Поз.
Артикул
Описание
15
DIFFERENTIAL GEAR LESS RING GEAR AND PINION, 201.024 USED WITH MANUAL FIVE-SPEED TRANSMISSION FROM IDENT NO. A 456129 , F 539197 ALSO INSTALLED ON: A 411067,A 418669,A 434248,A 437606,A 438142,A 438444,A 441817,A 442074,A 442076,A 444387,A 446081. F 456209,F 465655,F 488676,F 492064,F 497536,F 498653,F 506309,F 523900,F 523920,F 523947,F 537867.
15
DIFFERENTIAL GEAR LESS RING GEAR AND PINION
15
DIFFERENTIAL GEAR LESS RING GEAR AND PINION, 201.023UP TO IDENT NO. A 366433 , F 343121 201.024UP TO IDENT NO. A 456128 , F 539196 EXCEPT FOR A 411067,A 418669,A 434248,A 437606,A 438142,A 438444,A 441817,A 442074,A 442076,A 444387,A 446081. F 456209,F 465655,F 488676,F 492064,F 497536,F 498653,F 506309,F 523900,F 523920,F 523947,F 537867.
20
THRUST WASHER AS REQUIRED 3.5 MM, WITH LINING ON ONE SIDE ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
20
THRUST WASHER AS REQUIRED 2,8 MM, WITH LINING ON ONE SIDE
20
THRUST WASHER AS REQUIRED 3,7 MM, WITH LINING ON ONE SIDE
20
THRUST WASHER AS REQUIRED 3,0 MM, WITH LINING ON ONE SIDE
20
THRUST WASHER AS REQUIRED 4,0 MM, WITH LINING ON ONE SIDE
20
THRUST WASHER AS REQUIRED 2.9 MM, WITH LINING ON ONE SIDE
20
THRUST WASHER AS REQUIRED 3.2 MM, WITH LINING ON ONE SIDE ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
20
THRUST WASHER AS REQUIRED 3.6 MM, WITH LINING ON ONE SIDE ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
20
THRUST WASHER AS REQUIRED 3.1 MM, WITH LINING ON ONE SIDE
20
THRUST WASHER AS REQUIRED 3.3 MM, WITH LINING ON ONE SIDE ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
20
THRUST WASHER AS REQUIRED 3,8 MM, WITH LINING ON ONE SIDE
20
THRUST WASHER AS REQUIRED 3.4 MM, WITH LINING ON ONE SIDE ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
25
THRUST WASHER LESS LINING, WITH 5 SHACKLES, ONLY USED WITH AUTOMATIC LIMITED-SLIP DIFFERENTIAL (A S D)
30
THRUST WASHER WITH LINING ON BOTH SIDES
35
THRUST WASHER LESS LINING, W/4 SHACKLES & 2 NOTCHES, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
40
SIDE GEAR ONLY USED WITH ASD
45
DIFFERENTIAL PINION
50
SPHERICAL WASHER
55
CLAMPING SLEEVE
60
PIN
65
RING GEAR AND PINION1:2,87, USE REAR AXLE OIL A 001 989 17 03
65
RING GEAR AND PINION1:3,46, 201.024 USED WITH MANUAL FIVE-SPEED TRANSMISSION FROM IDENT NO. A 456129 , F 539197 ALSO INSTALLED ON: A 411067,A 418669,A 434248,A 437606,A 438142,A 438444,A 441817,A 442074,A 442076,A 444387,A 446081. F 456209,F 465655,F 488676,F 492064,F 497536,F 498653,F 506309,F 523900,F 523920,F 523947,F 537867.
