1. Главная
  2. Mercedes
  3. AXLE
  4. AL 1/4-3.1
  5. 730.330
  6. 33 FRONT AXLE
  7. 405 AXLE INTRODUCTION,(DIFFERENTIAL GEAR)

Mercedes A6013510072 - Гайка / mutter

AL 1/4-3.1 730.330
33 FRONT AXLE - 405 AXLE INTRODUCTION,(DIFFERENTIAL GEAR)
  • Поз.
    Артикул
    Описание
  • 5
    AXLE INTRODUCTION LESS RING GEAR AND PINION
  • 8
    SCREW COVER TO DIFFERENTIAL CASE
  • 11
    DIFFERENTIAL SPIDER
  • 14
    DIFFERENTIAL PINION AXLE INSERT
  • 17
    SPHERICAL WASHER1.00 MM
  • 20
    SIDE GEAR AXLE INSERT
  • 23
    THRUST WASHER AS REQUIRED 1.85 MM
  • 23
    THRUST WASHER AS REQUIRED 1.30 MM
  • 23
    THRUST WASHER AS REQUIRED 1.50 MM
  • 23
    THRUST WASHER AS REQUIRED 1.55 MM,018036 UP TO IDENT NO. 026799,FROM IDENT NO. SEE SEPARATE SPARE PARTS LIST 741.030
  • 23
    THRUST WASHER AS REQUIRED 1.60 MM
  • 23
    THRUST WASHER AS REQUIRED 1.40 MM
  • 23
    THRUST WASHER AS REQUIRED 1.80 MM
  • 23
    THRUST WASHER AS REQUIRED 1.75 MM
  • 23
    THRUST WASHER AS REQUIRED 1.45 MM
  • 23
    THRUST WASHER AS REQUIRED 1.70 MM
  • 23
    THRUST WASHER AS REQUIRED 1.65 MM
  • 23
    THRUST WASHER , Replaced By: A6693531362
  • 23
    THRUST WASHER , Replaced By: A6693531362
  • 23
    THRUST WASHER , Replaced By: A6693531562
  • 23
    THRUST WASHER , Replaced By: A6693531762
  • 23
    THRUST WASHER , Replaced By: A6693531962
  • 23
    THRUST WASHER , Replaced By: A6693532162
  • 23
    THRUST WASHER , Replaced By: A6693532362
  • 26
    REPAIR KIT DIFFERENTIAL GEAR
  • 29
    SCREW RING GEAR TO DIFFERENTIAL CASE
  • 29
    SCREW , Replaced By: A6709900501
  • 32
    RING GEAR AND PINION RATIO: 10:41
  • 32
    RING GEAR AND PINION AXLE INTERODUCTION, (DIFFERENTIAL GEAR), RATIO: 41:10
  • 35
    TAPERED ROLLER BEARING DRIVE SHAFT
  • 35
    TAPERED ROLLER BEARING DRIVE SHAFT
  • 35
    TAPERED ROLLER BEARING OUTSIDE
  • 35
    TAPERED ROLLER BEARING DRIVE SHAFT
  • 35
    TAPERED ROLLER BEARING OUTSIDE
  • 38
    SCREW COLLAR DIFFERENTIAL GEAR ADJUSTMENT
  • 41
    LOCK DIFFERENTIAL GEAR ADJUSTMENT
  • 41
    LOCK , Replaced By: A6693530073
  • 44
    SCREW PROTECTIVE PLATE TO EXHAUST PIPE
  • 47
    TOOTHED WASHER LEVER TO AIR SPRING VALVE,K 186867
  • 50
    CYLINDR. ROLLER BEARING DRIVE SHAFT,REAR
  • 50
    CYLINDR. ROLLER BEARING PINION,INSIDE
  • 50
    CYLINDR. ROLLER BEARING PINION,INSIDE
  • 50
    CYLINDR. ROLLER BEARING PINION,INSIDE
  • 53
    LOCK RING BEARING BRACKET,4 972621
  • 56
    SPACER WASHER AS REQUIRED 0.50 MM
  • 56
    SPACER WASHER AS REQUIRED 1.00 MM
  • 56
    SPACER WASHER AS REQUIRED 0.30 MM
  • 56
    SPACER WASHER AS REQUIRED 0.45 MM
  • 56
    SPACER WASHER AS REQUIRED 0.10 MM
  • 56
    SPACER WASHER AS REQUIRED 0.25 MM
  • 59
    TAPERED ROLLER BEARING DRIVE PINION,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 59
    TAPERED ROLLER BEARING DRIVE PINION,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 59
    TAPERED ROLLER BEARING DRIVE PINION,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 62
