Mercedes A1243505639 - ГЛАВНАЯ ПАРА

15

DIFFERENTIAL GEAR LESS RING GEAR AND PINION, 201.024 USED WITH MANUAL FIVE-SPEED TRANSMISSION FROM IDENT NO. A 456129 , F 539197 ALSO INSTALLED ON: A 411067,A 418669,A 434248,A 437606,A 438142,A 438444,A 441817,A 442074,A 442076,A 444387,A 446081. F 456209,F 465655,F 488676,F 492064,F 497536,F 498653,F 506309,F 523900,F 523920,F 523947,F 537867.

15

DIFFERENTIAL GEAR LESS RING GEAR AND PINION

15

DIFFERENTIAL GEAR LESS RING GEAR AND PINION, 201.023UP TO IDENT NO. A 366433 , F 343121 201.024UP TO IDENT NO. A 456128 , F 539196 EXCEPT FOR A 411067,A 418669,A 434248,A 437606,A 438142,A 438444,A 441817,A 442074,A 442076,A 444387,A 446081. F 456209,F 465655,F 488676,F 492064,F 497536,F 498653,F 506309,F 523900,F 523920,F 523947,F 537867.

20

THRUST WASHER AS REQUIRED 3.2 MM, WITH LINING ON ONE SIDE ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)

20

THRUST WASHER AS REQUIRED 3.4 MM, WITH LINING ON ONE SIDE ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)

20

THRUST WASHER AS REQUIRED 3.5 MM, WITH LINING ON ONE SIDE ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)

20

THRUST WASHER AS REQUIRED 3.3 MM, WITH LINING ON ONE SIDE ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)

20

THRUST WASHER AS REQUIRED 3,8 MM, WITH LINING ON ONE SIDE

20

THRUST WASHER AS REQUIRED 2.9 MM, WITH LINING ON ONE SIDE

20

THRUST WASHER AS REQUIRED 3.1 MM, WITH LINING ON ONE SIDE

20

THRUST WASHER AS REQUIRED 3,0 MM, WITH LINING ON ONE SIDE

20

THRUST WASHER AS REQUIRED 3.6 MM, WITH LINING ON ONE SIDE ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)

20

THRUST WASHER AS REQUIRED 4,0 MM, WITH LINING ON ONE SIDE

20

THRUST WASHER AS REQUIRED 2,8 MM, WITH LINING ON ONE SIDE

20

THRUST WASHER AS REQUIRED 3,7 MM, WITH LINING ON ONE SIDE

25

THRUST WASHER LESS LINING, WITH 5 SHACKLES, ONLY USED WITH AUTOMATIC LIMITED-SLIP DIFFERENTIAL (A S D)

30

THRUST WASHER WITH LINING ON BOTH SIDES

35

THRUST WASHER LESS LINING, W/4 SHACKLES & 2 NOTCHES, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)

40

SIDE GEAR ONLY USED WITH ASD

45

DIFFERENTIAL PINION

50

SPHERICAL WASHER

55

CLAMPING SLEEVE

60

PIN

65

RING GEAR AND PINION1:3,27, 201.023UP TO IDENT NO. A 366433 , F 343121 201.024UP TO IDENT NO. A 456128 , F 539196 EXCEPT FOR A 411067,A 418669,A 434248,A 437606,A 438142,A 438444,A 441817,A 442074,A 442076,A 444387,A 446081. F 456209,F 465655,F 488676,F 492064,F 497536,F 498653,F 506309,F 523900,F 523920,F 523947,F 537867. USE REAR AXLE OIL A 001 989 17 03

65

RING GEAR AND PINION1:3.67, USE REAR AXLE OIL A 001 989 17 03

65

RING GEAR AND PINION , Replaced By: A1243505639

65

RING GEAR AND PINION , Replaced By: A1243502239

65

RING GEAR AND PINION , Replaced By: A1243504939

65

RING GEAR AND PINION , Replaced By: A1243504239

65

RING GEAR AND PINION1:2,87, USE REAR AXLE OIL A 001 989 17 03

70

SCREW , Replaced By: A2029902801

70

SCREW RING GEAR TO DIFFERENTIAL CASE

75

GEAR 26 TEETH FUER 1:3.69

75

GEAR 28 TEETH

80

TAPERED ROLLER BEARING RING GEAR BEARING, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632

