1. Главная
  2. Mercedes
  3. CAR
  4. S350 CGI 4MATIC
  5. 221.182
  6. 32 SPRINGS, SUSPENSION AND HYDRAULIC SYSTEM
  7. 232 COMPRESSOR AND CABLE SPECIFICATION

Mercedes A2203270253 - Распорн. трубка

S350 CGI 4MATIC 221.182
32 SPRINGS, SUSPENSION AND HYDRAULIC SYSTEM - 232 COMPRESSOR AND CABLE SPECIFICATION
  • Поз.
    Артикул
    Описание
  • 10
    COMPRESSOR PNEUMATIC SUSPENSION, WHEN REPLACING THE COMPRESSOR, AS A RULE THE ACTUATION RELAY K67 KG 54 TU 080 AIR COMPRESSOR IS TO BE REPLACED
  • 15
    CONNECTION PIPE SOCKET PRESSURE LINE TO COMPRESSOR
  • 20
    WASHER COMPRESSOR BEARING
  • 30
    RUBBER BUMPER COMPRESSOR BEARING
  • 40
    SPRING COMPRESSOR TO BRACKET
  • 50
    SPACER TUBE COMPRESSOR BEARING
  • 60
    HEXAGON NUT. NUT ELECTRIC CABLE TO ALTERNATOR
  • 70
    CABLE STRAP LINE MOUNTING 260X3.3MM
  • 80
    LINE HOLDER HOSE TO COMPRESSOR
  • 90
    BRACKET VALVE UNIT TO COMPRESSOR
  • 100
    VALVE BLOCK PNEUMATIC SUSPENSION, A 02365920090515
  • 105
    CONNECTOR DELIVERY LINE
  • 108
    CONNECTION PIPE SOCKET PRESSURE LINE TO COMPRESSOR
  • 110
    BOLT TO PRESSURE SENSOR
  • 120
    BRACKET VALVE BLOCK
  • 130
    RUBBER BUMPER COMPRESSOR
  • 140
    LINE COMPRESSOR TO VALVE UNIT, A 02119420080829
  • 150
    CABLE STRAP LINE MOUNTING 260X3.3MM
  • 160
    NUT BRACKET TO BODY SHELL M6
  • 170
    SCREW PROTECTIVE PLATE TO EXHAUST PIPE
  • 170
    SCREW BRACKET MOUNTING M6 X 20
  • 180
    NUT BRACKET TO BATTERY IMPLEMENT CARRIER M8
  • 190
    FILTER AIR SUSPENSION COMPRESSOR
  • 200
    RETAINING COLLAR
  • 210
    FILTER AIR CLEANER
  • 220
    SPRING HOSE CLAMP VENT LINE TO ENGINE OR RADIATOR 14.7-16.5 MM/ 12 MM, A 01842020000330
  • 230
    HEXALOBULAR BOLT BRACKET TO BRACKET M8X16
  • 240
    SPRING HOSE CLAMP VENT LINE TO ENGINE OR RADIATOR 14.7-16.5 MM/ 12 MM, A 01842020000330
  • 250
    PRESSURE LINE COMPRESSOR TO ACCUMULATOR
  • 260
    PRESSURE ACCUMULATOR AIR SUSPENSION COMPRESSOR
  • 265
    CONNECTOR PRESSURE LINE TO PRESSURE RESERVOIR
  • 270
    NUT BRACKET TO BATTERY IMPLEMENT CARRIER M8
  • 280
    PRESSURE LINE REPAIR SIZE, TO BE ADAPTED DURING ASSEMBLY ALSO ORDER CONNECTOR
  • 290
    CONNECTOR REPAIR SIZE
  • 900
    RECEPTACLE HOUSING RIGHT POWER WINDOW MOTOR 2-PIN SLK2.8,M10/2
  • 900
    PIN BUSHING HOUSING ENGINE COMPARTMENT/ENGINE CONNECTOR 2-PIN SLK2.8,X26/31
  • 901
    REP.SET CONTACT4.0 MM2 SLK, CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS.SOLDER CONNECTOR SLEEVES:TOTAL WIRE CROSS-SECTION: A 001 546 99 41GREEN0.7 -2.4 MM2 A 002 546 00 41RED2.0 -4.0 MM2 A 002 546 01 41BLUE 3.5 -8.0 MM2 A 002 546 11 41YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2
  • 901
    GASKETTO 001 545 24 81, A 218853 ALSO INSTALLED ON A 103237 - A 218851 WITH CODE 030 F 190066 ALSO INSTALLED ON F 159752 - F 190064 WITH CODE 030 EXCEPT FOR A 219847
  • 901
    CONTACT SPRING. PLUG SOCKET0,5-1,0
  • 910
    PLUG VALVE UNIT SELF-LEVELLING DEVICE 10-PIN MT2,Y36/6*1
  • 911
    GASKET BLACK 3.9 MM
  • 911
    CONTACT SPRING WITH DETENT 0.5-1.0 MM2
  • 911
    STOP PLUG. PLUG WHITE 0.5-1.0 MM2, PIN 01 - 56
  • 911
    CONTACT SPRING WITH DETENT 0.2-0.5 MM2
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]