    SPACER RING AS REQUIRED 12.60 MM,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 62
    SPACER RING AS REQUIRED 12.00 MM,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 65
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.58 MM, WITH 5.6-TON TOTAL WEIGHT FROM IDENT NO. 013362
  • 65
    SPACER RING AS REQUIRED 7.40 MM
  • 65
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.62 MM
  • 65
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.42 MM
  • 65
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.68 MM, WITH 5.6-TON TOTAL WEIGHT FROM IDENT NO. 013362
  • 65
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.52 MM, WITH 5.6-TON TOTAL WEIGHT FROM IDENT NO. 013362
  • 65
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.84 MM
  • 65
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.86 MM
  • 65
    SPACER RING AS REQUIRED 7.56 MM
  • 65
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, IN REQUIRED 7.82 MM, FIRST EXHAUST STOCK OF OLD PARTS UP TO CHASSIS 094397 EXCEPT FOR,SEE FOOTNOTE 5,ON TRUCKS,UP TO CHASSIS 013947 ON BUSES 309.000-049 UP TO CHASSIS 001447,309.100-149 UP TO CHASSIS 019705,309.070-091 UP TO CHASSIS 000202,309.170-191 UP TO CHASSIS 0 01094 309.000-049 FROM CHASSIS 001448,309.100-149 FROM CHASSIS 019706,309.070-091 FROM CHASSIS 000203,309.170-191 FROM CHASSIS 00109 5,309.370-391,400-499 FROM CHASSIS 000001
  • 65
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, IN REQUIRED 7.44 MM, FIRST EXHAUST STOCK OF OLD PARTS UP TO CHASSIS 094397 EXCEPT FOR,SEE FOOTNOTE 5,ON TRUCKS,UP TO CHASSIS 013947 ON BUSES 309.000-049 UP TO CHASSIS 001447,309.100-149 UP TO CHASSIS 019705,309.070-091 UP TO CHASSIS 000202,309.170-191 UP TO CHASSIS 0 01094 309.000-049 FROM CHASSIS 001448,309.100-149 FROM CHASSIS 019706,309.070-091 FROM CHASSIS 000203,309.170-191 FROM CHASSIS 00109 5,309.370-391,400-499 FROM CHASSIS 000001
  • 65
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.80 MM, WITH 5.6-TON TOTAL WEIGHT FROM IDENT NO. 013362
  • 65
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.66 MM
  • 65
    SPACER RING AS REQUIRED 7.75 MM,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 65
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 8.00 MM
  • 65
    SPACER RING AS REQUIRED 7.70 MM,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 65
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.64 MM, WITH 5.6-TON TOTAL WEIGHT FROM IDENT NO. 013362
  • 65
    SPACER RING AS REQUIRED 7.55 MM,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 65
    SPACER RING AS REQUIRED 7.90 MM,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 65
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, IN REQUIRED 7.48 MM, FIRST EXHAUST STOCK OF OLD PARTS UP TO CHASSIS 094397 EXCEPT FOR,SEE FOOTNOTE 5,ON TRUCKS,UP TO CHASSIS 013947 ON BUSES 309.000-049 UP TO CHASSIS 001447,309.100-149 UP TO CHASSIS 019705,309.070-091 UP TO CHASSIS 000202,309.170-191 UP TO CHASSIS 0 01094 309.000-049 FROM CHASSIS 001448,309.100-149 FROM CHASSIS 019706,309.070-091 FROM CHASSIS 000203,309.170-191 FROM CHASSIS 00109 5,309.370-391,400-499 FROM CHASSIS 000001
