Поз.
Артикул
Описание
5
CABLE HARNESS BELT LOCKING RETRACTOR,DRIVER'S AND CO-DRIVER'S AIRBAG,F 087501F 113842 AS OF IDENT.NO.:F 113843 INTEGRATED IN TAIL LIGHT CABLE HARNESS,SEE DESIGN GROUP 54,TU 54/540.
35
PIN BUSHING HOUSING SEAT CONTACTING
36
PIN BUSHING HOUSING CONTACT SPIRAL PLUG-CONNECTION,A 123447
38
ROUND PIN BUSHING LIGHT SWITCH 2,5 MM
41
PLUG HOUSING ELECTRONIC ACCELERATOR CONTROL UNIT PLUG-CONNECTION, ONLY FOR AUSTRALIA CODE 625
44
ROUND PIN BUSHING LIGHT SWITCH
53
PLUG CONTACT CARBON,BIPOLAR
71
PLUG INTERMEDIATE CONNECTOR,STARTING LOCK
74
PLUG PIN0.5-2.0 MM2
77
PLUG SOCKET PRIMER PELLET
80
PLUG BELT FEEDER SEAT-CONTACT
83
CLIP13 MM, Replaced By: A0129884678
86
SENSOR ,A 150364 UP TO END MJ 96, Replaced By: A0008209726
86
SENSOR , ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE!A 153290 A 328810 EXCEPT CODE 807 ALSO INSTALLED IN VEHICLE FROM A 328811 WITH CODE 806, Replaced By: A0018201026
86
SENSOR , MAKE SURE THAT ONLY CONTROL UNITS AND SENSORS FROM THE SAME MANIFACTURER,BOSCH OR TEMIC,ARE FITTED DURING REPAIR WORK. COMPO- NENTS FROM 2 DIFFERENT MANUFACTURERS MAY NOT BE MIXED., Replaced By: A0018202126
86
SENSOR , Replaced By: A0018201926
86
SENSOR BELT LOCKING RETRACTOR,DRIVER'S AND CO-DRIVER'S AIRBAG, C 013142 J 016700
86
SENSOR DRIVER'S AIR BAG WITH BELT LOCKING RETRACTOR, IMPOTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER! C 013142 J 016700C 289605
86
SENSOR BELT LOCKING RETRACTOR, AIRBAG AND SIDEBAG, IMPOTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER! MAKE SURE THAT ONLY CONTROL UNITS AND SENSORS FROM THE SAME MANIFACTURER,BOSCH OR TEMIC,ARE FITTED DURING REPAIR WORK. COMPO- NENTS FROM 2 DIFFERENT MANUFACTURERS MAY NOT BE MIXED. F 125158 EXCEPT CODE 805 ALSO INSTALLED IN VEHICLE TO F 125157 WITH CODE 806
89
SCREW , Replaced By: A0009847929
89
SCREW SENSOR TO BRACKET
89
SCREW , Replaced By: A0009842029
92
BRACKET INTERIOR CABLE HARNESS ON AIR-BAG SENSOR CONSOLE,F 087501 AUSTRALIAFROM MODEL YEAR'94 - F 084929
95
SHEET METAL SCREW
98
SENSOR SIDEBAG TEMIC, IMPOTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER! MAKE SURE THAT ONLY CONTROL UNITS AND SENSORS FROM THE SAME MANIFACTURER,BOSCH OR TEMIC,ARE FITTED DURING REPAIR WORK. COMPO- NENTS FROM 2 DIFFERENT MANUFACTURERS MAY NOT BE MIXED.
101
SHEET METAL SCREW BRACKET TO FLOOR PLATE
101
SHEET METAL SCREW BRACKET TO CAB 4,2X13
101
SHEET METAL SCREW BRACKET TO FLOOR PLATE, Replaced By: N000000000460