85

LOCK AS REQUIRED 4.50 MM

85

LOCK AS REQUIRED 4.1 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632

85

LOCK AS REQUIRED 4.3 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632

85

LOCK AS REQUIRED 4.15 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632

85

LOCK AS REQUIRED 4.2 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632

85

LOCK AS REQUIRED 4.4 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632

85

LOCK AS REQUIRED 3.8 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632

85

LOCK AS REQUIRED 3.6 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632

85

LOCK AS REQUIRED 3.9 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632

85

LOCK AS REQUIRED 3.7 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632

85

LOCK AS REQUIRED 3.85 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632

85

LOCK AS REQUIRED 4.05 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632

85

LOCK AS REQUIRED 3.95 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632

85

LOCK AS REQUIRED 4.0 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632

85

LOCK AS REQUIRED 4.60 MM

90

OIL COLLECTOR

150

SPACER WASHER AS REQUIRED 2.35 MM

150

SPACER WASHER AS REQUIRED 2.05 MM

150

SPACER WASHER AS REQUIRED 2.20 MM

150

SPACER WASHER AS REQUIRED 1.90 MM

150

SPACER WASHER AS REQUIRED 2.40 MM, ONLY USED WITH AUTOMATIC LIMITED-SLIP DIFFERENTIAL (A S D)

150

SPACER WASHER AS REQUIRED 1.95 MM

150

SPACER WASHER AS REQUIRED 2.00 MM

150

SPACER WASHER AS REQUIRED 1.55 MM, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)

150

SPACER WASHER AS REQUIRED 2.30 MM, ONLY USED WITH AUTOMATIC LIMITED-SLIP DIFFERENTIAL (A S D)

150

SPACER WASHER AS REQUIRED 2.10 MM, ONLY USED WITH AUTOMATIC LIMITED-SLIP DIFFERENTIAL (A S D)

150

SPACER WASHER AS REQUIRED 1.65 MM

150

SPACER WASHER AS REQUIRED 1.60 MM

150

SPACER WASHER AS REQUIRED 1.75 MM, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)

150

SPACER WASHER AS REQUIRED 1.80 MM, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)

150

SPACER WASHER AS REQUIRED 1.70 MM

150

SPACER WASHER AS REQUIRED 1.50 MM

150

SPACER WASHER AS REQUIRED 1.85 MM, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)

150

SPACER WASHER AS REQUIRED 2.25 MM, ONLY USED WITH AUTOMATIC LIMITED-SLIP DIFFERENTIAL (A S D)

150

SPACER WASHER AS REQUIRED 2.15 MM

155

SPACER BUSHING

160

THRUST WASHER

165

TAPERED ROLLER BEARING DRIVE PINION, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)

170

TAPERED ROLLER BEARING DRIVE PINION BEARING

170

TAPERED ROLLER BEARING , Replaced By: A0029801102

175

THRUST WASHER

180

FLANGE , Replaced By: A2113500045, +002A0229979947

182

SEAL RING , Replaced By: A0229979947

182

SEAL RING , Replaced By: A0209972147

185

NUT , FROM CHASSIS: 007,008,015,017 219403 011 104138 060 107834 062 104361

185

NUT

999

SEAL RING , Replaced By: A0209972047

999

SEAL RING , Replaced By: A0209972347

999

THRUST WASHER AS REQUIRED 1.6 MM

999

THRUST WASHER AS REQUIRED 1,5 MM

999

THRUST WASHER AS REQUIRED 1,4 MM

999

THRUST WASHER AS REQUIRED 1,3 MM

999

THRUST WASHER AS REQUIRED 1,25 MM

999

THRUST WASHER AS REQUIRED 1,35 MM

999

THRUST WASHER AS REQUIRED 1,45 MM

999

THRUST WASHER AS REQUIRED 1,55 MM

999

THRUST WASHER AS REQUIRED 1,65 MM

999

SPACER WASHER AS REQUIRED 1.5 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632

