1. Главная
  2. Mercedes
  3. CAR
  4. TYP 180b - 180c - 180Db - 180Dc BM 120.000, .001
  5. 120.002
  6. 35 REAR AXLE
  7. 021 SINGLE JOINT REAR AXLE

Mercedes A1809970430 - ЗАГЛУШКА РЕЗЬБОВАЯ

TYP 180b - 180c - 180Db - 180Dc BM 120.000, .001 120.002
35 REAR AXLE - 021 SINGLE JOINT REAR AXLE
  • Поз.
    Артикул
    Описание
  • 45
    REAR AXLE TUBE, LEFT, WITH THRUST ARM SUPPORT AND SCREW PLUG
  • 46
    REAR AXLE TUBE, RIGHT WITH THRUST ARM SUPPORT
  • 47
    BUSHING
  • 48
    SCREW PLUG , Replaced By: A0009972632
  • 49
    VALVE , EXHAUST STOCK OF OLD PARTS UP TO CHASSIS: 015 274020 017 053812 110 449932 114 020335 115 294560 117 092189, Replaced By: A1153500290
  • 53
    UNIVERSAL JOINT, SLIDING BEDDED IN NEEDLES
  • 54
    SPACER WASHER
  • 55
    LOCK
  • 56
    SLIDING SLEEVE WITH GUIDE PLATE
  • 57
    LOCK RING SHACKLE TO BEARING BRACKET,965965
  • 58
    ROLLERTO 387 460 14 09
  • 59
    SPACER WASHER
  • 60
    LOCK RING AS REQUIRED 1.75 MM
  • 61
    UNIVERSAL JOINT , 000,001,100,101 UP TO REAR AXLE 001286, 010 UP TO REAR AXLE 190027, 110 UP TO REAR AXLE 201639
  • 62
    SNAP RING 2.25 MM, 000,001,100,101 UP TO REAR AXLE 001286, 010 UP TO REAR AXLE 190027, 110 UP TO REAR AXLE 201639
  • 64
    SET SCREW , Replaced By: A1109970032
  • 65
    LOCK WASHER COMPRESSED AIR LINE TO BRACKET
  • 66
    SPACER WASHER 1.0 MM
  • 67
    BOOT , Replaced By: A1103570491
  • 68
    BOOT SPLIT
  • 69
    CLIPTO 343 357 00 22
  • 70
    REAR AXLE SHAFT, LEFT , UP TO REAR AXLE 9536210 AS OF REAR AXLE 9542731 FURTHERMORE INSTALLED IN 9536212, 9536213, 9536215 TO 9536218, 9536223, 9536224, 9536226, 9536227, 9537217 TO 9542480
  • 71
    WHEEL MOUNTING BOLT
  • 72
    REAR AXLE SHAFT, RIGHT
  • 73
    WHEEL MOUNTING BOLT
  • 74
    BALL BEARING , Replaced By: A0019811525
  • 75
    LOCK
  • 76
    GROOVED NUT
  • 77
    SCREW BRAKE CYLINDER TO BRAKE ANCHOR PLATE
  • 78
    SCREW
  • 81
    BRAKE DRUM , 010,10/50,20/60 UP TO CHASSIS 023660 EXCEPT FOR,SEE FOOTNOTE 40
  • 82
    SHPERICAL COLLAR NUT FOR BRAKE DRUM AT WHEEL BOLT, FRONT WHEEL HUB SEE ALSO GROUP 35 AND 40
  • 85
    PIN , 000,001,100,101 UP TO REAR AXLE 000286, 010 UP TO REAR AXLE 129302, 110 UP TO REAR AXLE 087839
  • 86
    SPACER TUBE
  • 87
    SPACER WASHER 2.0 MM
  • 88
    SPACER WASHER , Replaced By: A1803511452
  • 89
    SPACER RING
  • 90
    RUBBER RING
  • 91
    PIN
  • 92
    LOCK WASHER
  • 93
    NUT LEVER TO SHIFTING SHAFT
  • 94
    LOCK
  • 95
    EXPANSION PLUG
  • 96
