Поз.
Артикул
Описание
14
DIFFERENTIAL GEAR LESS RING GEAR AND PINION, 201.023UP TO IDENT NO. A 366433 , F 343121 201.024UP TO IDENT NO. A 456128 , F 539196 EXCEPT FOR A 411067,A 418669,A 434248,A 437606,A 438142,A 438444,A 441817,A 442074,A 442076,A 444387,A 446081. F 456209,F 465655,F 488676,F 492064,F 497536,F 498653,F 506309,F 523900,F 523920,F 523947,F 537867.
14
DIFFERENTIAL GEAR LESS RING GEAR AND PINION, 201.024 USED WITH MANUAL FIVE-SPEED TRANSMISSION FROM IDENT NO. A 456129 , F 539197 ALSO INSTALLED ON: A 411067,A 418669,A 434248,A 437606,A 438142,A 438444,A 441817,A 442074,A 442076,A 444387,A 446081. F 456209,F 465655,F 488676,F 492064,F 497536,F 498653,F 506309,F 523900,F 523920,F 523947,F 537867.
17
THRUST WASHER AS REQUIRED 3.3 MM, WITH LINING ON ONE SIDE ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
17
THRUST WASHER AS REQUIRED 4,0 MM, WITH LINING ON ONE SIDE
17
THRUST WASHER AS REQUIRED 3.4 MM, WITH LINING ON ONE SIDE ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
17
THRUST WASHER AS REQUIRED 3,8 MM, WITH LINING ON ONE SIDE
17
THRUST WASHER AS REQUIRED 3.2 MM, WITH LINING ON ONE SIDE ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
17
THRUST WASHER AS REQUIRED 3.1 MM, WITH LINING ON ONE SIDE
17
THRUST WASHER AS REQUIRED 2.9 MM, WITH LINING ON ONE SIDE
17
THRUST WASHER AS REQUIRED 3,0 MM, WITH LINING ON ONE SIDE
17
THRUST WASHER AS REQUIRED 3.5 MM, WITH LINING ON ONE SIDE ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
17
THRUST WASHER AS REQUIRED 3.6 MM, WITH LINING ON ONE SIDE ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
17
THRUST WASHER AS REQUIRED 3,7 MM, WITH LINING ON ONE SIDE
17
THRUST WASHER AS REQUIRED 2,8 MM, WITH LINING ON ONE SIDE
20
SIDE GEAR ONLY USED WITH ASD
23
DIFFERENTIAL PINION
26
SPHERICAL WASHER
29
PIN
32
CLAMPING SLEEVE
35
THRUST WASHER LESS LINING, WITH 5 SHACKLES, ONLY USED WITH AUTOMATIC LIMITED-SLIP DIFFERENTIAL (A S D)
38
THRUST WASHER WITH LINING ON BOTH SIDES
41
THRUST WASHER LESS LINING, W/4 SHACKLES & 2 NOTCHES, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
44
RING GEAR AND PINION1:3.29, FOR ASD OR 4-MATIC USE REAR AXLE OIL A 001 989 17 03
44
RING GEAR AND PINION1:3.67, USE REAR AXLE OIL A 001 989 17 03
47
GEAR 28 TEETH
47
GEAR 29 TEETH
50
SCREW RING GEAR TO DIFFERENTIAL CASE
128
SPACER WASHER AS REQUIRED 2.10 MM, ONLY USED WITH AUTOMATIC LIMITED-SLIP DIFFERENTIAL (A S D)
128
SPACER WASHER AS REQUIRED 1.90 MM
128
SPACER WASHER AS REQUIRED 1.60 MM
128
SPACER WASHER AS REQUIRED 1.75 MM, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
128
SPACER WASHER AS REQUIRED 1.80 MM, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
128
SPACER WASHER AS REQUIRED 1.85 MM, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
128
SPACER WASHER AS REQUIRED 2.35 MM
128
SPACER WASHER AS REQUIRED 2.25 MM, ONLY USED WITH AUTOMATIC LIMITED-SLIP DIFFERENTIAL (A S D)
128
SPACER WASHER AS REQUIRED 2.05 MM
128
SPACER WASHER AS REQUIRED 2.00 MM
128
SPACER WASHER AS REQUIRED 1.55 MM, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
128
SPACER WASHER AS REQUIRED 2.30 MM, ONLY USED WITH AUTOMATIC LIMITED-SLIP DIFFERENTIAL (A S D)
128
SPACER WASHER AS REQUIRED 1.65 MM
128
SPACER WASHER AS REQUIRED 2.20 MM
128
SPACER WASHER AS REQUIRED 1.70 MM
128
SPACER WASHER AS REQUIRED 1.95 MM
128
SPACER WASHER AS REQUIRED 2.40 MM, ONLY USED WITH AUTOMATIC LIMITED-SLIP DIFFERENTIAL (A S D)
128
SPACER WASHER AS REQUIRED 1.50 MM
128
SPACER WASHER AS REQUIRED 2.15 MM
131
TAPERED ROLLER BEARING DRIVE PINION, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
134
SPACER BUSHING
137
THRUST WASHER
140
TAPERED ROLLER BEARING DRIVE PINION BEARING
143
THRUST WASHER
146
SEAL RING , Replaced By: A0259970047
149
FLANGE PROPELLER SHAFT 90 MM, ONLY USED WITH AUTOMATIC LOCKING DIFFERENTIAL (A S D)
149
FLANGE PROPELLER SHAFT
149
FLANGE , Replaced By: A2113500045, +002A0229979947
152
NUT , FROM CHASSIS: 007,008,015,017 219403 011 104138 060 107834 062 104361
152
NUT