1. Главная
  2. Mercedes
  3. VAN
  4. 324,309CDI,311CDI,313CDI,315CDI,318CDI
  5. 906.633
  6. 73 REAR DOORS
  7. 115 SLIDING DOOR RAIL AND SUSPENSION

Mercedes A9067660737 - НАПРАВЛЯЮЩАЯ

324,309CDI,311CDI,313CDI,315CDI,318CDI 906.633
73 REAR DOORS - 115 SLIDING DOOR RAIL AND SUSPENSION
  • Поз.
    Артикул
    Описание
  • 10
    ELECTRICAL WIRING HARNESS CLOSING ASSIST, RIGHT, 20130430
  • 10
    WIRING HARNESS CLOSING ASSIST, LEFT, 20130430
  • 60
    GUIDE RAIL
  • 60
    GUIDE RAIL LEFT
  • 65
    BASE TO GUIDE RAIL
  • 75
    PAD GUIDE RAIL TO BODY
  • 80
    NUT FENDER ON SIDE PANEL M6
  • 85
    BOLT RAIL ATTACHMENT,RIGHT M6X16
  • 110
    COVER , 9051QFT900A0030 BLACK
  • 110
    COVER LEFT, 9051QFT906A0100 BLACK
  • 210
    PLATE RIGHT
  • 210
    PLATE LEFT
  • 220
    HEXALOBULAR BOLT BRACKET ON TUBULAR SUPPORTING FRAMEWORK M6X12
  • 225
    RIVETED NUT. RIVET NUT BRACKET TO ORNAMENTAL GRILLE M6X14.5
  • 225
    RIVETED NUT REFRIGERANT LINE TO CAB REAR PANEL
  • 230
    DRIVE CLOSING ASSIST, RIGHT
  • 230
    DRIVE CLOSING ASSIST, LEFT
  • 260
    ECTS. DOOR CONTROL UNIT LEFT SLIDING DOOR PSD, PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE, Replaced By: A9064461332
  • 260
    ECTS. DOOR CONTROL UNIT SLIDING DOOR RIGHT PSD, PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE, Replaced By: A9064461232
  • 260
    ECTS. DOOR CONTROL UNIT SLIDING DOOR RIGHT PSD, PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE, Replaced By: A9064461132
  • 260
    LU CONTROL UNIT SLIDING DOOR RIGHT PSD, FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. S 29649620080404 20440404 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE, Replaced By: A9064461032
  • 260
    CTRL. UNIT SLIDING DOOR SLIDING DOOR RIGHT PSD, THE OLD PART MUST NO LONGER BE INSTALLED PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE, Replaced By: A9064460632
  • 260
    CTRL. UNIT SLIDING DOOR SLIDING DOOR RIGHT PSD, S 29649620080404 20440404 THE OLD PART MUST NO LONGER BE INSTALLED PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE, Replaced By: A9064460532
  • 260
    LU CONTROL UNIT SLIDING DOOR RIGHT PSD, PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE
  • 260
    LU CONTROL UNIT SLIDING DOOR RIGHT PSD, PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE
  • 270
    MOUNTING PLATE
  • 280
    PROTECTIVE CAP CONTROL UNIT
  • 300
    DRIVE LEFT
  • 300
    DRIVE RIGHT
  • 300
    DRIVE RIGHT, THE OLD PART MUST NO LONGER BE INSTALLED, Replaced By: A9067604203
  • 300
    DOOR ACTUATION LEFT, THE OLD PART MUST NO LONGER BE INSTALLED, Replaced By: A9067604103
  • 350
    HEXALOBULAR BOLT CAN NEUTRAL POINT ON EQUIPMENT PLATE M6X10, Replaced By: A0019844329
  • 360
    DOOR SLIDE MECHANISM RIGHT
  • 360
    CARRIAGE RIGHT, S 18059220070430 20440404, Replaced By: A9067603247
  • 360
    DOOR SLIDE MECHANISM LEFT, S 18059220070430 20440404, Replaced By: A9067603347
  • 360
    CARRIAGE RIGHT, S 18059120070430 20440404, Replaced By: A9067602847, +001A9067604203
  • 360
    CARRIAGE LEFT, S 18059120070430 20440404, Replaced By: A9067602747, +001A9067604103
  • 360
    DOOR SLIDE MECHANISM LEFT, S 18059220070430 20440404
  • 370
    TOOTHED BELT RIGHT, TO BE ADAPTED DURING ASSEMBLY, Replaced By: A0009930697
  • 370
    TOOTHED BELT RIGHT, TO BE ADAPTED DURING ASSEMBLY
  • 380
    PROTECTIVE STRIP RIGHT
  • 380
    PROTECTIVE STRIP RIGHT
  • 380
    PROTECTIVE STRIP LEFT
  • 380
    PROTECTIVE STRIP LEFT
  • 400
    OPERATING MECHANISM RIGHT
  • 410
    PAD OPERATING MECHANISM
  • 420
    CABLE LEFT
  • 450
    TAPPING SCREW. SHEET METAL SCREW REAR BUMPER
  • 450
    HEXALOBULAR BOLT SWITCH TO INSTRUMENT PANEL M4X16
