1. Главная
  2. Mercedes
  3. CAR
  4. S 55 AMG
  5. 220.173
  6. 33 FRONT AXLE
  7. 030 STEERING KNUCKLE AND CONTROL ARM

Mercedes A2203330071 - Болт подвески MERCEDES

S 55 AMG 220.173
33 FRONT AXLE - 030 STEERING KNUCKLE AND CONTROL ARM
  • Поз.
    Артикул
    Описание
  • 5
    STEERING KNUCKLE LEFT
  • 5
    STEERING KNUCKLE RIGHT
  • 5
    STEERING KNUCKLE FRONT LEFT
  • 5
    STEERING KNUCKLE FRONT RIGHT
  • 5
    STEERING KNUCKLE LEFT, THE OLD PART MUST NO LONGER BE INSTALLED, Replaced By: A2203303920
  • 5
    STEERING KNUCKLE RIGHT, THE OLD PART MUST NO LONGER BE INSTALLED, Replaced By: A2203304020
  • 10
    SUPPORTING JOINT LEFT AND RIGHT, Replaced By: A2203330727
  • 10
    SUPPORTING JOINT LEFT AND RIGHT
  • 15
    FRONT WHEEL HUB WITH BEARING
  • 15
    FRONT WHEEL HUB
  • 16
    TAPERED ROLLER BEARING INSIDE
  • 16
    TAPERED ROLLER BEARING OUTSIDE, F 125158 EXCEPT CODE 805 ALSO INSTALLED IN VEHICLE TO F 125157 WITH CODE 806
  • 16
    TAPERED ROLLER BEARING WHEEL HUB, INSIDE
  • 16
    TAPERED ROLLER BEARING INSIDE
  • 17
    SEAL RING WHEEL HUB
  • 17
    SEAL RING WHEEL HUB
  • 25
    NUT FRONT WHEEL HUB TO STEERING KNUCKLE
  • 30
    HEXALOBULAR BOLTM6X25
  • 30
    SCREW CHARGE AIR PIPE TO ELECTRONIC GAS ACTUATOR M 6X25
  • 35
    LOCKING CAP FRONT WHEEL HUB TO STEERING KNUCKLE
  • 40
    TRANSVERSE CONTROL ARM BOTTOM LEFT
  • 40
    SPRING CONTROL ARM BOTTOM LEFT & RIGHT, THE OLD PART MUST NO LONGER BE INSTALLED, Replaced By: A2153300607
  • 40
    SPRING CONTROL ARM BOTTOM LEFT, IMPORTANT: TO IDENT. A 320 070, EXCHANGE IN PAIRS ONLY., Replaced By: A2203309607
  • 40
    SPRING CONTROL ARM BOTTOM RIGHT, FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. A 32275920020911, Replaced By: A2203309707
  • 40
    TRANSVERSE CONTROL ARM RIGHT, IMPORTANT: TO IDENT. A 320 070, EXCHANGE IN PAIRS ONLY.
  • 40
    TRANSVERSE CONTROL ARM BOTTOM LEFT, IMPORTANT: TO IDENT. A 320 070, EXCHANGE IN PAIRS ONLY.
  • 40
    SPRING CONTROL ARM BOTTOM LEFT & RIGHT, REPLACE AS PAIRS UP TO CHASSIS NUMBER A028009
  • 40
    SPRING CONTROL ARM BOTTOM LEFT & RIGHT, ONLY REPLACEABLE BY PAIRS, Replaced By: A2153300707
  • 40
    TRANSVERSE CONTROL ARM BOTTOM RIGHT
  • 45
    BEARING LEFT AND RIGHT, ONLY REPLACEABLE BY PAIRS FOR VEHICLES WITH KIDNEY SHAPED RUBBER MOUNTS REPLACEMENT TO BEIN PAIRS, Replaced By: A2203309107
  • 45
    TS SPRING LINK PARTS KIT LEFT AND RIGHT, ONLY REPLACEABLE BY PAIRS
  • 46
    BEARING SPRING CONTROL ARM
  • 47
    JOINT SPRING LINK TO TORSION BAR, UP TO IDENT NO. A 013598, ALSO ORDER TORSION BAR LINKAGE
  • 47
    JOINT LEFT, Replaced By: A2113230068
  • 48
    JOINT , Replaced By: A2203520227
  • 48
    JOINT
  • 50
    FITTED BOLT FOR ADJUSTING WORK ONLY M14X1.5
  • 50
    BOLT THRUST ARM TO SUPPORT M14X1.5
  • 52
    PIN SPRING CONTROL ARM AT FRAME
  • 55
    SPACER DISK TORQUE STRUT TO FRAME-TYPE INT. SUPP.
  • 57
    INDEXING PLATE STRUT AT FRAME
  • 60
    HEXAGON NUT STEER. KNUCKLE TO TRAN. CON. ARM RIGHT M14X1,5
  • 62
    HEXAGON NUT EXTENSION TO REAR AXLE CARRIER
  • 64
    HEXAGON NUT STEER. KNUCKLE TO TRAN. CON. ARM RIGHT M14X1,5
  • 65
    STRUT BOTTOM LEFT
  • 65
    STRUT LEFT
  • 65
    STRUT RIGHT
  • 65
    STRUT BOTTOM RIGHT
  • 65
    STRUT LEFT, Replaced By: A2203305111
  • 65
    STRUT RIGHT, Replaced By: A2203305211
  • 65
    STRUT BOTTOM LEFT, Replaced By: A2203305711
  • 65
    STRUT BOTTOM RIGHT, Replaced By: A2203305811
  • 70
    BOLT THRUST ARM TO SUPPORT M14X1.5
  • 70
    PIN SPRING CONTROL ARM AT FRAME
  • 70
    FITTED BOLT FOR ADJUSTING WORK ONLY M14X1.5
  • 75
    INDEXING PLATE STRUT AT FRAME
  • 75
    SPACER DISK TORQUE STRUT TO FRAME-TYPE INT. SUPP.
  • 80
    HEXAGON NUT STEER. KNUCKLE TO TRAN. CON. ARM RIGHT M14X1,5
  • 80
    HEXAGON NUT EXTENSION TO REAR AXLE CARRIER
  • 84
    HEXAGON NUT STEER. KNUCKLE TO TRAN. CON. ARM RIGHT M14X1,5
  • 84
    NUT TRAILER COUPLING TO REAR CROSS MEMBER M 16
  • 85
    TRANSVERSE CONTROL ARM TOP RIGHT
  • 85
    TRANSVERSE CONTROL ARM TOP, LEFT
  • 90
    BOLT. SCREW OIL FILTER TO CYLINDER CRANKCASE M 10X95
  • 90
    HEXAGON HEAD BOLT BRACKET MOUNTING M10X100
  • 95
    NUT EXHAUST PIPE AND PIPE CLAMP TO BRACKET
  • 100
    NUT STRAP TO BRACKET
  • 110
    TS BOLT PARTS KIT FOR ADJUSTING WORK ONLY
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]