  • 65
    SPACER RING AS REQUIRED 7.78 MM
  • 65
    SPACER RING AS REQUIRED 7.98 MM
  • 65
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.46 MM
  • 65
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.96 MM
  • 65
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.72 MM, WITH 5.6-TON TOTAL WEIGHT FROM IDENT NO. 013362
  • 65
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.76 MM, WITH 5.6-TON TOTAL WEIGHT FROM IDENT NO. 013362
  • 65
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.60 MM, WITH 5.6-TON TOTAL WEIGHT FROM IDENT NO. 013362
  • 65
    SPACER RING AS REQUIRED 7.50 MM,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 65
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.88 MM
  • 65
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, IN REQUIRED 7.92 MM, FIRST EXHAUST STOCK OF OLD PARTS UP TO CHASSIS 094397 EXCEPT FOR,SEE FOOTNOTE 5,ON TRUCKS,UP TO CHASSIS 013947 ON BUSES 309.000-049 UP TO CHASSIS 001447,309.100-149 UP TO CHASSIS 019705,309.070-091 UP TO CHASSIS 000202,309.170-191 UP TO CHASSIS 0 01094 309.000-049 FROM CHASSIS 001448,309.100-149 FROM CHASSIS 019706,309.070-091 FROM CHASSIS 000203,309.170-191 FROM CHASSIS 00109 5,309.370-391,400-499 FROM CHASSIS 000001
  • 65
    SPACER RING AS REQUIRED 7.95 MM,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 65
    SPACER WASHER , Replaced By: A3093530951
  • 65
    SPACER WASHER AS REQUIRED 7.70 MM
  • 65
    SPACER WASHER AS REQUIRED 7.90 MM
  • 65
    SPACER WASHER AS REQUIRED 7.42 MM
  • 65
    SPACER WASHER AS REQUIRED 7.46 MM
  • 65
    SPACER WASHER , Replaced By: A3093531151
  • 65
    SPACER WASHER , Replaced By: A3093531351
  • 65
    SPACER WASHER , Replaced By: A3093531551
  • 65
    SPACER WASHER , Replaced By: A3093531751
  • 65
    SPACER WASHER , Replaced By: A3093532151
  • 65
    SPACER WASHER AS REQUIRED 7.78 MM
  • 65
    SPACER WASHER AS REQUIRED 7.82 MM
  • 65
    SPACER WASHER , Replaced By: A3093532751
  • 65
    SPACER WASHER , Replaced By: A3093533151
  • 65
    SPACER WASHER , Replaced By: A3093533351
  • 68
    TAPERED ROLLER BEARING DRIVE PINION,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 68
    TAPERED ROLLER BEARING DRIVE PINION,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 68
    TAPERED ROLLER BEARING DRIVE PINION,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 71
    SPACER RING AS REQUIRED 10.00 MM
  • 74
    SCREW COLLAR DRIVE PINION
  • 77
    LOCK DIFFERENTIAL GEAR ADJUSTMENT
  • 77
    LOCK , Replaced By: A6693530073
  • 80
    SCREW PROTECTIVE PLATE TO EXHAUST PIPE
  • 83
    TOOTHED WASHER LEVER TO AIR SPRING VALVE,K 186867
  • 86
    SEAL RING FLANGE TO DRIVE PINION
  • 86
    SEAL RING FLANGE TO DRIVE PINION
  • 86
    SEAL RING , Replaced By: A0129973047
  • 89
    FLANGE
  • 92
    NUT FLANGE TO DRIVE PINION
  • 92
    NUT , Replaced By: A6013510072
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]