999

SPACER WASHER AS REQUIRED 1.4 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632

999

SPACER WASHER AS REQUIRED 1.35 MM

999

SPACER WASHER AS REQUIRED 1.3 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632

999

SPACER WASHER AS REQUIRED 1.25 MM

999

SPACER WASHER AS REQUIRED 1.2 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632

999

SPACER WASHER AS REQUIRED 1.15 MM

999

SPACER WASHER AS REQUIRED 1.10 MM

999

SPACER WASHER AS REQUIRED 1.05 MM

999

SPACER WASHER AS REQUIRED 1.0 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632

999

SPACER WASHER AS REQUIRED 0.95 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

SPACER WASHER AS REQUIRED 0.9 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632

999

SPACER WASHER AS REQUIRED 0.85 MM

999

SPACER WASHER AS REQUIRED 0.8 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632

999

SPACER WASHER AS REQUIRED 0.7 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632

999

THRUST WASHER AS REQUIRED 1.25 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)

999

THRUST WASHER AS REQUIRED 1.30 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

SPACER WASHER AS REQUIRED 1,40 MM

999

THRUST WASHER AS REQUIRED 1.50 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)

999

THRUST WASHER AS REQUIRED 1.60 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)

999

SPACER WASHER AS REQUIRED 1,35 MM

999

THRUST WASHER AS REQUIRED 1.45 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)

999

THRUST WASHER AS REQUIRED 1.55 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)

999

SPACER WASHER AS REQUIRED 1.30 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)

999

THRUST WASHER AS REQUIRED 1.65 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)

999

SPACER WASHER AS REQUIRED 1.35 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)

999

SPACER WASHER AS REQUIRED 1.40 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)

999

SPACER WASHER AS REQUIRED 1.45 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)

999

SPACER WASHER AS REQUIRED 1.50 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

SPACER WASHER AS REQUIRED 1.55 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

SPACER WASHER AS REQUIRED 1.60 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

SPACER WASHER AS REQUIRED 1.65 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

SPACER WASHER , Replaced By: A1243532352

999

SPACER WASHER AS REQUIRED 1.75 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

SPACER WASHER , Replaced By: A1243532552

999

SPACER WASHER AS REQUIRED 1.80 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

LOCK AS REQUIRED 3.30 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

LOCK AS REQUIRED 3.35 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

LOCK AS REQUIRED 3.40 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

LOCK AS REQUIRED 3.45 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

LOCK AS REQUIRED 3.50 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)

999

LOCK AS REQUIRED 3.55 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

LOCK AS REQUIRED 3.60 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)

999

LOCK AS REQUIRED 3.65 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

LOCK AS REQUIRED 3.70 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

LOCK AS REQUIRED 3.75 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)

999

LOCK AS REQUIRED 3.80 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)

999

LOCK AS REQUIRED 3.90 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)

999

SPACER WASHER USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

TAPERED ROLLER BEARING RING GEAR BEARING, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

SNAP RING AS REQUIRED 1.80 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

SNAP RING AS REQUIRED 1.75 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

SNAP RING AS REQUIRED 1.70 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

SNAP RING AS REQUIRED 1.65 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

SNAP RING AS REQUIRED 1.60 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

SNAP RING AS REQUIRED 1.55 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

SNAP RING AS REQUIRED 1.50 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

SNAP RING AS REQUIRED 1.45 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

SNAP RING AS REQUIRED 1.40 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

SNAP RING AS REQUIRED 1.35 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

SNAP RING AS REQUIRED 1.30 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

SNAP RING AS REQUIRED 1.25 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)

999

SNAP RING AS REQUIRED 1.20 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)