    SPACER TUBE , 000,001,100,101 UP TO REAR AXLE 000286, 010 UP TO REAR AXLE 129302, 110 UP TO REAR AXLE 087839
  • 97
    LOCK
  • 98
    SCREW PLUG
  • 99
    GREASE NIPPLE LOCK ANGLE SENSOR
  • 100
    GREASE NIPPLE
  • 101
    RUBBER MOUNTING , 000,001,100,101 UP TO REAR AXLE 000286, 010 UP TO REAR AXLE 129302, 110 UP TO REAR AXLE 087839
  • 102
    SUPPORT WITH RETAINER(FOR REAR AXLE SUSPENSION), FROM CHASSIS 7503366 FROM REAR AXLE 7503237
  • 103
    SCREW , 000,001,100,101 FROM REAR AXLE 000287, 010 FROM REAR AXLE 129303, 110 FROM REAR AXLE 087840
  • 104
    LOCK WASHER COMPRESSED AIR LINE TO BRACKET
  • 105
    THRUST ARM, LEFT FOR REAR AXLE
  • 106
    THRUST ARM, RIGHT FOR REAR AXLE
  • 107
    CYLINDR.SCREW. CYLINDRICAL SCREW FOR MOUNTING SHOCK ABSORBER
  • 108
    CYLINDRICAL SCREW. CYLINDRICAL HEAD SCREW FOR SHOCK ABSORBER MOUNTING
  • 109
    RUBBER MOUNTING FOR THRUST ARM, REAR
  • 110
    TIGTHENING PLATE WHEEL SIDE FOR RUBBER MOUNTING FOR THRUST ARM AT REAR AXLE TUBE
  • 111
    TIGHTHENING PLATE. TIGHTENING PLATE THRUST ARM TO REAR AXLE TUBE
  • 112
    LOCKING PLATE FOR THRUST ARM AT REAR AXLE TUBE
  • 113
    HEX.-HD.SCREW. HEX. HEAD SCREW THRUST ARM TO REAR AXLE TUBE
  • 114
    RUBBER RING, BOTTOM FOR REAR AXLE SUSPENSION TO BODY FLOOR
  • 118
    WASHER. TIGHTENING PLATE TOP REAR AXLE SUSPENSION TO BODY FLOOR
  • 119
    LOCKING PLATE. LOCK PLATE REAR AXLE SUSPENSION, BOTTOM, TO BODY FLOOR
  • 120
    HEX. NUT. NUT
  • 121
    CROSS STRUT (REAR AXLE SUSPENSION TO BODY FLOOR), FROM CHASSIS 021839
  • 122
    NUT TRAILER COUPLING TO FRAME
  • 123
    BRACKET
  • 124
    RUBBER MOUNTING
  • 125
    BRACKET
  • 126
    HEX. HEAD. SCREW BRACKET TO BODY
  • 127
    SPRING WASHER
  • 128
    HEX. HEAD. SCREW SHACKLE TO CONSOLE
  • 129
    SPRING WASHER , Replaced By: N000137012203
  • 132
    RUBBER BUFFER CROSS STRUT TO BODY FLOOR BRACKET
  • 133
    CUP FOR RUBBER BUFFER CROSS STRUT TO BODY FLOOR, UP TO CHASSIS 024017
  • 134
    CUP FOR RUBBER BUFFER CROSS STRUT TO BODY FLOOR, AS OF CHASSIS 028442
  • 135
    HEX. NUT. NUT FUEL TANK TO CONSOLE,167609
  • 136
    NUT
  • 137
    RUBBER MOUNTING THRUST ARM TO BODY FLOOR
  • 138
    RETAINER THRUST ARM TO FRAME FLOOR UNIT, 010 UP TO CHASSIS 018282,012 UP TO CHASSIS 008703
  • 140
    NUT THRUST ARM TO FRAME FLOOR UNIT, 010 UP TO CHASSIS 030863,012 UP TO CHASSIS 063372
  • 999
    STRAP AIR HOSE TO ELBOW AND TO INTAKE CASE 570 MM, ORDER BY THE METER
  • 999
    LOOM TIE , Replaced By: N900262009100
