1. Главная
  2. Mercedes
  3. CAR
  4. S 280
  5. 220.163
  6. 33 FRONT AXLE
  7. 030 STEERING KNUCKLE AND CONTROL ARM

S 280 - 220.163 - 33 FRONT AXLE

  • Поз.
    Артикул
    Описание
  • 5
    STEERING KNUCKLE FRONT RIGHT
  • 5
    STEERING KNUCKLE FRONT LEFT
  • 10
    SUPPORTING JOINT LEFT AND RIGHT, Replaced By: A2203330727
  • 10
    SUPPORTING JOINT LEFT AND RIGHT
  • 15
    FRONT WHEEL HUB WITH BEARING
  • 16
    TAPERED ROLLER BEARING OUTSIDE, F 125158 EXCEPT CODE 805 ALSO INSTALLED IN VEHICLE TO F 125157 WITH CODE 806
  • 16
    TAPERED ROLLER BEARING INSIDE
  • 17
    SEAL RING WHEEL HUB
  • 25
    NUT FRONT WHEEL HUB TO STEERING KNUCKLE
  • 30
    SCREW CHARGE AIR PIPE TO ELECTRONIC GAS ACTUATOR M 6X25
  • 30
    HEXALOBULAR BOLTM6X25
  • 35
    LOCKING CAP FRONT WHEEL HUB TO STEERING KNUCKLE
  • 40
    TRANSVERSE CONTROL ARM BOTTOM RIGHT
  • 40
    SPRING CONTROL ARM BOTTOM LEFT & RIGHT, REPLACE AS PAIRS UP TO CHASSIS NUMBER A028009
  • 40
    TRANSVERSE CONTROL ARM BOTTOM LEFT
  • 45
    TS SPRING LINK PARTS KIT LEFT AND RIGHT, ONLY REPLACEABLE BY PAIRS
  • 45
    BEARING LEFT SPRING CONTROL ARM, ONLY REPLACEABLE BY PAIRS, Replaced By: A2203309107
  • 46
    BEARING SPRING CONTROL ARM
  • 47
    JOINT SPRING LINK TO TORSION BAR, UP TO IDENT NO. A 013598, ALSO ORDER TORSION BAR LINKAGE
  • 50
    FITTED BOLT FOR ADJUSTING WORK ONLY M14X1.5
  • 50
    BOLT THRUST ARM TO SUPPORT M14X1.5
  • 55
    SPACER DISK TORQUE STRUT TO FRAME-TYPE INT. SUPP.
  • 60
    HEXAGON NUT STEER. KNUCKLE TO TRAN. CON. ARM RIGHT M14X1,5
  • 64
    HEXAGON NUT STEER. KNUCKLE TO TRAN. CON. ARM RIGHT M14X1,5
  • 65
    STRUT BOTTOM LEFT
  • 65
    STRUT BOTTOM RIGHT
  • 65
    STRUT BOTTOM RIGHT, Replaced By: A2203305811
  • 65
    STRUT BOTTOM LEFT, Replaced By: A2203305711
  • 70
    BOLT THRUST ARM TO SUPPORT M14X1.5
  • 70
    FITTED BOLT FOR ADJUSTING WORK ONLY M14X1.5
  • 75
    SPACER DISK TORQUE STRUT TO FRAME-TYPE INT. SUPP.
  • 80
    HEXAGON NUT STEER. KNUCKLE TO TRAN. CON. ARM RIGHT M14X1,5
  • 84
    HEXAGON NUT STEER. KNUCKLE TO TRAN. CON. ARM RIGHT M14X1,5
  • 85
    TRANSVERSE CONTROL ARM TOP RIGHT
  • 85
    TRANSVERSE CONTROL ARM TOP, LEFT
  • 90
    HEXAGON HEAD BOLT BRACKET MOUNTING M10X100
  • 90
    BOLT. SCREW OIL FILTER TO CYLINDER CRANKCASE M 10X95
  • 95
    NUT EXHAUST PIPE AND PIPE CLAMP TO BRACKET
  • 100
    NUT STRAP TO BRACKET
  • 110
    TS BOLT PARTS KIT FOR ADJUSTING WORK ONLY
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]