1. Главная
  2. Mercedes
  3. CAR
  4. C 230 KOMPRESSOR
  5. 202.085
  6. 35 REAR AXLE
  7. 015 REAR AXLE HOUSING WITH DIFFERENTIAL IL. 1

C 230 KOMPRESSOR - 202.085 - 35 REAR AXLE

  • Поз.
    Артикул
    Описание
  • 5
    HOUSING REAR AXLE HOUSING WITH DIFFERENTIAL, AUTOMATIC FIVE-SPEED TRANSMISSION ETS 1:3.27, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 5
    HOUSING REAR AXLE HOUSING WITH DIFFERENTIAL, MANUAL FIVE-SPEED TRANSMISSION 1:3,45, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 8
    HOUSING ,F 870048
  • 8
    HOUSING , FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 11
    SCREW PLUG , Replaced By: A0009972632
  • 11
    SCREW PLUG
  • 53
    TAPERED ROLLER BEARING RING GEAR BEARING, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
  • 53
    TAPERED ROLLER BEARING RING GEAR BEARING, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 56
    LOCK AS REQUIRED 4.05 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
  • 56
    LOCK AS REQUIRED 4.15 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
  • 56
    LOCK AS REQUIRED 4.4 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
  • 56
    LOCK AS REQUIRED 4.40 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 56
    LOCK AS REQUIRED 4.50 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 56
    LOCK AS REQUIRED 3.85 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 56
    LOCK AS REQUIRED 4.1 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
  • 56
    LOCK AS REQUIRED 4.20 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 56
    LOCK AS REQUIRED 3,70 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 56
    LOCK AS REQUIRED 4.3 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
  • 56
    LOCK AS REQUIRED 3.95 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 56
    LOCK AS REQUIRED 3.85 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
  • 56
    LOCK AS REQUIRED 3.60 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 56
    LOCK AS REQUIRED 3.6 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
  • 56
    LOCK AS REQUIRED 4.45 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 56
    LOCK AS REQUIRED 3.8 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
  • 56
    LOCK AS REQUIRED 4.00 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 56
    LOCK AS REQUIRED 3.80 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 56
    LOCK AS REQUIRED 3.7 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
  • 56
    LOCK AS REQUIRED 4.50 MM
  • 56
    LOCK AS REQUIRED 4.30 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 56
    LOCK AS REQUIRED 4.15 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 56
    LOCK AS REQUIRED 4.2 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
  • 56
    LOCK AS REQUIRED 4.10 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 56
    LOCK AS REQUIRED 3.9 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
  • 56
    LOCK AS REQUIRED 3.95 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
  • 56
    LOCK AS REQUIRED 4.0 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
  • 56
    LOCK AS REQUIRED 4.60 MM
  • 56
    LOCK AS REQUIRED 3.90 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 56
    LOCK AS REQUIRED 4.05 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 80
    SEAL RING , Replaced By: A0259972647, +001A2203570690
  • 80
    SEAL RING INTERIOR FLANGE, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 80
    SEAL RING INTERIOR FLANGE, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD) FOR USE WITHOUT ACCELERATION SKID CONTROL (A S R)
  • 80
    SEAL RING INTERIOR FLANGE, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 83
    REPAIR KIT MOUNTING PARTS
  • 86
    FLANGE INSIDE, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD) FOR USE WITHOUT ACCELERATION SKID CONTROL (A S R)
  • 86
    FLANGE INSIDE, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 86
    FLANGE , Replaced By: A2083500145, +002A0229979847
  • 86
    FLANGE , Replaced By: A2203501145
  • 86
    FLANGE , Replaced By: A2203501845
  • 86
    FLANGE , Replaced By: A2203502545, +002A0259972647
  • 92
    SPACER WASHER AS REQUIRED 1.15 MM
  • 92
    SPACER WASHER AS REQUIRED 1.35 MM
  • 92
    SPACER WASHER AS REQUIRED 1.25 MM
  • 92
    SPACER WASHER AS REQUIRED 0.9 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
  • 92
    SPACER WASHER AS REQUIRED 1.2 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
  • 92
    SPACER WASHER AS REQUIRED 1.10 MM
  • 92
    SPACER WASHER AS REQUIRED 0.8 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
  • 92
    SPACER WASHER AS REQUIRED 0.7 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
  • 92
    SPACER WASHER AS REQUIRED 1.5 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
  • 92
    SPACER WASHER AS REQUIRED 1.0 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
  • 92
    SPACER WASHER AS REQUIRED 0.85 MM
  • 92
    SPACER WASHER AS REQUIRED 1.3 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
  • 92
    SPACER WASHER AS REQUIRED 0.95 MM, USED WITHOUT AUTOMATIC LOCKING DIFFERENTIAL (ASD)
  • 92
    SPACER WASHER AS REQUIRED 1.05 MM
  • 92
    SPACER WASHER AS REQUIRED 1.4 MM, REAR AXLE HOUSING WITH DIFFERENTIAL,LESS SIDE BEARING CABS 003 103239 007 087551 086 007106 093 008992 102,103 240183 105 231729 183 015395 190 021957 193 002093 200 027295 280 000777 283 003632
  • 95
    SNAP RING AS REQUIRED 1.40 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 95
    SNAP RING AS REQUIRED 2.20 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 95
    SNAP RING AS REQUIRED 2.35 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 95
    SNAP RING AS REQUIRED 2.40 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 95
    SNAP RING AS REQUIRED 2.10 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 95
    SNAP RING AS REQUIRED 1.70 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 95
    SNAP RING AS REQUIRED 1.50 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 95
    SNAP RING AS REQUIRED 2.30 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 95
    SNAP RING AS REQUIRED 1.60 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 95
    SNAP RING AS REQUIRED 1.75 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 95
    SNAP RING AS REQUIRED 1.85 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 95
    SNAP RING AS REQUIRED 1.65 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 95
    SNAP RING AS REQUIRED 2.00 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 95
    SNAP RING AS REQUIRED 2.05 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 95
    SNAP RING AS REQUIRED 1.35 MM
  • 95
    SNAP RING AS REQUIRED 1.45 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 95
    SNAP RING AS REQUIRED 1.95 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 95
    SNAP RING AS REQUIRED 1.30 MM
  • 95
    SNAP RING AS REQUIRED 2.25 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 95
    SNAP RING AS REQUIRED 1.80 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 95
    SNAP RING AS REQUIRED 1.55 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 95
    SNAP RING AS REQUIRED 2.15 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 95
    SNAP RING AS REQUIRED 1.90 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
  • 95
    SNAP RING AXLE SHAFT TO AXLE HOUSING
  • 134
    END COVERC 36 AMG
  • 134
    COVER END COVER, B 976853,F 258572
  • 137
    SCREW. HEXALOBULAR BOLT SUPPORT TO BRACKET M10X25
  • 137
    SCREW GUSSET PLATES AND REAR CROSS MEMBER TO SIDE MEMBERS
  • 140
    PIN LESS ABS
  • 152
    VALVE
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]