1. Главная
  2. Mercedes
  3. AXLE
  4. AL 1/8 C-3
  5. 730.354
  6. 33 FRONT AXLE
  7. 300 DIFFERENTIAL GEAR

Mercedes A6013510172 - Гайка

AL 1/8 C-3 730.354
33 FRONT AXLE - 300 DIFFERENTIAL GEAR
  • Поз.
    Артикул
    Описание
  • 5
    AXLE INTRODUCTION LESS RING GEAR AND PINION
  • 8
    SCREW COVER TO DIFFERENTIAL CASE
  • 11
    DIFFERENTIAL SPIDER
  • 14
    DIFFERENTIAL PINION AXLE INSERT
  • 17
    SPHERICAL WASHER1.00 MM
  • 20
    SIDE GEAR AXLE INSERT
  • 23
    THRUST WASHER AS REQUIRED 1.50 MM
  • 26
    REPAIR KIT DIFFERENTIAL GEAR
  • 29
    RING GEAR AND PINION RATIO: 43:10
  • 29
    RING GEAR AND PINION AXLE INTERODUCTION, (DIFFERENTIAL GEAR), RATIO: 43:11
  • 32
    SCREW RING GEAR TO DIFFERENTIAL CASE
  • 35
    TAPERED ROLLER BEARING OUTSIDE
  • 35
    TAPERED ROLLER BEARING DRIVE SHAFT
  • 35
    TAPERED ROLLER BEARING DRIVE SHAFT
  • 38
    SCREW COLLAR DIFFERENTIAL GEAR ADJUSTMENT
  • 41
    LOCK DIFFERENTIAL GEAR ADJUSTMENT
  • 44
    SCREW PROTECTIVE PLATE TO EXHAUST PIPE
  • 47
    CYLINDR. ROLLER BEARING PINION,INSIDE
  • 47
    CYLINDR. ROLLER BEARING PINION,INSIDE
  • 47
    CYLINDR. ROLLER BEARING DRIVE SHAFT,REAR
  • 47
    CYLINDR. ROLLER BEARING PINION,INSIDE
  • 50
    LOCK RING SHACKLE TO BRAKE SHOE
  • 53
    SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, REAR,AS REQUIRED 1.00 MM
  • 53
    SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, REAR,AS REQUIRED 0.25 MM
  • 53
    SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, REAR,AS REQUIRED 0.45 MM
  • 53
    SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, REAR,AS REQUIRED 0.30 MM
  • 53
    SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, REAR,AS REQUIRED 0.50 MM
  • 53
    SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, REAR,AS REQUIRED 0.10 MM
  • 56
    TAPERED ROLLER BEARING DRIVE SHAFT,REAR
  • 56
    TAPERED ROLLER BEARING DRIVE SHAFT,FRONT
  • 56
    TAPERED ROLLER BEARING DRIVE SHAFT,FRONT
  • 59
    SPACER RING AS REQUIRED 12.00 MM,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 59
    SPACER RING AS REQUIRED 12.60 MM,001448,309.0, 019706,309.1 UP TO IDENT NO.180280,FROM IDENT NO.180281,SEE UNIT MICROFICHE,MODEL:741.0
  • 62
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.90 MM
  • 62
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 8.00 MM
  • 62
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.60 MM
  • 62
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.80 MM
  • 62
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.40 MM
  • 62
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.70 MM
  • 62
    SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT,AS REQUIRED 7.50 MM
  • 65
    SPACER RING AS REQUIRED 10.00 MM
  • 68
    SCREW COLLAR ADJUSTMENT, DRIVE SHAFT BEVEL GEAR/ CROWN WHEEL
  • 71
    LOCK SCREW COLLAR
  • 74
    SCREW PROTECTIVE PLATE TO EXHAUST PIPE
  • 77
    SEAL RING FLANGE TO DRIVE PINION
  • 77
    SEAL RING FLANGE TO DRIVE PINION
  • 80
    COUPLING FLANGE (COUPLING FLANGE),DIA., 130 MM
  • 80
    COUPLING FLANGE (COUPLING FLANGE),DIA., 120 MM
  • 83
    NUT FLANGE TO PINION,R 067538
  • 999
    NUT FLANGE TO DRIVE PINION
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]