Поз.
Артикул
Описание
5
SENSOR DRIVER'S AIR BAG WITH BELT LOCKING RETRACTOR, IMPOTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER! C 013142 J 016700C 289605
5
SENSOR BELT LOCKING RETRACTOR, AIRBAG AND SIDEBAG, IMPOTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER! MAKE SURE THAT ONLY CONTROL UNITS AND SENSORS FROM THE SAME MANIFACTURER,BOSCH OR TEMIC,ARE FITTED DURING REPAIR WORK. COMPO- NENTS FROM 2 DIFFERENT MANUFACTURERS MAY NOT BE MIXED. F 125158 EXCEPT CODE 805 ALSO INSTALLED IN VEHICLE TO F 125157 WITH CODE 806
5
SENSOR , ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE!A 153290 A 328810 EXCEPT CODE 807 ALSO INSTALLED IN VEHICLE FROM A 328811 WITH CODE 806, Replaced By: A0018201026
5
SENSOR , ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE!A 153290 A 328810 EXCEPT CODE 807 ALSO INSTALLED IN VEHICLE FROM A 328811 WITH CODE 806, Replaced By: A0018201026
5
SENSOR , ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE!A 153290 A 328810 EXCEPT CODE 807 ALSO INSTALLED IN VEHICLE FROM A 328811 WITH CODE 806, Replaced By: A0008208026
5
SENSOR , MAKE SURE THAT ONLY CONTROL UNITS AND SENSORS FROM THE SAME MANIFACTURER,BOSCH OR TEMIC,ARE FITTED DURING REPAIR WORK. COMPO- NENTS FROM 2 DIFFERENT MANUFACTURERS MAY NOT BE MIXED., Replaced By: A0018202126
5
SENSOR , Replaced By: A0018201926
10
SCREW , Replaced By: A0009847929
20
SENSOR SIDEBAG BOSCH, ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE!
20
SENSOR SIDEBAG TEMIC, IMPOTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER! MAKE SURE THAT ONLY CONTROL UNITS AND SENSORS FROM THE SAME MANIFACTURER,BOSCH OR TEMIC,ARE FITTED DURING REPAIR WORK. COMPO- NENTS FROM 2 DIFFERENT MANUFACTURERS MAY NOT BE MIXED.
25
SHEET METAL SCREW BRACKET TO FLOOR PLATE