1. Главная
  2. Mercedes
  3. ENGINE
  4. OM 904 LA
  5. 904.938
  6. 01 ENGINE HOUSING
  7. 075 CYLINDER HEAD,VALVES,GASKET KIT IL. 1

Mercedes A9060160226 - ТАРЕЛКА ПРУЖИНЫ

OM 904 LA 904.938
01 ENGINE HOUSING - 075 CYLINDER HEAD,VALVES,GASKET KIT IL. 1
  • Поз.
    Артикул
    Описание
  • 5
    CYLINDER HEAD LESS VALVES
  • 5
    CYLINDER HEAD WITH VALVES AND CONSTANT THROTTLE 36°, ORDER ADDITIONALLY: 2X A 906 990 01 17 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART AFTER EXCHANGING THE CYLINDER HEAD ASSY., CHANGE THE SAA ON THE DATA CARD ACCORDING TO REFERENCE TABLE OF THE SI05.30-N-0004A WIS-NET#SI05.30-N-0004A# UP TO ENGINE 319372 ORDER ADDITIONALLY: 4X A 906 017 05 24
  • 5
    CYLINDER HEAD LESS VALVES
  • 5
    CYLINDER HEAD LESS VALVES,415779
  • 5
    CYLINDER HEAD LESS VALVES
  • 5
    CYLINDER HEAD LESS VALVES
  • 5
    CYLINDER HEAD WITH VALVES AND CONSTANT THROTTLE 45°, UP TO ENGINE 019268 ORDER ADDITIONALLY: 1X A906 203 07 36. 1X A 906 203 01 76, 2X N 910105 010011, 4X A 906 055 07 06 AS OF ENGINE 019269 UP TO ENGINE 039739 ORDER ADDITIONALLY: 4X A 906 055 07 06 ORDER ADDITIONALLY: 2X A 906 990 01 17 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART, Replaced By: A9040103521
  • 5
    CYLINDER HEAD LESS VALVES
  • 5
    CYLINDER HEAD LESS VALVES
  • 5
    CYLINDER HEAD , Replaced By: A9040105820
  • 5
    CYLINDER HEAD , Replaced By: A9040107520
  • 8
    BALL TO PLUG AIR COMPRESSORE OIL BORE,FRONT SIDE
  • 11
    EXPANSION PLUG PLUG FOR WEB COOLING BORE 13MM
  • 11
    EXPANSION PLUG PLUG FOR WEB COOLING BORE 12MM
  • 14
    EXPANSION PLUG
  • 14
    EXPANSION PLUG WATER PASSAGE 36.2 MM
  • 17
    EXPANSION PLUG P.T.O. HOUSING
  • 17
    EXPANSION PLUG FITTING SIZE + 1.0,604909
  • 18
    BALL TO PLUG OIL CONNECTION TO AIR COMPRESSOR
  • 18
    BALL TO PLUG AIR COMPRESSORE OIL BORE,FRONT SIDE
  • 18
    BALL
  • 19
    EXPANSION PLUG WATER PASSAGE
  • 20
    SCREW PLUG
  • 20
    SCREW BRACING TO 926 010 12 20
  • 21
    VALVE SEAT RING EXHAUST,REPAIR SIZE II 40.57 MM
  • 21
    VALVE SEAT RING EXHAUST,STANDARD 40.07 MM 45°, NOTE FOLLOWING WIS DOCUMENT WIS-NET#SI05.30-N-0004A#
  • 21
    VALVE SEAT RING INTAKE,REPAIR SIZE I 35.37 MM
  • 21
    VALVE SEAT RING EXHAUST,STANDARD, THE OLD PART MUST NO LONGER BE INSTALLED IN THIS PLACE, Replaced By: A9060531232
  • 21
    VALVE SEAT RING EXHAUST,REPAIR SIZE II 40.37 MM
  • 21
    VALVE SEAT RING EXHAUST,REPAIR SIZE I 40.37 MM, THE OLD PART MUST NO LONGER BE INSTALLED IN THIS PLACE, Replaced By: A9060531432
  • 21
