-PAIR SOLUTIONS THAT ARE INSTALLED IN ACC. WITH THEIR USE IN ALL VEHICLES. FOR VEHICLES BUILT IN BRAZIL (CODE 839) THE OLD WIR- ING HARNESSES ARE STILL REQUIRED.
5
EL. CABLE ENGINE CABLE HARNESS,BODY MOUNTED, J 18157119990601809 NO LONGER AVAILABLE WIRING HARNESSES VALID UP TO IDENT. NO.:J371868 ONLY THE WIRING HARNESSES AS OF IDENT. NO.: J 371868 ARE SECTION RE-PAIR SOLUTIONS THAT ARE INSTALLED IN ACC. WITH THEIR USE IN ALL VEHICLES. FOR VEHICLES BUILT IN BRAZIL (CODE 839) THE OLD WIR- ING HARNESSES ARE STILL REQUIRED.
5
EL. CABLE ENGINE CABLE HARNESS,BODY MOUNTED, J 18157119990601809 NO LONGER AVAILABLE WIRING HARNESSES VALID UP TO IDENT. NO.:J371868 ONLY THE WIRING HARNESSES AS OF IDENT. NO.: J 371868 ARE SECTION RE-PAIR SOLUTIONS THAT ARE INSTALLED IN ACC. WITH THEIR USE IN ALL VEHICLES. FOR VEHICLES BUILT IN BRAZIL (CODE 839) THE OLD WIR- ING HARNESSES ARE STILL REQUIRED.
5
EL. CABLE ENGINE CABLE HARNESS,BODY MOUNTED, J 18157119990601809 NO LONGER AVAILABLE WIRING HARNESSES VALID UP TO IDENT. NO.:J371868 ONLY THE WIRING HARNESSES AS OF IDENT. NO.: J 371868 ARE SECTION RE-PAIR SOLUTIONS THAT ARE INSTALLED IN ACC. WITH THEIR USE IN ALL VEHICLES. FOR VEHICLES BUILT IN BRAZIL (CODE 839) THE OLD WIR- ING HARNESSES ARE STILL REQUIRED.
5
EL. CABLE ENGINE CABLE HARNESS,BODY MOUNTED, J 18157119990601809 NO LONGER AVAILABLE WIRING HARNESSES VALID UP TO IDENT. NO.:J371868 ONLY THE WIRING HARNESSES AS OF IDENT. NO.: J 371868 ARE SECTION RE-PAIR SOLUTIONS THAT ARE INSTALLED IN ACC. WITH THEIR USE IN ALL VEHICLES. FOR VEHICLES BUILT IN BRAZIL (CODE 839) THE OLD WIR- ING HARNESSES ARE STILL REQUIRED.
8
PIN BUSHING HOUSING ELECTRIC CHANGE-OVER VALVE
11
COVERTO 008 545 08 28,008 545 09 28
14
ROUND PIN BUSHING4 MM2
17
PIN BUSHING HOUSING ELECTRIC CHANGE-OVER VALVE
20
COVERTO 008 545 08 28,008 545 09 28
23
ROUND PIN BUSHING WITH DETENT AND WITH CATCH FOR HOUSING 2.5 MM2
23
ROUND PIN BUSHING , Replaced By: A0035452626
26
PIN BUSHING HOUSING OUTBOARD TEMPERATURE FEELER 2-PIN CODE A,B4,126373
35
PIN BUSHING HOUSING. PLUG SOCKET SENSOR TO WHEEL HOUSING,3-POLE
38
BRACKETTO 031 545 06 28, A 290167 EXCEPT CODE 805 ALSO INSTALLED IN VEHICLE TO A 290166 WITH CODE 806
41
PLUG HOUSING. PLUG PLUG CONNECTION FRONT AXLE,LEFT AND RIGHT
44
CLUTCH. PIN BUSHING HOUSING RADAR SENSOR 6 PIN, CODE B,TO A0004460449
47
CLUTCH. PIN BUSHING HOUSING SIREN
56
PIN BUSHING HOUSING OUTBOARD TEMPERATURE FEELER 2-PIN CODE A,B4,126373
59
PIN BUSHING HOUSING. PLUG SOCKET SENSOR TO WHEEL HOUSING,3-POLE
62
CONTACT BUSHING WITH SINGLE-WIRE SEAL 0.5MM2,126373
89
CONTACT SPRING0.5-1.0 MM2
89
CONTACT SPRING1-2.5 MM2
98
PLUG
101
COVERING
110