65
RING GEAR AND PINION1:3,27, 201.023UP TO IDENT NO. A 366433 , F 343121 201.024UP TO IDENT NO. A 456128 , F 539196 EXCEPT FOR A 411067,A 418669,A 434248,A 437606,A 438142,A 438444,A 441817,A 442074,A 442076,A 444387,A 446081. F 456209,F 465655,F 488676,F 492064,F 497536,F 498653,F 506309,F 523900,F 523920,F 523947,F 537867. USE REAR AXLE OIL A 001 989 17 03
65
RING GEAR AND PINION1:3.67, USE REAR AXLE OIL A 001 989 17 03
65
RING GEAR AND PINION , Replaced By: A1243505639
65
RING GEAR AND PINION , Replaced By: A1243502239
65
RING GEAR AND PINION , Replaced By: A1243504939
65
RING GEAR AND PINION , Replaced By: A1243504239
70
SCREW , Replaced By: A2029902801
70
SCREW RING GEAR TO DIFFERENTIAL CASE
75
GEAR 26 TEETH FUER 1:3.69
75
GEAR 28 TEETH
80
TAPERED ROLLER BEARING RING GEAR BEARING, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
85
LOCK AS REQUIRED 3.95 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
85
LOCK AS REQUIRED 4.05 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
85
LOCK AS REQUIRED 4.50 MM
85
LOCK AS REQUIRED 3.6 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
85
LOCK AS REQUIRED 4.60 MM
85
LOCK AS REQUIRED 4.0 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
85
LOCK AS REQUIRED 4.1 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
85
LOCK AS REQUIRED 4.3 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
85
LOCK AS REQUIRED 4.2 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
85
LOCK AS REQUIRED 3.9 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
85
LOCK AS REQUIRED 4.15 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
85
LOCK AS REQUIRED 3.8 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
85
LOCK AS REQUIRED 3.85 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
85
LOCK AS REQUIRED 4.4 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
85
LOCK AS REQUIRED 3.7 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
90
OIL COLLECTOR
150
SPACER WASHER AS REQUIRED 1.80 MM, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
150
SPACER WASHER AS REQUIRED 2.25 MM, ONLY USED WITH AUTOMATIC LIMITED-SLIP DIFFERENTIAL (A S D)
150
SPACER WASHER AS REQUIRED 1.85 MM, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
150
SPACER WASHER AS REQUIRED 1.90 MM
150
SPACER WASHER AS REQUIRED 2.35 MM
150
SPACER WASHER AS REQUIRED 1.50 MM
150
SPACER WASHER AS REQUIRED 1.55 MM, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
150
SPACER WASHER AS REQUIRED 2.00 MM
150
SPACER WASHER AS REQUIRED 1.65 MM
150
SPACER WASHER AS REQUIRED 2.30 MM, ONLY USED WITH AUTOMATIC LIMITED-SLIP DIFFERENTIAL (A S D)
150
SPACER WASHER AS REQUIRED 2.40 MM, ONLY USED WITH AUTOMATIC LIMITED-SLIP DIFFERENTIAL (A S D)
150
SPACER WASHER AS REQUIRED 2.10 MM, ONLY USED WITH AUTOMATIC LIMITED-SLIP DIFFERENTIAL (A S D)
150
SPACER WASHER AS REQUIRED 2.20 MM
150
SPACER WASHER AS REQUIRED 1.60 MM
150
SPACER WASHER AS REQUIRED 1.75 MM, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
150
SPACER WASHER AS REQUIRED 1.95 MM
150
SPACER WASHER AS REQUIRED 2.05 MM
150
SPACER WASHER AS REQUIRED 2.15 MM
150
SPACER WASHER AS REQUIRED 1.70 MM
155
SPACER BUSHING
160
THRUST WASHER
165
TAPERED ROLLER BEARING DRIVE PINION, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
170
TAPERED ROLLER BEARING DRIVE PINION BEARING
170
TAPERED ROLLER BEARING , Replaced By: A0029801102
175
THRUST WASHER
180
FLANGE , Replaced By: A2113500045, +002A0229979947
182
SEAL RING , Replaced By: A0229979947
182
SEAL RING , Replaced By: A0209972147
185
NUT , FROM CHASSIS: 007,008,015,017 219403 011 104138 060 107834 062 104361
185
NUT
999
SEAL RING , Replaced By: A0209972047
999
SEAL RING , Replaced By: A0209972347
999
THRUST WASHER AS REQUIRED 1.6 MM
999
THRUST WASHER AS REQUIRED 1,5 MM
999
THRUST WASHER AS REQUIRED 1,4 MM
999
THRUST WASHER AS REQUIRED 1,3 MM
999
THRUST WASHER AS REQUIRED 1,25 MM
999
THRUST WASHER AS REQUIRED 1,35 MM
999
THRUST WASHER AS REQUIRED 1,45 MM
999
THRUST WASHER AS REQUIRED 1,55 MM
999
THRUST WASHER AS REQUIRED 1,65 MM
999
SPACER WASHER AS REQUIRED 1.5 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
999
SPACER WASHER AS REQUIRED 1.4 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
999
SPACER WASHER AS REQUIRED 1.35 MM
999
SPACER WASHER AS REQUIRED 1.3 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
999
SPACER WASHER AS REQUIRED 1.25 MM
999
SPACER WASHER AS REQUIRED 1.2 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