    VALVE SEAT RING INTAKE,REPAIR SIZE II 35.57 MM
  • 21
    VALVE SEAT RING EXHAUST,REPAIR SIZE I 40.37 MM36°
  • 21
    VALVE SEAT RING EXHAUST,STANDARD 40.07 MM 36°
  • 21
    VALVE SEAT RING EXHAUST,REPAIR SIZE II 40.57 MM36°
  • 21
    VALVE SEAT RING INTAKE,STANDARD
  • 21
    VALVE SEAT RING EXHAUST,REPAIR SIZE II 40.57 MM, THE OLD PART MUST NO LONGER BE INSTALLED IN THIS PLACE, Replaced By: A9060531532
  • 23
    VALVE GUIDE INTAKE AND EXHAUST, FITTING SIZE, + 0,5 MM,*0041955
  • 23
    VALVE GUIDE INTAKE AND EXHAUST, FITTING SIZE, + 0.2 MM,*0041956
  • 23
    VALVE GUIDE INTAKE AND EXHAUST, REPAIR SIZE I 13.20 MM,424660
  • 23
    VALVE GUIDE INTAKE AND EXHAUST, STANDARD, UP TO ENGINE 041995 ORDER ADDITIONALLY: 6X A906 055 07 06
  • 23
    VALVE GUIDE ,*0039740 FIRST EXHAUST STOCK OF OLD PARTS UP TO ENGINE 549667, Replaced By: A9060530230
  • 23
    VALVE GUIDE ,*0039740 FIRST EXHAUST STOCK OF OLD PARTS UP TO ENGINE 549667, Replaced By: A9060530330
  • 23
    VALVE GUIDE INTAKE AND EXHAUST, FITTING SIZE, + 0.5 MM
  • 23
    VALVE GUIDE , FIRST EXHAUST STOCK OF OLD PARTS UP TO ENGINE 549667, Replaced By: A9060530130
  • 23
    VALVE GUIDE INTAKE AND EXHAUST, STANDARD,*0041956
  • 26
    SEAL RING
  • 26
    SEAL RING
  • 29
    SLEEVE PROTECTIVE SLEEVE M12X1,*0197928
  • 29
    SLEEVE PROTECTIVE SLEEVE
  • 32
    EXHAUST VALVE45°, NOTE FOLLOWING WIS DOCUMENT WIS-NET#SI05.30-N-0004A#
  • 32
    EXHAUST VALVE45°, NOTE FOLLOWING WIS DOCUMENT WIS-NET#SI05.30-N-0004A#
  • 32
    INTAKE VALVE
  • 32
    INTAKE VALVE
  • 32
    EXHAUST VALVE36°
  • 32
    INTAKE VALVE ,*0039739
  • 35
    WASHER VALVE SPRING
  • 38
    VALVE SPRING EXHAUST
  • 38
    VALVE SPRING INTAKE
  • 38
    VALVE SPRING OUTLET - ONLY VALID FOR 36 DEGREES
  • 38
    VALVE SPRING OUTLET - ONLY VALID FOR 45 DEGREES, NOTE FOLLOWING WIS DOCUMENT WIS-NET#SI05.30-N-0004A#
  • 38
    VALVE SPRING INTAKE
  • 41
    SPRING RETAINER (VALVE SPRING DISC), Replaced By: A9060530225
  • 41
    SPRING RETAINER (VALVE SPRING DISC)
  • 44
    VALVE COLLET CONSTANT THROTTLE TO CYLINDER HEAD
  • 47
    SEAL HOLDER ,*0039739
  • 47
    SEAL HOLDER. SEAL ,*0039740
  • 47
    SEAL HOLDER. SEAL ,*0039740
  • 47
    SEAL HOLDER ,*0039740, Replaced By: A9060530358
  • 50
    VALVE CAP EXHAUST
  • 53
    COVER
  • 59
    INTERMEDIATE SHAFT , Replaced By: A9060550706
  • 59
    VALVE BRIDGE ,*0039740
  • 59
    VALVE BRIDGE , UP TO ENGINE 041995 ORDER ADDITIONALLY: 6X A906 055 07 06
  • 62
    SET SCREW ,*0008463
  • 65
    NUT
  • 68
    PIN GUIDE,VALVE BRIDGE,*0039739
