1. Главная
  2. Mercedes
  3. CAR
  4. E 320 CDI
  5. 210.226 FROM MODELLJAHR CODE 800
  6. 54 ELECTRICAL EQUIPMENT AND INSTRUMENTS
  7. 545 MAIN CABLE HARNESS FRAME FLOOR UNIT IL. 1

Mercedes A0335450028 - Втулка

E 320 CDI 210.226 FROM MODELLJAHR CODE 800
54 ELECTRICAL EQUIPMENT AND INSTRUMENTS - 545 MAIN CABLE HARNESS FRAME FLOOR UNIT IL. 1
  • Поз.
    Артикул
    Описание
  • 10
    CONTROL UNIT SRS, WINDOWBAG TEMIC, A 698508 X 012426 EXEPT FOR VEHICULES WITH CODE 808 ALSO INSTALLED IN VEHICLE TO A 698507, X 012425 WITH CODE 809 MAKE SURE THAT ONLY CONTROL UNITS AND SENSORS FROM THE SAME MANIFACTURER,BOSCH OR TEMIC,ARE FITTED DURING REPAIR WORK. COMPO- NENTS FROM 2 DIFFERENT MANUFACTURERS MAY NOT BE MIXED.
  • 10
    CONTROL UNIT. SENSOR SRS, WINDOWBAG BOSCH, A 698508 X 012426 EXEPT FOR VEHICULES WITH CODE 808 ALSO INSTALLED IN VEHICLE TO A 698507, X 012425 WITH CODE 809 MAKE SURE THAT ONLY CONTROL UNITS AND SENSORS FROM THE SAME MANIFACTURER,BOSCH OR TEMIC,ARE FITTED DURING REPAIR WORK. COMPO- NENTS FROM 2 DIFFERENT MANUFACTURERS MAY NOT BE MIXED.
  • 15
    TAPPING SCREW TRIGGER UNIT FASTENING 4,8X16
  • 20
    LOCK. CLIP-TYPE NUT
  • 25
    CONTROL UNIT BELT LOCKING RETRACTOR, AIRBAG AND SIDEBAG TEMIC, A 95470819990630 X 02827819990708 FORREPAIR WORK MAKE SURE THAT ONLY CONTROL UNITS AND SENSORS FROM THE SAME MANUFACTURER ARE INSTALLED. TWO DIFFERENT MANUFACTURERS MAY NOT BE USED.
  • 25
    CONTROL UNIT SRS, WINDOWBAG, A 698508 X 012426 EXEPT FOR VEHICULES WITH CODE 808 ALSO INSTALLED IN VEHICLE TO A 698507, X 012425 WITH CODE 809 MAKE SURE THAT ONLY CONTROL UNITS AND SENSORS FROM THE SAME MANIFACTURER,BOSCH OR TEMIC,ARE FITTED DURING REPAIR WORK. COMPO- NENTS FROM 2 DIFFERENT MANUFACTURERS MAY NOT BE MIXED.
  • 25
    CONTROL UNIT AIRBAG BELT LOCKING RETRACTOR, AIRBAG AND SIDEBAG TEMIC, A 95470819990630 X 02827819990708 FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. B 39799920010630 X 06199920010629, Replaced By: A0048200826
  • 25
    CONTROL UNIT BELT LOCKING RETRACTOR, AIRBAG AND SIDEBAG TEMIC, A 95470819990630 X 02827819990708 B 39799920010630 X 06199920010629 FORREPAIR WORK MAKE SURE THAT ONLY CONTROL UNITS AND SENSORS FROM THE SAME MANUFACTURER ARE INSTALLED. TWO DIFFERENT MANUFACTURERS MAY NOT BE USED., Replaced By: A0038203426
  • 25
    CONTROL UNIT , A 698508 X 012426 EXEPT FOR VEHICULES WITH CODE 808 ALSO INSTALLED IN VEHICLE TO A 698507, X 012425 WITH CODE 809, Replaced By: A0028203826
  • 30
    SCREW BRACKET TO COVERING
  • 30
    SCREWROCKINGER,TYP 59 U150
  • 50
    EL. CABLE AIRBAG, WINDOWBAG AND SIDEBAG, FRONT
  • 50
    EL. CABLE AIRBAG, WINDOWBAG AND SIDEBAG, FRONT AND REAR
  • 50
    EL. CABLE AIRBAG, WINDOWBAG AND SIDEBAG, FRONT AND REAR
  • 50
    EL. CABLE AIRBAG, WINDOWBAG AND SIDEBAG, FRONT
  • 55
    PLUG PLUG CONNECTION
  • 60
    PIN BUSHING HOUSING FRONT DOOR
  • 65
    PIN BUSHING HOUSING CONTACT SPIRAL PLUG-CONNECTION,A 123447
  • 70
    ROUND PIN BUSHING LIGHT SWITCH 2,5 MM
  • 75
    PIN BUSHING HOUSING
  • 80
    PLUGBUSKNOTEN (DACH)
  • 85
    PIN BUSHING HOUSING INSTRUMENT CLUSTER
  • 90
    CONTACT BUSHINGR 27, 0.75 MM2
  • 90
    REP.SET CONTACT0.75 MM2 MQS, CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS.SOLDER CONNECTOR SLEEVES:TOTAL WIRE CROSS-SECTION: A 001 546 99 41GREEN0.7 -2.4 MM2 A 002 546 00 41RED2.0 -4.0 MM2 A 002 546 01 41BLUE 3.5 -8.0 MM2 A 002 546 11 41YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2
  • 95
    BRACKET DIAGNOSIS BOX
  • 100
    ROUND PIN BUSHING1 MM
  • 105
    CONTACT SPRING UNIPOLAR 0.35-1.0 MM2
  • 105
    REP.SET CONTACT FUSE BLOCK 1.0 MM2 GSK1,F55/4 ,F55/5 ,F55/6, CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS.SOLDER CONNECTOR SLEEVES:TOTAL WIRE CROSS-SECTION: A 001 546 99 41GREEN0.7 -2.4 MM2 A 002 546 00 41RED2.0 -4.0 MM2 A 002 546 01 41BLUE 3.5 -8.0 MM2 A 002 546 11 41YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]