  • 999
    HEX. HEAD. SCREW BEARING BRACKET TO TRANSMISSION
  • 999
    SCREW CONSOLE TO SIDE MEMBER M 12X1.5X35, UP TO IDENT NO. 734559 EXCEPT FOR 500001-599999
  • 999
    LOCK WASHER AIR DEHYDRATOR TO BRACKET
  • 999
    COTTER PIN , ON OM 352 126-PS ENGINE,UP TO ENGINE 041863
  • 999
    RUBBER SLEEVE
  • 999
    UNIVERSAL JOINT CROSS , Replaced By: A1113500028
  • 999
    SPACER WASHER 2.0 MM
  • 999
    SPACER WASHER 1.9 MM
  • 999
    SPACER WASHER 1.8 MM
  • 999
    SPACER WASHER 1.7 MM
  • 999
    SPACER WASHER 1.6 MM
  • 999
    SPACER WASHER 1.5 MM
  • 999
    SPACER WASHER 1.4 MM
  • 999
    SPACER WASHER 1.3 MM
  • 999
    SPACER WASHER 1.2 MM
  • 999
    SPACER WASHER 1.1 MM
  • 999
    THRUST WASHER AS REQUIRED 1.7 MM
  • 999
    THRUST WASHER , Replaced By: A1153530862
  • 999
    THRUST WASHER , Replaced By: A1153530962
  • 999
    THRUST WASHER , Replaced By: A1153531062
  • 999
    REAR AXLE SIDE GEAR, LEFT, 16 TEETH, HUB 36.3-MM DIA. REPAIR VERSION, NO LONGER AVAILABLE
  • 999
    LOCK
  • 999
    LOCK
  • 999
    DIFFERENTIAL CASE , 000,001,010 UP TO REAR AXLE 088702, 100,101,110 UP TO REAR AXLE 037327, Replaced By: A1103530101, +001A1103530048
  • 999
    LOCK
  • 999
    LOCK
  • 999
    TIGHTENING SCREW, INNER. TIGHTENING SCREW FOR YOKE, INNER
  • 999
    RETAINER RUBBER MOUNTING. RETAINER THRUST ARM TO BODY FLOOR, Replaced By: A1103520067
  • 999
    SPACER WASHER , Replaced By: A1803513152
  • 999
    SPACER WASHER AS REQUIRED 3.1 MM
  • 999
    SPACER WASHER AS REQUIRED 2.8 MM
  • 999
    SPACER WASHER , Replaced By: A1803513052
  • 999
    SPACER WASHER AS REQUIRED 2.7 MM
  • 999
    SPACER WASHER AS REQUIRED 2.6 MM
  • 999
    SPACER WASHER 3.0 MM
  • 999
    SPACER WASHER 2.5 MM
  • 999
    SPACER TUBE AS REQUIRED 25.8 MM
  • 999
    SPACER WASHER 2.4 MM
  • 999
    SPACER TUBE AS REQUIRED 25.6 MM
  • 999
    SPACER WASHER 2.3 MM
  • 999
    SPACER TUBE AS REQUIRED 25.4 MM
  • 999
    SPACER WASHER 2.2 MM
  • 999
    SPACER TUBE , Replaced By: A1803511653
  • 999
    SPACER WASHER 2.1 MM
  • 999
    SPACER TUBE AS REQUIRED 25.0 MM
  • 999
    SHACKLE OPTIONAL FOR CROSS ARM FOR REAR AXLE SUSPENSION AT BODY FLOOR
  • 999
    SHACKLE OPTIONAL FOR CROSS ARM FOR REAR AXLE SUSPENSION AT BODY FLOOR
  • 999
    RUBBER RING. RUBBER MOUNTING TOP REAR AXLE SUSPENSION, BOTTOM, TO BODY FLOOR
  • 999
    SPACER TUBE , AS OF CHASSIS 028442
  • 999
    SHACKLE OPTIONAL FOR CROSS ARM FOR REAR AXLE SUSPENSION AT BODY FLOOR