  • 460
    LOCK , P 605731 R 000001
  • 500
    FELT STRIP25X2 MM, Replaced By: A0019832310
  • 500
    STRIP AT REAR PANEL 4 MM 50X130 MM, NOT USED
  • 510
    BRACKET PLUG MOUNTING 6.5 - 7 MM
  • 600
    CABLE DUCT RIGHT CARRIAGE
  • 600
    CABLE DUCT LEFT CARRIAGE
  • 610
    HEXALOBULAR BOLT BOTTOM LEFT SLIDING BASE
  • 610
    HEXALOBULAR BOLT HEIGHT ADJUSTMENT,LEFT M8X16
  • 750
    WIRING HARNESS ASSEMBLY LEFT LOADING COMPARTMENT SLIDING DOOR, STATE IDENT NO. WHEN ORDERING
  • 750
    WIRING HARNESS ASSEMBLY RIGHT LOADING COMPARTMENT SLIDING DOOR, STATE IDENT NO. WHEN ORDERING
  • 800
    PLUG CONNECTOR, INTERIOR/FUEL TANK 8 PIN SLK2.8,X18/3
  • 800
    PIN BUSHING HOUSING UNIPOLAR
  • 800
    PLUG HOUSING HEATER FLANGE CONNECTOR COVER
  • 800
    HOUSING SEPARATION POINT FOR REAR DOOR CONTROL UNIT POWER SUPPLY 2-PIN SLK2.8,X34/35
  • 800
    PLUG SOCKET , Replaced By: A0015455240, +001A0005459503
  • 800
    PLUG6 PIN SLK2.8,X25/4
  • 805
    BLIND PLUG GREY
  • 805
    FLAT PLUG LESS DETENT,BUT WITH CATCH FOR HOUSING 1.0-2.5 MM2
  • 805
    CONTACT SPRING1.5-2.5 MM2 SLK2.8,X99/4
  • 805
    PLUG PINX 209, 0.75 MM2
  • 805
    REP.SET CONTACT SAM CONTROL UNIT 2.5 MM2 SLK,N10, CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS.SOLDER CONNECTOR SLEEVES:TOTAL WIRE CROSS-SECTION: A 001 546 99 41GREEN0.7 -2.4 MM2 A 002 546 00 41RED2.0 -4.0 MM2 A 002 546 01 41BLUE 3.5 -8.0 MM2 A 002 546 11 41YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2
  • 805
    FLAT PLUG SILVER 0.75-1.0 MM2 SLK2.8
  • 805
    REP.SET CONTACT0.75 MM2 SLK2.8, CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS.SOLDER CONNECTOR SLEEVES:TOTAL WIRE CROSS-SECTION: A 001 546 99 41GREEN0.7 -2.4 MM2 A 002 546 00 41RED2.0 -4.0 MM2 A 002 546 01 41BLUE 3.5 -8.0 MM2 A 002 546 11 41YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2
  • 805
    GASKET ALTERNATOR 5.2 MM,G2
  • 805
    PLUG WITH SINGLE-WIRE SEAL 4.0 MM2 SLK2.8
  • 805
    FLAT PLUG LESS DETENT,BUT WITH CATCH FOR HOUSING 0.5-1.0 MM2
  • 805
    GASKET4.0 MM2
  • 805
    GASKET. BLIND PLUG BLUE
  • 805
    PIN BUSHING WITH DETENT AND WITH CATCH FOR HOUSING 2.5 MM2
  • 900
    CLUTCH. PLUG SOCKET CHARGING AIR,202740
  • 905
    CONTACT SPRING. PLUG SOCKET0,5-1,0
  • 905
    CONTACT SPRING. PLUG SOCKET1,0-2,5
  • 905
    GASKET
  • 905
    GASKETTO 001 545 24 81, A 218853 ALSO INSTALLED ON A 103237 - A 218851 WITH CODE 030 F 190066 ALSO INSTALLED ON F 159752 - F 190064 WITH CODE 030 EXCEPT FOR A 219847
  • 910
    CLUTCH FRONT SAM CONTROL MODULE 7-PIN MQS/MCP2.8
  • 910
    PLUG HOUSING DOOR CONTROL MODULE, LEFT 7-PIN MQS, MCP2.8
  • 910
    HOUSING SIGNAL ACQUISITION AND ACTUATION MODULE, PASSENGER SIDE 10-PIN SLK2.8,CODE A, N10
  • 910
    PIN BUSHING HOUSING INSTRUMENT CLUSTER 18 PIN, TO A0005454230,4430,0055452530
  • 915
    CONTACT SPRING0.5MM2-1.0MM2, A 843748 X 019421
  • 915
    CONTACT BUSHING LESS DETENT,BUT WITH CATCH FOR HOUSING 1.0-2.5 MM2
  • 915
    FEMALE CONTACT SWITCH, POWER WINDOW, DRIVER 0.25-0.5 MM2 MQS,S20
  • 915
    CONTACT BUSHINGR 27, 0.75 MM2
  • 915
    CONTACT SPRINGTO A 038 545 76 28
  • 915
    CONTACT SPRING0.22-0.5 MM2 SLK2.8
  • 940
    SOCKET HOUSING. PIN BUSHING HOUSING FRONT MIRROR R 27, 2 PIN
  • 940
    PIN BUSHING HOUSING ROOF SIGN 2-PIN MLK1.2,E14/4*2
  • 945
    BLIND PLUG. GASKET WITHE ELB 4
  • 945
    SEAL. GASKET YELLOW,V 215932
  • 945
    CRIMP RECEPTACLE CONTACT0.1-0.22 MM2 MLK1.2S
  • 945
    CRIMP RECEPTACLE CONTACT ,V 215932
  • 945
    BLIND PLUG ORANGE,V 215932
  • 945
    CRIMP RECEPTACLE CONTACT WITH SINGLE-WIRE SEAL 0.22-0.35 MM2 MLK1.2S
  • 945
    GASKETTO 001 540 99 81
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]