1. Главная
  2. Mercedes
  3. CAR
  4. 190 E 2.3 JAPAN FROM 09/88
  5. 201.028
  6. 35 REAR AXLE
  7. 001 REAR AXLE WITH A S D ON VEHICLES WITH, OR LESS, A B S IL.1

Mercedes A1153531962 - ШАЙБА

190 E 2.3 JAPAN FROM 09/88 201.028
35 REAR AXLE - 001 REAR AXLE WITH A S D ON VEHICLES WITH, OR LESS, A B S IL.1
  • Поз.
    Артикул
    Описание
  • 14
    DIFFERENTIAL GEAR LESS RING GEAR AND PINION
  • 17
    THRUST WASHER AS REQUIRED 1,65 MM
  • 17
    THRUST WASHER AS REQUIRED 1,4 MM
  • 17
    THRUST WASHER AS REQUIRED 1,5 MM
  • 17
    THRUST WASHER AS REQUIRED 1,25 MM
  • 17
    THRUST WASHER AS REQUIRED 1,45 MM
  • 17
    THRUST WASHER AS REQUIRED 1.6 MM
  • 17
    THRUST WASHER AS REQUIRED 1,35 MM
  • 17
    THRUST WASHER AS REQUIRED 1,3 MM
  • 17
    THRUST WASHER AS REQUIRED 1,55 MM
  • 20
    SIDE GEAR
  • 23
    DIFFERENTIAL PINION
  • 26
    SPHERICAL WASHER
  • 29
    PIN
  • 32
    CLAMPING SLEEVE
  • 44
    RING GEAR AND PINION , Replaced By: A1243502239
  • 47
    GEAR 29 TEETH
  • 50
    SCREW RING GEAR TO DIFFERENTIAL CASE
  • 50
    SCREW , Replaced By: A2029902801
  • 128
    SPACER WASHER AS REQUIRED 2.30 MM, ONLY USED WITH AUTOMATIC LIMITED-SLIP DIFFERENTIAL (A S D)
  • 128
    SPACER WASHER AS REQUIRED 2.40 MM, ONLY USED WITH AUTOMATIC LIMITED-SLIP DIFFERENTIAL (A S D)
  • 128
    SPACER WASHER AS REQUIRED 1.95 MM
  • 128
    SPACER WASHER AS REQUIRED 1.50 MM
  • 128
    SPACER WASHER AS REQUIRED 1.90 MM
  • 128
    SPACER WASHER AS REQUIRED 2.20 MM
  • 128
    SPACER WASHER AS REQUIRED 1.75 MM, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
  • 128
    SPACER WASHER AS REQUIRED 2.05 MM
  • 128
    SPACER WASHER AS REQUIRED 1.70 MM
  • 128
    SPACER WASHER AS REQUIRED 2.15 MM
  • 128
    SPACER WASHER AS REQUIRED 1.80 MM, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
  • 128
    SPACER WASHER AS REQUIRED 2.10 MM, ONLY USED WITH AUTOMATIC LIMITED-SLIP DIFFERENTIAL (A S D)
  • 128
    SPACER WASHER AS REQUIRED 2.00 MM
  • 128
    SPACER WASHER AS REQUIRED 1.55 MM, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
  • 128
    SPACER WASHER AS REQUIRED 2.25 MM, ONLY USED WITH AUTOMATIC LIMITED-SLIP DIFFERENTIAL (A S D)
  • 128
    SPACER WASHER AS REQUIRED 1.85 MM, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
  • 128
    SPACER WASHER AS REQUIRED 1.60 MM
  • 128
    SPACER WASHER AS REQUIRED 2.35 MM
  • 128
    SPACER WASHER AS REQUIRED 1.65 MM
  • 131
    TAPERED ROLLER BEARING DRIVE PINION, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
  • 134
    SPACER BUSHING
  • 137
    THRUST WASHER
  • 140
    TAPERED ROLLER BEARING , Replaced By: A0029801102
  • 140
    TAPERED ROLLER BEARING DRIVE PINION BEARING
  • 143
    THRUST WASHER
  • 146
    SEAL RING , Replaced By: A0209972147
  • 146
    SEAL RING , Replaced By: A0229979947
  • 146
    SEAL RING , Replaced By: A0259970047
  • 149
    FLANGE , EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 124: B 323594, F 155481 201: A 580987, F 764253, Replaced By: A1243506845
  • 149
    FLANGE , Replaced By: A2113500045, +002A0229979947
  • 149
    FLANGE PROPELLER SHAFT
  • 149
    FLANGE PROPELLER SHAFT 90 MM, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
  • 152
    NUT , FROM CHASSIS: 007,008,015,017 219403 011 104138 060 107834 062 104361
  • 999
    AXLE HOUSING , Replaced By: A2013501464
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]