  • 999
    SHACKLE OPTIONAL FOR CROSS ARM FOR REAR AXLE SUSPENSION AT BODY FLOOR
  • 999
    CROSS STRUT. CROSS ARM FOR REAR AXLE SUSPENSION, BOTTOM, AT BODY FLOOR
  • 999
    WASHER , UP TO CHASSIS 028441
  • 999
    REAR AXLE SHAFT, RIGHT , Replaced By: A1803502710
  • 999
    REAR AXLE SHAFT, LEFT , Replaced By: A1803502610
  • 999
    REAR AXLE SIDE GEAR, RIGHT NO LONGER SUPPLIED AS A SPARE PART
  • 999
    DIFFERENTIAL GEAR,. DIFFERENTIAL GEAR, COMPLETE WITHOUT TAPERED ROLLER BEARING, RATIO 1:4.1 EXPORT FOR MADEIRA AND HONKONG
  • 999
    BREATHER FOR REAR AXLE TUBE
  • 999
    DRIVE PINION WITH RING GEAR RATIO 1:4.10 FOR TIRES 6.40-15
  • 999
    REAR AXLE, COMPLETE RATIO 1:4.1 WITH RIGHT-HAND DRIVE THE BUILT-IN COMPENSATING LEVER FOR HAND BRAKE HAS TO BE EXCHANGED WITH 120 4, Replaced By: A1213501700
  • 999
    SNAP RING 2.55 MM, 000,001,100,101 UP TO REAR AXLE 001286, 010 UP TO REAR AXLE 190027, 110 UP TO REAR AXLE 201639
  • 999
    SNAP RING 2.45 MM, 000,001,100,101 UP TO REAR AXLE 001286, 010 UP TO REAR AXLE 190027, 110 UP TO REAR AXLE 201639
  • 999
    SNAP RING 2.40 MM, 000,001,100,101 UP TO REAR AXLE 001286, 010 UP TO REAR AXLE 190027, 110 UP TO REAR AXLE 201639
  • 999
    SNAP RING 2.35 MM, 000,001,100,101 UP TO REAR AXLE 001286, 010 UP TO REAR AXLE 190027, 110 UP TO REAR AXLE 201639
  • 999
    BUSHING , Replaced By: A1113500028
  • 999
    SHIM 2.05 MM THICK OPTIONAL WITH 120 353 24 52/26 52
  • 999
    SHIM 2.00 MM THICK. SHIM, 2.00 MM THICK OPTIONAL
  • 999
    SHIM 1.90 MM THICK OPTIONAL WITH 120 353 24 52/26 52
  • 999
    SHIM 1.80 MM THICK. SHIM, 1.80 MM THICK OPTIONAL
  • 999
    SHIM 1.70 MM THICK. SHIM, 1.70 MM THICK OPTIONAL
  • 999
    SHIM 1.60 MM THICK OPTIONAL
  • 999
    SHIM 1.50 MM THICK. SHIM, 1.50 MM THICK OPTIONAL
  • 999
    SHIM 1.40 MM THICK OPTIONAL WITH 120 353 24 52/26 52
  • 999
    SHIM 1.30 MM THICK OPTIONAL WITH 120 353 24 52/26 52
  • 999
    SHIM 1.20 MM THICK OPTIONAL
  • 999
    SHIM 1.10 MM THICK OPTIONAL
  • 999
    REAR AXLE, COMPLETE RATIO 1:4.1 WITH RIGHT-HAND DRIVE THE BUILT-IN COMPENSATING LEVER FOR HAND BRAKE HAS TO BE EXCHANGED WITH 120 4, FOR VEHICLES FOR MADEIRA AND HONGKONG
  • 999
    RING , 000,001,010 FROM REAR AXLE 088703, 100,101,110 FROM REAR AXLE 037328
  • 999
    REAR AXLE HOUSING RATIO 1:3.9 WITH DIFFERENTIAL GEAR AND LEFT REAR AXLE TUBE, WITHOUT SLIDING JOINT, RIGHT REAR AXLE TUBE AND REAR, AS OF CHASSIS 024677
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]