  • 71
    CYLINDER HEAD GASKET , Replaced By: A9040161120
  • 71
    CYLINDER HEAD GASKET , FIRST EXHAUST STOCK OF OLD PARTS UP TO ENGINE 035006, Replaced By: A9040160620
  • 71
    CYLINDER HEAD GASKET , Replaced By: A9040160720
  • 71
    CYLINDER HEAD GASKET , FIRST EXHAUST STOCK OF OLD PARTS UP TO ENGINE 254604, Replaced By: A9040160920
  • 71
    CYLINDER HEAD GASKET , Replaced By: A9040161020
  • 71
    CYLINDER HEAD GASKET CYLINDER HEAD TO CYLINDER CRANKCASE
  • 74
    SCREW , Replaced By: A9060160769
  • 74
    CYLINDER HEAD BOLT CYLINDER HEAD TO CYLINDER CRANKCASE
  • 83
    VALVE CONSTANT THROTTLE,*028996
  • 86
    GUIDE ,*028996
  • 89
    SPRING ,*028996
  • 92
    SPRING RETAINER
  • 92
    SPRING RETAINER ,*028996, Replaced By: A9060160226
  • 95
    VALVE COLLET ,*028996
  • 98
    PISTON ,*028996
  • 101
    SEAL RINGTO 906 010 01 89
  • 104
    COVER
  • 134
    NOZZLE HOLDER , FIRST EXHAUST STOCK OF OLD PARTS UP TO ENGINE 368258, Replaced By: A0060171421
  • 134
    NOZZLE HOLDER WITH NOZZLE,*0022247
  • 141
    SPRING TO 006 017 84 21
  • 149
    NOZZLE TO 004 017 11 21
  • 151
    UNION NUTTO 006 017 88 21
  • 153
    WASHER , Replaced By: A9060170260
  • 153
    SEAL RING NOZZLE HOLDER TO CYLINDER HEAD, RECOMMENDED FOR TAKING ON STOCK
  • 157
    PIPE SOCKET INJECTION LINE ON NOZZLE HOLDER, Replaced By: A9060170524
  • 157
    PIPE SOCKET , EXHAUST STOCK OF OLD PARTS UP TO ENGINE 019115, Replaced By: A5410170324
  • 159
    SEAL RING INJECTION LINE ON NOZZLE HOLDER
  • 161
    SCREW NOZZLE HOLDERS
  • 161
    SCREW NOZZLE HOLDERS
  • 163
    CLAMPING BRACKET NOZZLE HOLDER TO CYLINDER HEAD
  • 163
    CLAMPING BRACKET NOZZLE HOLDER TO CYLINDER HEAD, NOT USED
  • 165
    CAP BOLT. SCREW OIL COOLER TO COVER
  • 165
    SCREW NOZZLE HOLDER TO CYLINDER HEAD,*0046893
  • 167
    SPHERICAL WASHER NOZZLE HOLDER TO CYLINDER HEAD TO 000912 008003
  • 197
    GASKET KIT CYLINDER HEAD,CYLINDER HEAD COVER, MADE FROM METAL
  • 197
    CYLINDER HEAD CYLINDER HEAD,CYLINDER HEAD COVER, MADE FROM METAL
  • 197
    GASKET KIT
  • 197
    GASKET KIT , Replaced By: A9040107720
  • 197
    GASKET KIT , Replaced By: A9040101721
  • 999
    CYLINDER HEAD GASKET CYLINDER HEAD TO CYLINDER CRANKCASE, Replaced By: A9040161320
  • 999
    LINE CONSTANT THROTTLE
  • 999
    LINE CONSTANT THROTTLE
  • 999
    BALL SCREW PIN
  • 999
    SEAL RING
  • 999
    SEALING RING AT PRESSURE REGULATOR
  • 999
    BANJO BOLT. SCREW CONSTANT THROTTLE
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]