REP.SET CONTACT0.75 MM2 MQS, CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS.SOLDER CONNECTOR SLEEVES:TOTAL WIRE CROSS-SECTION: A 001 546 99 41GREEN0.7 -2.4 MM2 A 002 546 00 41RED2.0 -4.0 MM2 A 002 546 01 41BLUE 3.5 -8.0 MM2 A 002 546 11 41YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2
113
PIN BUSHING HOUSING FROM CONTROL UNIT TO SEPARATION POINT
116
PIN BUSHING HOUSING FROM CONTROL UNIT TO SEPARATION POINT
119
PLUG HOUSING CONTROL UNIT 5-PIN LKS1.5,N15/7
122
REP.SET CONTACT SEAT MULTIPLE PLUG 2.5 MM2 LKS
125
PLUG HOUSING LIGHTING UNIT 5-PIN
128
PLUG WINDSHIELD WASHER PUMP,2-POLE
131
PIN BUSHING HOUSING THREE PIN JACK CONNECTOR 3 - POLIG
134
PLUG HOUSING CONTROL FOR ELECTRIC SUCTION-TYPE FAN
137
REP.SET CONTACT. CABLE HARNESS
137
CONTACT BUSHING2,5-4,0 MM2
140
LAMP HOLDER. SOCKET ADDITIONAL BLINKER LAMP
140
LAMP SOCKET ADDITIONAL BLINKER LAMP E22/2, Replaced By: A0005400966
143
GASKETTO 000 545 47 19
146
CONTACT BUSHING , Replaced By: A0005400966
146
LAMP HOLDER. SOCKET ADDITIONAL BLINKER LAMP
149
PIN BUSHING HOUSING DOOR SEPARATION POINT,B-PILLAR
152
CONTACT SPRING1-2.5 MM2
155
PLUG HOUSING BRAKE LINING WEAR INDICATOR
158
PLUG HOUSING BUMPER CONNECTOR 6-PIN MQS,X26/27
161
REP.SET CONTACT0.75 MM2 MQS, CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS.SOLDER CONNECTOR SLEEVES:TOTAL WIRE CROSS-SECTION: A 001 546 99 41GREEN0.7 -2.4 MM2 A 002 546 00 41RED2.0 -4.0 MM2 A 002 546 01 41BLUE 3.5 -8.0 MM2 A 002 546 11 41YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2
176
PLUG WARM-UP SENDER,COLD START VALVE,AIRFLOW SENSOR PLATE CONTACT OR AIR SLIDE
179
PIN BUSHING WITH DETENT AND WITH CATCH FOR HOUSING 2.5 MM2
179
PIN BUSHING RADIO SET
182
FLAT PIN BUSHINGTO 002 545 92 26,1.5-2.5 MM 2
182
FLAT PLUG. FLAT PIN BUSHING WITH DETENT 1.5-2.5 MM2
206
CONTACT SPRINGTO 657 540 50 10
209
PIN BUSHING HOUSING HYDRAULIC UNIT ABS, A 290167 EXCEPT CODE 805 ALSO INSTALLED IN VEHICLE TO A 290166 WITH CODE 806
212
CAPTO 029 545 75 28, A 290167 EXCEPT CODE 805 ALSO INSTALLED IN VEHICLE TO A 290166 WITH CODE 806
215
PLUG HOUSING CONTROL UNIT AUTOMATIC CLUTCH SYSTEM (AKS) 15-PIN RK2.5
218
CAPTO 029 545 75 28, A 290167 EXCEPT CODE 805 ALSO INSTALLED IN VEHICLE TO A 290166 WITH CODE 806
221
GASKET. BLIND PLUG
221
CORE BUNDLE SEALING. WIRE SEAL WITHE 1.0-2.5 MM2, PIN 57 - 62
224
REP.SET CONTACT1.0 MM2,N15/4
224
REP.SET CONTACT2.5 MM2, CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS.SOLDER CONNECTOR SLEEVES:TOTAL WIRE CROSS-SECTION: A 001 546 99 41GREEN0.7 -2.4 MM2 A 002 546 00 41RED2.0 -4.0 MM2 A 002 546 01 41BLUE 3.5 -8.0 MM2 A 002 546 11 41YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2
227
CABLE CONNECTOR POWER STEERING
230
NUT LEVER TO THROTTLE VALVE SHAFT TO 366 140 02 32
233
CLIP CABLE HARNESS TO ROOF RAIL
239
BRACKET
240
BRACKET
245
EXPANSION PLUG CAB,FRONT
248
SCREW BEARING BRACKET TO TRANSMISSION