999
SPACER WASHER AS REQUIRED 1.15 MM
999
SPACER WASHER AS REQUIRED 1.10 MM
999
SPACER WASHER AS REQUIRED 1.05 MM
999
SPACER WASHER AS REQUIRED 1.0 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
999
SPACER WASHER AS REQUIRED 0.95 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
SPACER WASHER AS REQUIRED 0.9 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
999
SPACER WASHER AS REQUIRED 0.85 MM
999
SPACER WASHER AS REQUIRED 0.8 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
999
SPACER WASHER AS REQUIRED 0.7 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
999
THRUST WASHER AS REQUIRED 1.25 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)
999
THRUST WASHER AS REQUIRED 1.30 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
SPACER WASHER AS REQUIRED 1,40 MM
999
THRUST WASHER AS REQUIRED 1.50 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)
999
THRUST WASHER AS REQUIRED 1.60 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)
999
SPACER WASHER AS REQUIRED 1,35 MM
999
THRUST WASHER AS REQUIRED 1.45 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)
999
THRUST WASHER AS REQUIRED 1.55 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)
999
SPACER WASHER AS REQUIRED 1.30 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)
999
THRUST WASHER AS REQUIRED 1.65 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)
999
SPACER WASHER AS REQUIRED 1.35 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)
999
SPACER WASHER AS REQUIRED 1.40 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)
999
SPACER WASHER AS REQUIRED 1.45 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)
999
SPACER WASHER AS REQUIRED 1.50 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
SPACER WASHER AS REQUIRED 1.55 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
SPACER WASHER AS REQUIRED 1.60 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
SPACER WASHER AS REQUIRED 1.65 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
SPACER WASHER , Replaced By: A1243532352
999
SPACER WASHER AS REQUIRED 1.75 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
SPACER WASHER , Replaced By: A1243532552
999
SPACER WASHER AS REQUIRED 1.80 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
LOCK AS REQUIRED 3.30 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
LOCK AS REQUIRED 3.35 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
LOCK AS REQUIRED 3.40 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
LOCK AS REQUIRED 3.45 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
LOCK AS REQUIRED 3.50 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)
999
LOCK AS REQUIRED 3.55 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
LOCK AS REQUIRED 3.60 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)
999
LOCK AS REQUIRED 3.65 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
LOCK AS REQUIRED 3.70 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
LOCK AS REQUIRED 3.75 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)
999
LOCK AS REQUIRED 3.80 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)
999
LOCK AS REQUIRED 3.90 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)
999
SPACER WASHER USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
TAPERED ROLLER BEARING RING GEAR BEARING, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
SNAP RING AS REQUIRED 1.80 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
SNAP RING AS REQUIRED 1.75 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
SNAP RING AS REQUIRED 1.70 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
SNAP RING AS REQUIRED 1.65 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
SNAP RING AS REQUIRED 1.60 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
SNAP RING AS REQUIRED 1.55 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
SNAP RING AS REQUIRED 1.50 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
SNAP RING AS REQUIRED 1.45 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
SNAP RING AS REQUIRED 1.40 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
SNAP RING AS REQUIRED 1.35 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
SNAP RING AS REQUIRED 1.30 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
SNAP RING AS REQUIRED 1.25 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
999
SNAP RING AS REQUIRED 1.20 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (A S D)