1. Главная
  2. Mercedes
  3. CAR
  4. R 280 4MATIC / R 300 4MATIC
  5. 251.062
  6. 32 SPRINGS, SUSPENSION AND HYDRAULIC SYSTEM
  7. 233 COMPRESSOR,PRESSURE RESERVOIR AND VALVE UNIT

Mercedes A2113270430 - РЕЗИНОВЫЙ БУФЕР

R 280 4MATIC / R 300 4MATIC 251.062
32 SPRINGS, SUSPENSION AND HYDRAULIC SYSTEM - 233 COMPRESSOR,PRESSURE RESERVOIR AND VALVE UNIT
  • Поз.
    Артикул
    Описание
  • 15
    COMPRESSOR , WHEN REPLACING THE COMPRESSOR, THE RELAY DG 54 TU 080 SLOT G MUST ALSO BE REPLACED
  • 15
    COMPRESSOR , WHEN REPLACING THE COMPRESSOR, THE RELAY DG 54 TU 080 SLOT G MUST ALSO BE REPLACED
  • 15
    COMPRESSOR UNIT , A 06272820070709 WHEN REPLACING THE COMPRESSOR, THE RELAY DG 54 TU 080 SLOT G MUST ALSO BE REPLACED, Replaced By: A2513202004
  • 15
    COMPRESSOR UNIT , WHEN REPLACING THE COMPRESSOR, THE RELAY DG 54 TU 080 SLOT G MUST ALSO BE REPLACED, Replaced By: A2513202704
  • 15
    COMPRESSOR , A 06272820070709 WHEN REPLACING THE COMPRESSOR, THE RELAY DG 54 TU 080 SLOT G MUST ALSO BE REPLACED, Replaced By: A2513202604
  • 15
    COMPRESSOR UNIT , WHEN REPLACING THE COMPRESSOR, THE RELAY DG 54 TU 080 SLOT G MUST ALSO BE REPLACED, Replaced By: A2513202104
  • 20
    BRACKET COMPRESSOR
  • 30
    VALVE BLOCK PNEUMATIC SUSPENSION, A 02365920090515
  • 30
    VALVE BLOCK PNEUMATIC SUSPENSION, A 02365820090515
  • 30
    VALVE BLOCK VALVE UNIT
  • 32
    CONNECTION PIPE SOCKET PRESSURE LINE TO COMPRESSOR
  • 35
    CONNECTOR DELIVERY LINE
  • 40
    BOLT TO PRESSURE SENSOR
  • 60
    RUBBER BUMPER COMPRESSOR TO BRACKET
  • 70
    RUBBER BUMPER COMPRESSOR TO BRACKET
  • 80
    WASHER
  • 90
    SPRING COMPRESSOR TO BRACKET
  • 100
    SPACER TUBE COMPRESSOR TO BRACKET
  • 110
    NUT BRACKET TO BODY SHELL M6
  • 120
    AIR FILTER COMPRESSOR, Replaced By: A2513200269
  • 120
    FILTER COMPRESSOR
  • 125
    SPRING HOSE CLAMP VENT LINE TO ENGINE OR RADIATOR 14.7-16.5 MM/ 12 MM, A 01842020000330
  • 127
    RETAINING COLLAR
  • 130
    HEXAGON HEAD BOLT. SCREW CLUTCH TO FLYWHEEL M8X16 MM
  • 130
    HEXALOBULAR BOLT BRACKET MOUNTING M8X16,V 207570
  • 135
    HEXAGON NUT COMPRESSOR BRACKET
  • 160
    PRESSURE ACCUMULATOR
  • 160
    AIR CELL , Replaced By: A2513200115
  • 300
    HEXAGON HEAD BOLT. SCREW CLUTCH TO FLYWHEEL M8X16 MM
  • 300
    HEXALOBULAR BOLT BRACKET MOUNTING M8X16,V 207570
  • 310
    BUSHING COMPRESSOR BRACKET
  • 530
    INSULATION COMPRESSOR
  • 700
    RECEPTACLE HOUSING RIGHT POWER WINDOW MOTOR 2-PIN SLK2.8,M10/2
  • 700
    PIN BUSHING HOUSING ENGINE COMPARTMENT/ENGINE CONNECTOR 2-PIN SLK2.8,X26/31
  • 705
    REP.SET CONTACT4.0 MM2 SLK, CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS.SOLDER CONNECTOR SLEEVES:TOTAL WIRE CROSS-SECTION: A 001 546 99 41GREEN0.7 -2.4 MM2 A 002 546 00 41RED2.0 -4.0 MM2 A 002 546 01 41BLUE 3.5 -8.0 MM2 A 002 546 11 41YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2
  • 705
    REP.SET CONTACT0.75 MM2 SLK2.8, CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS.SOLDER CONNECTOR SLEEVES:TOTAL WIRE CROSS-SECTION: A 001 546 99 41GREEN0.7 -2.4 MM2 A 002 546 00 41RED2.0 -4.0 MM2 A 002 546 01 41BLUE 3.5 -8.0 MM2 A 002 546 11 41YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2
  • 800
    PLUG VALVE UNIT SELF-LEVELLING DEVICE 10-PIN MT2,Y36/6*1
  • 810
    CONTACT SPRING WITH DETENT 0.5-1.0 MM2
  • 820
    CLUTCH. PIN BUSHING HOUSING SIREN
  • 830
    CONTACT BUSHING WITH SINGLE-WIRE SEAL 0.5MM2,126373
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]